1. |
Obregon F, Vaquette C, Ivanovski S, et al. Three-Dimensional bioprinting for regenerative dentistry and craniofacial tissue engineering. J Dent Res, 2015, 94(9, 2): 143S-152S.
|
2. |
Zhang Yali, Xia Lunguo, Zhai Dong, et al. Mesoporous bioactive glass nanolayer-functionalized 3D-printed scaffolds for accelerating osteogenesis and angiogenesis. Nanoscale, 2015, 7(45): 19207-19221.
|
3. |
Roohani-Esfahani S I, Newman P, Zreiqat H. Defects of 3D printed scaffolds with a mechanical strength comparable to cortical bone repair large fabrication. Sci rep, 2016, 6: 19468.
|
4. |
Murphy S V, Atala A. 3D bioprinting of tissues and organs. Nat Biotechnol, 2014, 32(8): 773-785.
|
5. |
Inzana J A, Olvera D, Fuller S M, et al. 3D printing of composite calcium phosphate and collagen scaffolds for bone regeneration. Biomaterials, 2014, 35(13): 4026-4034.
|
6. |
Gaetani R, Feyen D A, Verhage V, et al. Epicardial application of cardiac progenitor cells in a 3D-printed gelatin/hyaluronic acid patch preserves cardiac function after myocardial infarction. Biomaterials, 2015, 61: 339-348.
|
7. |
Chen C H, Shyu V B, Chen J P, et al. Selective laser sintered poly-epsilon-caprolactone scaffold hybridized with collagen hydrogel for cartilage tissue engineering. Biofabrication, 2014, 6(1): 015004.
|
8. |
Guo Ruijing, Lu Sichang, Page J M, et al. Fabrication of 3D scaffolds with precisely controlled substrate modulus and pore size by templated-fused deposition modeling to direct osteogenic differentiation. Adv Healthc Mater, 2015, 4(12): 1826-1832.
|
9. |
Russias J, Saiz E, Deville S, et al. Fabrication and in vitro characterization of three-dimensional organic/inorganic scaffolds by robocasting. J Biomed Mater Res A, 2007, 83A(2): 434-445.
|
10. |
张人佶, 颜永年, 林峰, 等. 低温快速成形与绿色制造. 制造技术与机床, 2008(4): 71-75.
|
11. |
Johnson C, Sheshadri P, Ketchum J M, et al. In vitro characterization of design and compressive properties of 3D-biofabricated/decellularized hybrid grafts for tracheal tissue engineering. J Mech Behav Biomed Mater, 2016, 59: 572-585.
|
12. |
Tarafder S, Dernell W S, Bandyopadhyay A A. SrO- and MgO-doped microwave sintered 3D printed tricalcium phosphate scaffolds: Mechanical properties and in vivo osteogenesis in a rabbit model. J Biomed Mater Res B Appl Biomater, 2015, 103(3): 679-690.
|
13. |
潘周娴, 陈适, 刘巍, 等. 医学三维打印材料分类及应用介绍. 基础医学与临床, 2015, 35(5): 702-706.
|
14. |
Eshraghi S, Das S. Micromechanical finite-element modeling and experimental characterization of the compressive mechanical properties of polycaprolactone–hydroxyapatite composite scaffolds prepared by selective laser sintering for bone tissue engineering. Acta Biomater, 2012, 8(8): 3138-3143.
|
15. |
Fan Jiabing, Park H, Lee M K, et al. Adipose-Derived stem cells and BMP-2 delivery in Chitosan-Based 3D constructs to enhance bone regeneration in a rat mandibular defect model. Tissue Eng Part A, 2014, 20(15/16): 2169-2179.
|
16. |
曹帅帅, 周苗, Miranda, 等. 三维打印 β-TCP 颌骨修复支架的生物学评价. 口腔医学研究, 2017, 33(7): 712-716.
|
17. |
袁景, 甄平, 赵红斌. 高性能多孔 β-磷酸三钙骨组织工程支架的 3D 打印. 中国组织工程研究, 2014(43): 6914-6921.
|
18. |
胡堃, 危岩, 李路海, 等. 3D 打印技术在生物医用材料领域的应用. 新材料产业, 2014(8): 33-39.
|
19. |
Qin Ling, Yao Dong, Zheng Lizhen, et al. Phytomolecule icaritin incorporated PLGA/TCP scaffold for steroid-associated osteonecrosis: Proof-of-concept for prevention of hip joint collapse in bipedal emus and mechanistic study in quadrupedal rabbits. Biomaterials, 2015, 59: 125-143.
|
20. |
Kim T H, Yun Y P, Park Y E, et al. In vitro and in vivo evaluation of bone formation using solid freeform fabrication-based bone morphogenic protein-2 releasing PCL/PLGA scaffolds. Biomed Mater, 2014, 9(2): 025008.
|
21. |
朱明, 柴岗, 李青峰. 3-D 打印技术在下颌前突畸形治疗中的应用. 中国修复重建外科杂志, 2014(3): 296-299.
|
22. |
鄢荣曾, 胡敏. 颞下颌关节三维有限元建模相关因素分析. 医用生物力学, 2016, 31(2): 182-187.
|
23. |
Shim J H, Yoon M C, Jeong C M, et al. Efficacy of rhBMP-2 loaded PCL/PLGA/β-TCP guided bone regeneration membrane fabricated by 3D printing technology for reconstruction of calvaria defects in rabbit. Biome Mater, 2014, 9(6): 065006.
|
24. |
Ou Kengliang, Hosseinkhani H. Development of 3D in vitro technology for medical applications. Int J Mol Sci, 2014, 15(10): 17938-17962.
|
25. |
Long Teng, Yang Jun, Shi Shanshan, et al. Fabrication of three-dimensional porous scaffold based on collagen fiber and bioglass for bone tissue engineering. J Biomed Mater Res B Appl Biomater, 2015, 103(7): 1455-1464.
|
26. |
Lee J Y, Choi B, Wu B, et al. Customized biomimetic scaffolds created by indirect three-dimensional printing for tissue engineering. Biofabrication, 2013, 5(4): 045003.
|
27. |
Abarrategi A, Moreno-Vicente C, Martínez-Vázquez F J, et al. Biological properties of solid free form designed ceramic scaffolds with BMP-2: in vitro and in vivo evaluation. PLoS One, 2012, 7(3): e34117.
|
28. |
Rasperini G, Pilipchuk S P, Flanagan C L, et al. 3D-printed Bioresorbable Scaffold for Periodontal Repair. J Dent Res, 2015, 94(9, 2): 153S-157S.
|