Application Research on Machine Mixed Silicone Rubber and Alginate for the Oral Cavity Repair Impression_Chinese Journal of Evidence-Based Medicine

Authors：

 TANXiao-feng ¹ , ZHANGYe ¹ ,  BIXiao-qin ²

1. Department of Dental Implant, West China Stomatology Hospital, Sichuan University, Chengdu 610041, China;
2. Department of Oramaxillofacial Surgery, West China Stomatology Hospital, Sichuan University, Chengdu 610041, China;

Corresponding author：

BIXiao-qin, Email: hxbxq@163.com

Keywords：

Machine mixing silicone rubber; Alginate; Dental impression

DOI：

10.7507/1672-2531.20140047

Video：

Export PDF Favorites Scan Get Citation

Abstract Full text Figures/Tables Video References Cited by

Objective To compare the application of impression made with machine mixed silicone rubber and alginate on fixed partial denture. Methods The fixed prosthesis oral cavity repair patients were continuously enrolled who visited the department of Oramaxillofacial Surgery of West China Stomatology Hospital, Sichuan University form June 2010 to January 2011. They were randomly divided into two groups (machine mixed silicone rubber group and alginate group). After conventional row for teeth, both materials were used to make impression. Then, bubble condition and its grade caused by dental impression were evaluated. Statistical analysis has performed using SPSS 15.0. Results A total of 50 fixed prosthesis oral cavity repair patients were included, of which, 25 were in the machine mixed silicone rubber group and 25 in the alginate group. Compared with alginate, the impression made with machine mixed silicone rubber was higher of grade (Z=-3.890, P < 0.001), smoother (t=4.196, P < 0.001), higher precision than the alginate group. Conclusion Compared with alginate, the mixed silicone rubber for making oral fixed prosthesis machine impression is higher in precision, clearer in the gum line, which is good for late production of denture.

Citation： TANXiao-feng, ZHANGYe, BIXiao-qin. Application Research on Machine Mixed Silicone Rubber and Alginate for the Oral Cavity Repair Impression. Chinese Journal of Evidence-Based Medicine, 2014, 14(3): 268-270. doi: 10.7507/1672-2531.20140047 Copy

1.	张洪亮, 张则军, 王海宇, 等.排龈线在烤瓷冠桥修复中的应用.青岛大学医学院学报, 2000, 36(3):224.
2.	白石柱, 赵铱民, 叶晓岗.几种常用印模材料制取固定义齿模型的三维精度比较.实用口腔医学杂志, 2001, 17(3):239-241.
3.	Levartovsky S, Folkman M, Alter E, et al. Elastomeric impression Materials. Refuat Hapeh Vehashinayim, 2011, 28(2):54-64.
4.	陈治清.口腔材料学.第3版.北京:人民卫生出版社, 2003:42.
5.	郭翠, 张振庭.浸泡消毒对硅橡胶印模表面质量的影响.北京口腔医学, 2008, 1(5):263-265.
6.	柳文娟.硅橡胶印模材料表现湿润性的研究.国外医学:口腔医学分册, 2003, 30(6):464-467.
7.	邓宏燕, 张振庭.浸泡消毒对硅橡胶印模三维尺寸稳定性的影响.口腔颌面修复学杂志, 2008, 9(1):39-43.
8.	王剑.印模精度的影响因素.国外医学口腔医学分册, 2005, 32(4):317-319.
9.	阎俏梅, 欧阳芳瑾.三种模型材料在不同印模材料中尺寸变化的实验研究.口腔材料器械杂志, 1999(2):78-82.
10.	杨明.硅橡胶印模材料在口腔修复中的应用.广东牙病防治, 2005, 13(2):146-147.
11.	张洁辉, 孙健.藻酸盐印模材料特性及在口腔修复临床中的应用.口腔材料器械杂志, 2001, 10(2):94-95.
12.	文理衡, 刘清辉, 周琳.固定修复三种印模法临床效果的对比.现代口腔医学杂志, 2005, 19(2):116.
13.	张增瑞.两种印模材料制取固定义齿印模的效果比较.山西医科大学学报, 2011, 42(10):850-851.
14.	刘林娟, 许建辉, 张怀勤.三种制作上颌前牙桩核方法的临床效果比较.齐齐哈尔医学院学报, 2011, 32(1):12-13.
15.	张玲, 杨致芬, 赵彬, 等.不同印模材制取功能性印模法修复末端游离缺失疗效评价.中国实用口腔科杂志, 2012, 5(4):223-225.
16.	姜婷.个别托盘和选择性压力印模.口腔颌面修复学杂志, 2008, 9(1):62-66.
17.	周利根, 郭天文.高温消毒和浸泡消毒对义齿修复模型精度和硬度的影响.口腔医学, 2008, 28(7):368-369.
18.	谢斌, 侯景秋.琼脂/藻酸盐联合印模法用于残根残冠修复的临床研究.齐齐哈尔医学院学报, 2009, 30(11):1333-1334.
19.	苏晓晖, 邓素凡.义齿模型精度的比较.广西医科大学学报, 2003, 12(3):424-442.
20.	石连水.两种方法制取固定义齿印模的临床评价.华西口腔医学杂志, 2007, 25(5):485-486.

1. 张洪亮, 张则军, 王海宇, 等.排龈线在烤瓷冠桥修复中的应用.青岛大学医学院学报, 2000, 36(3):224.
2. 白石柱, 赵铱民, 叶晓岗.几种常用印模材料制取固定义齿模型的三维精度比较.实用口腔医学杂志, 2001, 17(3):239-241.
3. Levartovsky S, Folkman M, Alter E, et al. Elastomeric impression Materials. Refuat Hapeh Vehashinayim, 2011, 28(2):54-64.
4. 陈治清.口腔材料学.第3版.北京:人民卫生出版社, 2003:42.
5. 郭翠, 张振庭.浸泡消毒对硅橡胶印模表面质量的影响.北京口腔医学, 2008, 1(5):263-265.
6. 柳文娟.硅橡胶印模材料表现湿润性的研究.国外医学:口腔医学分册, 2003, 30(6):464-467.
7. 邓宏燕, 张振庭.浸泡消毒对硅橡胶印模三维尺寸稳定性的影响.口腔颌面修复学杂志, 2008, 9(1):39-43.
8. 王剑.印模精度的影响因素.国外医学口腔医学分册, 2005, 32(4):317-319.
9. 阎俏梅, 欧阳芳瑾.三种模型材料在不同印模材料中尺寸变化的实验研究.口腔材料器械杂志, 1999(2):78-82.
10. 杨明.硅橡胶印模材料在口腔修复中的应用.广东牙病防治, 2005, 13(2):146-147.
11. 张洁辉, 孙健.藻酸盐印模材料特性及在口腔修复临床中的应用.口腔材料器械杂志, 2001, 10(2):94-95.
12. 文理衡, 刘清辉, 周琳.固定修复三种印模法临床效果的对比.现代口腔医学杂志, 2005, 19(2):116.
13. 张增瑞.两种印模材料制取固定义齿印模的效果比较.山西医科大学学报, 2011, 42(10):850-851.
14. 刘林娟, 许建辉, 张怀勤.三种制作上颌前牙桩核方法的临床效果比较.齐齐哈尔医学院学报, 2011, 32(1):12-13.
15. 张玲, 杨致芬, 赵彬, 等.不同印模材制取功能性印模法修复末端游离缺失疗效评价.中国实用口腔科杂志, 2012, 5(4):223-225.
16. 姜婷.个别托盘和选择性压力印模.口腔颌面修复学杂志, 2008, 9(1):62-66.
17. 周利根, 郭天文.高温消毒和浸泡消毒对义齿修复模型精度和硬度的影响.口腔医学, 2008, 28(7):368-369.
18. 谢斌, 侯景秋.琼脂/藻酸盐联合印模法用于残根残冠修复的临床研究.齐齐哈尔医学院学报, 2009, 30(11):1333-1334.
19. 苏晓晖, 邓素凡.义齿模型精度的比较.广西医科大学学报, 2003, 12(3):424-442.
20. 石连水.两种方法制取固定义齿印模的临床评价.华西口腔医学杂志, 2007, 25(5):485-486.

Chinese Journal of Evidence-Based Medicine

Application Research on Machine Mixed Silicone Rubber and Alginate for the Oral Cavity Repair Impression

Abstract Full text Figures/Tables Video References Cited by

Previous Article

Next Article

Format

Content