1. |
Mavrogenis AF, Abati CN, Romagnoli C, et al. Similar survival but better function for patients after limb salvage versus amputation for distal tibia osteosarcoma. Clin Orthop Relat Res, 2012, 470(6): 1735-1748.
|
2. |
董扬, 杜鑫辉. 胫骨远端恶性肿瘤瘤段切除大段异体骨移植术后临床效果分析. 中国骨肿瘤骨病, 2011, 10(6): 554-557.
|
3. |
沈嘉康, 蔡郑东, 华莹奇, 等. 灭活骨重建治疗胫骨远端骨肉瘤的临床应用. 中华骨科杂志, 2021, 41(16): 1108-1115.
|
4. |
李先安, 刘剑帆, 徐学政, 等. 牵拉成骨术治疗胫骨远端恶性肿瘤的疗效评价. 中国骨与关节杂志, 2018, 7(2): 127-131.
|
5. |
Angelini A, Kotrych D, Trovarelli G, et al. Analysis of principles inspiring design of three-dimensional-printed custom-made prostheses in two referral centres. Int Orthop, 2020, 44(5): 829-837.
|
6. |
Zhang C, Zeng B, Zhu K, et al. Limb salvage for malignant bone tumours of distal tibia with dual ipsilateral vascularized autogenous fibular graft in a trapezoid-shaped array with ankle arthrodesis and preserving subtalar joint. Foot Ankle Surg, 2019, 25(3): 278-285.
|
7. |
Guder WK, Hardes J, Nottrott M, et al. Highly cancellous titanium alloy (TiAl6V4) surfaces on three-dimensionally printed, custom-made intercalary tibia prostheses: Promising short- to intermediate-term results. J Pers Med, 2021, 11(5): 351. doi: 10.3390/jpm11050351.
|
8. |
Zhao D, Tang F, Min L, et al. Intercalary reconstruction of the “ultra-critical sized bone defect” by 3D-printed porous prosthesis after resection of tibial malignant tumor. Cancer Manag Res, 2020, 12: 2503-2512.
|
9. |
Enneking WF, Dunham W, Gebhardt MC, et al. A system for the functional evaluation of reconstructive procedures after surgical treatment of tumors of the musculoskeletal system. Clin Orthop Relat Res, 1993, (286): 241-246.
|
10. |
Kitaoka HB, Alexander IJ, Adelaar RS, et al. Clinical rating systems for the ankle-hindfoot, midfoot, hallux, and lesser toes. Foot Ankle Int, 1994, 15(7): 349-353.
|
11. |
Zhao Z, Yan T, Guo W, et al. Surgical options and reconstruction strategies for primary bone tumors of distal tibia: A systematic review of complications and functional outcome. J Bone Oncol, 2018, 14: 100209. doi: 10.1016/j.jbo.2018.100209.
|
12. |
Gross CE, Palanca AA, DeOrio JK. Design rationale for total ankle arthroplasty systems: An update. J Am Acad Orthop Surg, 2018, 26(10): 353-359.
|
13. |
Sultan AA, Mahmood B, Samuel LT, et al. Cementless 3D printed highly porous titanium-coated baseplate total knee arthroplasty: Survivorship and outcomes at 2-year minimum follow-up. J Knee Surg, 2020, 33(3): 279-283.
|
14. |
Fan H, Fu J, Li X, et al. Implantation of customized 3-D printed titanium prosthesis in limb salvage surgery: a case series and review of the literature. World J Surg Oncol, 2015, 13: 308. doi: 10.1186/s12957-015-0723-2.
|
15. |
牛天立, 杨毅, 梁海杰, 等. 胫骨下段3D打印踝关节融合型肿瘤假体在骨肉瘤广泛切除术中的应用. 中华骨科杂志, 2022, 42(5): 272-280.
|
16. |
Hardes J, von Eiff C, Streitbuerger A, et al. Reduction of periprosthetic infection with silver-coated megaprostheses in patients with bone sarcoma. J Surg Oncol, 2010, 101(5): 389-395.
|
17. |
Cordero J, Munuera L, Folgueira MD. The influence of the chemical composition and surface of the implant on infection. Injury, 1996, 27 Suppl 3: SC34-SC37.
|
18. |
Orr JW, Montz FJ, Barter J, et al. Continuous abdominal fascial closure: a randomized controlled trial of poly (L-lactide/glycolide). Gynecol Oncol, 2003, 90(2): 342-347.
|