1. |
Faulkner-Jones A, Greenhough S, King JA, et al. Development of a valve-based cell printer for the formation of human embryonic stem cell spheroid aggregates. Biofabrication, 2013, 5(1):015013.
|
2. |
Rengier F, Mehndiratta A, von Tengg-Kobligk H, et al. 3D printing based on imaging data:review of medical applications. Int J Comput Assist Radiol Surg, 2010, 5(4):335-341.
|
3. |
Won S, Lee Y, Ha Y, et al. Improving pre-operative planning for complex total hip replacement with a Rapid Prototype model enabling surgical simulation. Bone Joint J, 2013, 95-B(11):1458-1463.
|
4. |
Sciberras N, Frame M, Bharadwaj R, et al. A novel technique for pre-operative planning of severe acetabular defects during revision hip arthroplasty. Bone Joint J, 2013, 95-B Suppl 30:63.
|
5. |
Zhang S, Liu X, Xu Y, et al. Application of rapid prototyping for temporomandibular joint reconstruction. J Oral Maxillofac Surg, 2011, 69(2):432-438.
|
6. |
Raaijmaakers M, Gelaude F, De Smedt K, et al. A custom-made guide-wire positioning device for hip surface replacement arthroplasty:description and first results. BMC Musculoskelet Disord, 2010, 11:161.
|
7. |
王臻, 腾勇, 李涤尘, 等. 基于快速成型的个体化人工半膝关节的研制——计算机辅助设计与制造. 中国修复重建外科杂志, 2004, 18(5):347-351.
|
8. |
He J, Li D, Lu B, et al. Custom fabrication of a composite hemi-knee joint based on rapid prototyping. Rapid Prototyping Journal, 2006, 12(4):198-205.
|
9. |
Benum P, Aamodt A, Nordsletten L. Customised femoral stems in osteopetrosis and the development of a guiding system for the preparation of an intramedullary cavity a report of two cases. J Bone Joint Surg (Br), 2010, 92(9):1303-1305.
|
10. |
Pang L, Hao W, Jiang M, et al. Bony defect repair in rabbit using hybrid rapid prototyping polylactic-co-glycolic acid/β-tricalciumphosphate collagen I/apatite scaffold and bone marrow mesenchymal stem cells. Indian J Orthop, 2013, 47(4):388-394.
|
11. |
Park SH, Park DS, Shin JW, et al. Scaffolds for bone tissue engineering fabricated from two different materials by the rapid prototyping technique:PCL versus PLGA. J Mater Sci Mater Med, 2012, 23(11):2671-2678.
|
12. |
Jiang CP, Chen YY, Hsieh MF. Biofabrication and in vitro study of hydroxyapatite/mPEG-PCL-mPEG scaffolds for bone tissue engineering using air pressure-aided deposition technology. Mater Sci Eng C, 2013, 33(2):680-690.
|
13. |
Lee CH, Cook JL, Mendelson A, et al. Regeneration of the articular surface of the rabbit synovial joint by cell homing:a proof of concept study. Lancet, 2010, 376(9739):440-448.
|
14. |
Woodfield TB, Malda J, de Wijn J, et al. Design of porous scaffolds for cartilage tissue engineering using a three-dimensional fiber-deposition technique. Biomaterials, 2004, 25(18):4149-4161.
|
15. |
Liu FH. Synthesis of bioceramic scaffolds for bone tissue engineering by rapid prototyping technique. J Sol-Gel Sci Technol, 2012, 64(3):704-710.
|
16. |
Quadrani P, Pasini A, Mattioli-Belmonte M, et al. High-resolution 3D scaffold model for engineered tissue fabrication using a rapid prototyping technique. Med Biol Eng Comput, 2005, 43(2):196-199.
|
17. |
Seitz H, Rieder W, Irsen S, et al. Three-dimensional printing of porous ceramic scaffolds for bone tissue engineering. J Biomed Mater Res B Appl Biomater, 2005, 74(2):782-788.
|
18. |
Mironov V, Trusk T, Kasyanov V, et al. Biofabrication:a 21st century manufacturing paradigm. Biofabrication, 2009, 1(2):022001.
|
19. |
Fedorovich NE, De Wijn JR, Verbout AJ, et al. Three-dimensional fiber deposition of cell-laden, viable, patterned constructs for bone tissue printing. Tissue Eng Part A, 2008, 14(1):127-133.
|
20. |
Xu T, Binder KW, Albanna MZ, et al. Hybrid printing of mechanically and biologically improved constructs for cartilage tissue engineering applications. Biofabrication, 2013, 5(1):015001.
|
21. |
Lee M, Wu BM. Recent advances in 3D printing of tissue engineering scaffolds. Methods Mol Biol, 2012, 868:257-267.
|