1. |
王正义, 姜保国. 中国现代足踝外科发展史. 中国骨与关节外科, 2012, 5(4): 285-286.
|
2. |
姜保国. 中国足踝外科现状与展望. 中国骨与关节外科, 2015, 8(4): 289-290.
|
3. |
杨志明. 加快发展 3-D 打印技术、扩展修复重建外科应用领域. 中国修复重建外科杂志, 2014, 28(3): 265.
|
4. |
Engel M, Hoffmann J, Castrillon-Oberndorfer G, et al. The value of three-dimensional printing modelling for surgical correction of orbital hypertelorism. Oral Maxillofac Surg, 2015, 19(1): 91-95.
|
5. |
Giesel FL, Hart AR, Hahn HK, et al. 3D reconstructions of the cerebral ventricles and volume quantification in children with brain malformations. Acad Radiol, 2009, 16(5): 610-617.
|
6. |
Guarino J, Tennyson S, McCain G, et al. Rapid prototyping technology for surgeries of the pediatric spine and pelvis: benefits analysis. J Pediatr Orthop, 2007, 27(8): 955-960.
|
7. |
Jeong HS, Park KJ, Kil KM, et al. Minimally invasive plate osteosynthesis using 3D printing for shaft fractures of clavicles: technical note. Arch Orthop Trauma Surg, 2014, 134(11): 1551-1555.
|
8. |
Schmauss D, Haeberle S, Hagl C, et al. Three-dimensional printing in cardiac surgery and interventional cardiology: a single-centre experience. Eur J Cardiothorac Surg, 2015, 47(6): 1044-1052.
|
9. |
Itagaki MW. Using 3D printed models for planning and guidance during endovascular intervention: a technical advance. Diagn Interv Radiol, 2015, 21(4): 338-341.
|
10. |
Silberstein JL, Maddox MM, Dorsey P, et al. Physical models of renal malignancies using standard cross-sectional imaging and 3-dimensional printers: a pilot study. Urology, 2014, 84(2): 268-272.
|
11. |
Hiramatsu H, Yamaguchi H, Nimi S, et al. Rapid prototyping of the larynx for laryngeal frame work surgery. Nihon Jibiinkoka Gakkai Kaiho, 2004, 107(10): 949-955.
|
12. |
Zein NN, Hanouneh IA, Bishop PD, et al. Three-dimensional print of a liver for preoperative planning in living donor liver transplantation. Liver Transpl, 2013, 19(12): 1304-1310.
|
13. |
Sun SP, Wu CJ. Using the full scale 3D solid anthropometric model in radiation oncology positioning and verification. Conf Proc IEEE Eng Med Biol Soc, 2004, 5: 3432-3435.
|
14. |
Liu YF, Xu LW, Zhu HY, et al. Technical procedures for template-guided surgery for mandibular reconstruction based on digital design and manufacturing. Biomed Eng Online, 2014, 13(1): 63.
|
15. |
Schepers RH, Raghoebar GM, Vissink A, et al. Fully 3-dimensional digitally planned reconstruction of a mandible with a free vascularized fibula and immediate placement of an implant-supported prosthetic construction. Head Neck, 2013, 35(4): E109-114.
|
16. |
Birnbaum K, Schkommodau E, Decker N, et al. Computer-assisted orthopedic surgery with individual templates and comparison to conventional operation method. Spine (Phila Pa 1976), 2001, 26(4): 365-370.
|
17. |
Daniel M, Watson J, Hoskison E, et al. Frontal sinus models and onlay templates in osteoplastic flap surgery. J Laryngol Otol, 2011, 125(1): 82-85.
|
18. |
Waran V, Narayanan V, Karuppiah R, et al. Utility of multimaterial 3D printers in creating models with pathological entities to enhance the training experience of neurosurgeons. J Neurosurg, 2014, 120(2): 489-492.
|
19. |
Knox K, Kerber CW, Singel SA, et al. Rapid prototyping to create vascular replicas from CT scan data: making tools to teach, rehearse, and choose treatment strategies. Catheter Cardiovasc Interv, 2005, 65(1): 47-53.
|
20. |
Zheng YX, Yu DF, Zhao JG, et al. 3D Printout Models vs. 3D-Rendered Images: Which Is Better for Preoperative Planning? J Surg Educ, 2016, 73(3): 518-523.
|
21. |
Li J, Chen M, Fan X, et al. Recent advances in bioprinting techniques: approaches, applications and future prospects. J Transl Med, 2016, 14(1): 271.
|
22. |
Bauermeister AJ, Zuriarrain A, Newman MI. Three-Dimensional Printing in Plastic and Reconstructive Surgery: A Systematic Review. Ann Plast Surg, 2015, 77(5): 569-576.
|
23. |
Martelli N, Serrano C, van den Brink H, et al. Advantages and disadvantages of 3-dimensional printing in surgery: A systematic review. Surgery, 2016, 159(6): 1485-1500.
|
24. |
Kacl GM, Zanetti M, Amgwerd M, et al. Rapid prototyping (stereolithography) in the management of intra-articular calcaneal fractures. Eur Radiol, 1997, 7(2): 187-191.
|
25. |
Chung KJ, Hong DY, Kim YT, et al. Preshaping plates for minimally invasive fixation of calcaneal fractures using a real-size 3D-printed model as a preoperative and intraoperative tool. Foot Ankle Int, 2014, 35(11): 1231-1236.
|
26. |
Chung KJ, Huang B, Choi CH, et al. Utility of 3D Printing for Complex Distal Tibial Fractures and Malleolar Avulsion Fractures: Technical Tip. Foot Ankle Int, 2015, 36(12): 1504-1510.
|
27. |
Yang L, Shang XW, Fan JN, et al. Application of 3D Printing in the Surgical Planning of Trimalleolar Fracture and Doctor-Patient Communication. Biomed Res Int, 2016, 2016: 2482086.
|
28. |
唐盛辉, 孙永建, 赵汉民, 等. 3D 打印技术辅助治疗高能量 Pilon 骨折的临床应用. 中国矫形外科杂志, 2015, 23(22): 2042-2046.
|
29. |
岳勇, 阿不来提•阿不拉, 杨勇, 等. 在 3-D 打印模型基础上微创螺钉及锁定钢板置入内固定修复踝关节骨折. 中国组织工程研究, 2015, 19(26): 4247-4252.
|
30. |
刘凯, 王红川, 蒋俊威, 等. 3D 打印辅助小切口复位内固定治疗跟骨骨折. 华西医学, 2016, 31(5): 859-862.
|
31. |
李玉泉, 曾参军, 李涛, 等. 3D 打印技术辅助儿童陈旧性距骨骨折的应用. 中国数字医学, 2016, 11(3): 75-77.
|
32. |
Mauffrey C, Barlow BT, Smith W. Management of segmental bone defects. J Am Acad Orthop Surg, 2015, 23(3): 143-153.
|
33. |
Alkenani NS, Alosfoor MA, Al-Araifi AK, et al. Ilizarov bone transport after massive tibial trauma: Case report. Int J Surg Case Rep, 2016, 28: 101-106.
|
34. |
Mauffrey C, Giannoudis PV, Conway JD, et al. Masquelet technique for the treatment of segmental bone loss have we made any progress? Injury, 2016, 47(10): 2051-2052.
|
35. |
Taylor GI, Corlett RJ, Ashton MW. The Evolution of Free Vascularized Bone Transfer: A 40-Year Experience. Plast Reconstr Surg, 2016, 137(4): 1292-1305.
|
36. |
Jeng CL, Campbell JT, Tang EY, et al. Tibiotalocalcaneal arthrodesis with bulk femoral head allograft for salvage of large defects in the ankle. Foot Ankle Int, 2013, 34(9): 1256-1266.
|
37. |
Hamid KS, Parekh SG, Adams SB, et al. Salvage of Severe Foot and Ankle Trauma With a 3D Printed Scaffold. Foot Ankle Int, 2016, 37(4): 433-439.
|
38. |
Hsu AR, Ellington JK. Patient-Specific 3-Dimensional Printed Titanium Truss Cage With Tibiotalocalcaneal Arthrodesis for Salvage of Persistent Distal Tibia Nonunion. Foot Ankle Spec, 2015, 8(6): 483-489.
|
39. |
Barnes JE. Manufacturing a human heel in titanium via 3D printing. Med J Aust, 2015, 202(3): 118.
|
40. |
Ki SW, Leung AK, Li AN. Comparison of plantar pressure distribution patterns between foot orthoses provided by the CAD-CAM and foam impression methods. Prosthet Orthot Int, 2008, 32(3): 356-362.
|
41. |
Telfer S, Abbott M, Steultjens M, et al. Dose-response effects of customised foot orthoses on lower limb muscle activity and plantar pressures in pronated foot type. Gait Posture, 2013, 38(3): 443-449.
|
42. |
Telfer S, Abbott M, Steultjens MP, et al. Dose-response effects of customised foot orthoses on lower limb kinematics and kinetics in pronated foot type. J Biomech, 2013, 46(9): 1489-1495.
|
43. |
Dombroski CE, Balsdon ME, Froats A. The use of a low cost 3D scanning and printing tool in the manufacture of custom-made foot orthoses: a preliminary study. BMC Res Notes, 2014, 7(1): 443.
|
44. |
Jastifer JR, Gustafson PA. Three-Dimensional Printing and Surgical Simulation for Preoperative Planning of Deformity Correction in Foot and Ankle Surgery. J Foot Ankle Surg, 2017, 56(1): 191-195.
|
45. |
Giovinco NA, Dunn SP, Dowling L, et al. A novel combination of printed 3-dimensional anatomic templates and computer-assisted surgical simulation for virtual preoperative planning in Charcot foot reconstruction. J Foot Ankle Surg, 2012, 51(3): 387-393.
|
46. |
高斌, 孙巧巧, 杨明, 等. 3D 打印技术辅助儿童复杂性扁平足手术临床应用. 中国数字医学, 2015, 10(5): 20-22.
|
47. |
Chae MP, Lin F, Spychal RT, et al. 3D-printed haptic " reverse” models for preoperative planning in soft tissue reconstruction: a case report. Microsurgery, 2015, 35(2): 148-153.
|