ObjectiveTo investigate the effectiveness of butterfly shaped locking compression plate for the treatment of complex distal radius fractures. MethodsBetween June 2011 and January 2013, 20 cases of complex distal radius fractures were treated with butterfly shaped locking compression plate fixation. There were 11 males and 9 females with an average age of 54 years (range, 25-75 years). Injury was caused by falling in 10 cases, by traffic accident in 7 cases, and by falling from height in 3 cases. All of fractures were closed. According to AO classification system, there were 8 cases of type C1, 8 cases of type C2, and 4 cases of type C3. Of them, 9 cases had radial styloid process fracture, 4 cases had sigmoid notch fracture, and 7 cases had both radial styloid process fracture and sigmoid notch fracture. The mean interval between injury and operation was 5.2 days (range, 3-15 days). ResultsAll incisions healed by first intention; no complications of infection and necrosis occurred. All cases were followed up 14 months on average (range, 10-22 months). All factures healed after 9.3 weeks on average (range, 6-11 weeks). No complications such as displacement of fracture, joint surface subsidence, shortening of the radius, and carpal tunnel syndrome were found during follow-up. At last follow-up, the mean palmar tilt angle was 10.2°(range, 7-15°), and the mean ulnar deviation angle was 21.8°(range, 17-24°). The mean range of motion of the wrist was 45.3°(range, 35-68°) in dorsal extension, 53.5°(range, 40-78°) in palmar flexion, 19.8°(range, 12-27°) in radial inclination, 26.6°(range, 18-31°) in ulnar inclination, 70.2°(range, 45-90°) in pronation, and 68.4°(range, 25-88°) in supination. According to the Dienst scoring system, the results were excellent in 8 cases, good in 10 cases, and fair in 2 cases, and the excellent and good rate was 90%. ConclusionTreatment of complex distal radius fractures with butterfly shaped locking compression plate can reconstruct normal anatomic structures, especially for radial styloid process and sigmoid notch fractures, and it can get good functional recovery of the wrist and the distal radioulnar joint.
ObjectiveTo discuss the clinical result of extrinsic radioulnar tether combined with anchoring nail fixation for treating chronic dorsal instability of the distal radioulnar joint (DRUJ). MethodsBetween July 2011 and December 2012, 6 patients with chronic dorsal instability of the DRUJ were treated with extrinsic radioulnar tether combined with anchoring nail fixation. There were 1 male and 5 females with the average age of 27.3 years (range, 22-35 years). All of 6 patients had a wrist trauma history. The average disease duration was 4.8 years (range, 6 months to 15 years). Radiographs were taken postoperatively to observe the anchoring nail loosening. The stress test and forearm rotation test were used to evaluate the function of DRUJ. The complications, the grip power, range of motion, and visual analogue scale (VAS) scores were recorded at last follow-up. And the joint function was evaluated by disability of arm, shoulder, and hand (DASH) score. ResultsPrimary healing of incision was obtained in all cases, without any complications such as infection and ulnar neck fracture. All 6 patients were followed up 6-24 months (mean, 13.7 months). Stability was achieved in all patients. Radiographs showed that the joint space was widened and dislocation of the ulnar head was improved at 3 and 6 months after operation. The results of the stress test and forearm rotation test were negative. At last follow-up, the grip power, DASH score, VAS score, and range of motion of the wrist were significantly improved when compared with preoperative ones (P<0.05). ConclusionExtrinsic radioulnar tether combined with anchoring nail fixation is an easy method of surgical revision to treat chronic dorsal instability of DRUJ, which can maintain the stability and protect the blood supply of triangular fibrocartilage complex.
ObjectiveTo investigate the operative method of repairing soft tissue defect of the thumb with modified radial dorsal fasciocutaneous flap and its effectiveness.MethodsBetween June 2015 and December 2016, 15 patients with volar or dorsal defects of the thumb were treated with modified radial dorsal fasciocutaneous flaps which distal pedicles were cut off. Of 15 cases, 11 were male and 4 were female, aged 35-70 years (mean, 46 years). The causes of injury included crush injury in 12 cases and avulsion injury in 3 cases. Because all patients had volar or dorsal defects of the thumb which were accompanied by tendon or bone exposure, they had no condition or desire to replant. There were 12 cases of volar defect of thumb and 3 cases of dorsal defect. The area of defects ranged from 2.0 cm×1.2 cm to 3.0 cm×2.5 cm. The time between injury and operation was 16 hours to 2 days (mean, 30.4 hours). The radial dorsal fascio-cutaneous flaps of 2.3 cm×1.5 cm to 3.3 cm×2.8 cm in size were adopted to repair defects. The donor sites were directly sutured.ResultsAll flaps survived, and no severe swelling or tension blister occurred. The donor sites and wounds healed by first intention. All patients were followed up 3-12 months (mean, 6 months). The color and texture of the grafted flaps were similar to those of normal skin, with no bloated appearance. According to total active motion standard at last follow-up, the finger function was excellent in 8 cases and good in 7 cases.ConclusionModified radial dorsal fasciocutaneous flap of the thumb is a reliable flap with easy dissection and less trauma in repair of soft tissue defects of the thumbs, and satisfactory clinical outcome can be obtained.
ObjectiveTo evaluate the effectiveness of indirect fixation of the 3rd tarsometatarsal joint in the treatment of high-energy Lisfranc injury.MethodsBetween February 2015 and February 2019, 15 patients with high-energy Lisfranc injury were treated. There were 12 males and 3 females with an average age of 44.8 years (range, 29-73 years). The average time from injury to admission was 8.8 hours (range, 2-28 hours). According to Myerson classification, there were 6 cases of type A, 4 cases of type B2, 1 case of type C1, and 4 cases of type C2; 8 cases were open injury. The 3rd tarsometatarsal joint was injured in all patients, including intact intermetatarsal ligament in 7 cases, the 2nd-3rd intermetatarsal ligament injury in 6 cases, the 3rd-4th intermetatarsal ligament injury in 1 case, and the 2nd-3rd-4th intermetatarsal ligament injury in 1 case. Among them, the 3rd tarsometatarsal joint was not fixed directly and indirectly fixed by stabilized the 2nd and 4th tarsometatarsal joints in 13 cases. The 3rd tarsometatarsal joint was fixed with Kirschner wire in 2 cases for 1 patient had complete injury of the intermetatarsal ligament and the other 1 had comminuted fracture of the base of the 3rd metatarsal. The reduction of fracture and dislocation was evaluated by X-ray films, focusing on the re-displacement of the 3rd tarsometatarsal joint. The effectiveness was evaluated by American Orthopaedic Foot and Ankle Society (AOFAS) score and visual analogue scale (VAS) score.ResultsThirteen of the 15 patients were followed up 12-26 months, with an average of 15.6 months. One case had superficial infection of the incision and healed after symptomatic treatment; the other incisions healed by first intention. At last follow-up, the VAS score was 0-3 (mean, 1.1) and the AOFAS score was 70-99 (mean, 87.5). Twelve patients achieved anatomical reduction and 1 patient had increased talar-first metatarsal angle and the mild forefoot abduction. During the follow-up, no loss of reduction of the 3rd tarsometatarsal joint was found, while the spontaneous fusion of the joint was observed in 2 patients.ConclusionIn high-energy Lisfranc injury, as long as the intermetatarsal ligament is not completely destroyed and the bony structure of the tarsometatarsal joint is intact, the 3rd tarsometatarsal joint does not need to be fixed routinely, the stability of the joint can be obtained indirectly by fixing the adjacent tarsometatarsal joint.
Objective To establish the finite element model of varus-type ankle arthritis and to implement the finite element mechanical analysis of different correction models for tibial anterior surface angle (TAS) in supramalleolar osteotomy. Methods A female patient with left varus-type ankle arthritis (Takakura stage Ⅱ, TAS 78°) was taken as the study object. Based on the CT data, the three-dimensional model of varus-type ankle arthritis (TAS 78°) and different TAS correction models [normal (TAS 89°), 5° valgus (TAS 94°), and 10° valgus (TAS 99°)] were created by software Mimics 21.0, Geomagic Wrap 2021, Solidworks 2017, and Workbench 17.0. The 290 N vertical downward force was applied to the upper surface of the tibia and 60 N vertical downward force to the upper surface of the fibula. Von Mises stress distribution and stress peak were calculated. Results The finite element model of normal TAS was basically consistent with biomechanics of the foot. According to biomechanical analysis, the maximum stress of the varus model appeared in the medial tibiotalar joint surface and the medial part of the top tibiotalar joint surface. The stress distribution of talofibular joint surface and the lateral part of the top tibiotalar joint surface were uniform. In the normal model, the stress distributions of the talofibular joint surface and the tibiotalar joint surface were uniform, and no obvious stress concentration was observed. The maximum stress in the 5° valgus model appeared at the posterior part of the talofibular joint surface and the lateral part of the top tibiotalar joint surface. The stress distribution of medial tibiotalar joint surface was uniform. The maximum stress of the 10° valgus model appeared at the posterior part of the talofibular joint surface and the lateral part of the top tibiotalar joint surface. The stress on the medial tibiotalar joint surface increased. Conclusion With the increase of valgus, the stress of ankle joint gradually shift outwards, and the stress concentration tends to appear. There was no obvious obstruction of fibula with 10° TAS correction. However, when TAS correction exceeds 10° and continues to increase, the obstruction effect of fibula becomes increasingly significant.