The compressive strength of the original bone tissue was tested, based on the raw human thigh bone,bovine bone,pig bone and goat bone. The four different bone-like apatites were prepared by calcining the raw bones at 800℃ for 8 hours to remove organic components. The comparison of composition and structure of bone-like apatite from different bone sources was carried out with a composition and structure test. The results indicated that the compressive strength of goat bone was similar to that of human thigh bone, reached (135.00±7.84) MPa; Infrared spectrum (IR), X-ray diffraction (XRD) analysis results showed that the bone-like apatite from goat bone was much closer to the structure and phase composition of bone-like apatite of human bones. Inductively Coupled Plasma (ICP) test results showed that the content of trace elements of bone-like apatite from goat bone was closer to that of apatite of human bone. Energy Dispersive Spectrometer (EDS) results showed that the Ca/P value of bone-like apatite from goat bone was also close to that of human bone, ranged to 1.73±0.033. Scanning electron microscopy (SEM) patterns indicated that the macrographs of the apatite from human bone and that of goat bone were much similar to each other. Considering all the results above, it could be concluded that the goat bone-like apatite is much similar to that of human bone. It can be used as a potential natural bioceramic material in terms of material properties.
Citation： FANXiaoxia, RENHaohao, CHENShutian, WANGGuangni, DENGTianyu, CHENXingtao, YANYonggang. Comparative Studies on the Material Performances of Natural Bone-like Apatite from Different Bone Sources. Journal of Biomedical Engineering, 2014, 31(2): 352-356. doi: 10.7507/1001-5515.20140066 Copy