The present paper proposed a central-driven structure of upper limb rehabilitation robot in order to reduce the volume of the robotic arm in the structure, and also to reduce the influence of motor noise, radiation and other adverse factors on upper limb dysfunction patient. The forward and inverse kinematics equations have been obtained with using the Denavit-Hartenberg (D-H) parameter method. The motion simulation has been done to obtain the angle-time curve of each joint and the position-time curve of handle under setting rehabilitation path by using SolidWorks software. Experimental results showed that the rationality with the central-driven structure design had been verified by the fact that the handle could move under setting rehabilitation path. The effectiveness of kinematics equations had been proved, and the error was less than 3°by comparing the angle-time curves obtained from calculation with those from motion simulation.
Citation: YIJinhua, YUHongliu, ZHANGYing, HUXin, SHIPing. Kinematics Modeling and Analysis of Central-driven Robot for Upper Limb Rehabilitation after Stroke. Journal of Biomedical Engineering, 2015, 32(6): 1196-1201. doi: 10.7507/1001-5515.20150212 Copy