Stress Analysis of Artificial Bionic Knee Joint Based on UG6.0 NX NASTRAN_Journal of Biomedical Engineering

Authors：

SHIGengqiang

College of Medical Instrument and Food Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China;

Corresponding author：

Keywords：

bionic joint; stress analysis; artificial knee joint

DOI：

10.7507/1001-5515.20140025

Video：

Export PDF Favorites Scan Get Citation

Abstract Full text Figures/Tables Video References Cited by

This article introduces the basic principles of finite element analysis in biomechanics, focusing on the basic principles of a variety of finite element analysis software, and their respective characteristics. In addition, it also describes the basic stress analysis of UGNX6.0 NASTRAN analysis for artificial knee process, i.e. the choice of the type, material definition, the set of constants, finite element mesh division and the finite element results of the analysis. Finite element analysis and evaluation of the design of personalized artificial knee were carried out, so that the rationality of the geometric design of the structure of the experimental design of artificial knee has been verified.

Citation： SHIGengqiang. Stress Analysis of Artificial Bionic Knee Joint Based on UG6.0 NX NASTRAN. Journal of Biomedical Engineering, 2014, 31(1): 128-131. doi: 10.7507/1001-5515.20140025 Copy

1.	王臻,滕勇,李涤尘,等.基于快速成型的个体化人工半膝关节的研制-计算机辅助设计与制造[J].中国修复重建外科杂志,2004,18(5):347-351.
2.	滕勇,王臻,李涤尘,等.快速成型的个体化人工半膝关节的研制-股骨髁的三维建模[J].中国修复重建外科杂志,2004,18(4):257-260.
3.	陈作炳.人工关节CAD/CAM相关理论及其关键技术研究[D].武汉:武汉理工大学,2004.
4.	何金保.基于UG软件集成制造系统的研究与应用[D].昆明:昆明理工大学,2005.
5.	张建宏.基于功能的个性化人工膝关节设计研究[D].镇江:江苏大学,2007.
6.	郭晓东.用组织工程学技术修复骨缺损研究进展[J].国外医学·生物医学工程分册,2004,27(5):270-273.
7.	肖嵩华,郭义柱,张伯勋,等.人工全髋关节置换术后股骨应力变化的有限元分析[J].军医进修学院学报,2003,24(2):155-157.
8.	严世贵,吴浩波,陈维善,等.全髋关节置换后聚乙烯内衬应力的弹塑性有限元分析[J].中华骨科杂志,2004,24(4):211-215.
9.	石更强.利用激光扫描和计算机辅助设计/制造技术进行膝关节骨骼的仿生构建[J].中国组织工程研究与临床康复,2009,13(30):5819-5822.
10.	周飞虎.国人正常膝关节三维几何形态测量及相关研究[D].北京:中国人民解放军军医进修学院,2003.

1. 王臻,滕勇,李涤尘,等.基于快速成型的个体化人工半膝关节的研制-计算机辅助设计与制造[J].中国修复重建外科杂志,2004,18(5):347-351.
2. 滕勇,王臻,李涤尘,等.快速成型的个体化人工半膝关节的研制-股骨髁的三维建模[J].中国修复重建外科杂志,2004,18(4):257-260.
3. 陈作炳.人工关节CAD/CAM相关理论及其关键技术研究[D].武汉:武汉理工大学,2004.
4. 何金保.基于UG软件集成制造系统的研究与应用[D].昆明:昆明理工大学,2005.
5. 张建宏.基于功能的个性化人工膝关节设计研究[D].镇江:江苏大学,2007.
6. 郭晓东.用组织工程学技术修复骨缺损研究进展[J].国外医学·生物医学工程分册,2004,27(5):270-273.
7. 肖嵩华,郭义柱,张伯勋,等.人工全髋关节置换术后股骨应力变化的有限元分析[J].军医进修学院学报,2003,24(2):155-157.
8. 严世贵,吴浩波,陈维善,等.全髋关节置换后聚乙烯内衬应力的弹塑性有限元分析[J].中华骨科杂志,2004,24(4):211-215.
9. 石更强.利用激光扫描和计算机辅助设计/制造技术进行膝关节骨骼的仿生构建[J].中国组织工程研究与临床康复,2009,13(30):5819-5822.
10. 周飞虎.国人正常膝关节三维几何形态测量及相关研究[D].北京:中国人民解放军军医进修学院,2003.

Previous Article
Stress Analysis of Cervical Spine C4-C6 Under Frontal Impact Load
Next Article
Testing Method of Human Body's Current Threshold for Perception Based on EEG Analysis

Journal of Biomedical Engineering

Stress Analysis of Artificial Bionic Knee Joint Based on UG6.0 NX NASTRAN

Abstract Full text Figures/Tables Video References Cited by

Previous Article

Next Article

Format

Content