west china medical publishers
Author
  • Title
  • Author
  • Keyword
  • Abstract
Advance search
Advance search

Search

find Author "姜庆丰" 3 results
  • 乳腺癌保乳术后加速部分乳腺放射治疗的临床应用现状

    基于对大多数乳腺癌复发部位多位于原发灶附近的临床观察,一种相对于全乳腺放射治疗(WBI)的照射区域更小、治疗总时间更短而疗效相当的新放射治疗技术——加速部分乳腺放射治疗(APBI)在临床中得以运用。APBI技术放射治疗总剂量为38.5 Gy,3.85 Gy/次,2次/d,且每2次间隔时间不<6 h。WBI有长时间的临床实践依据肯定治疗效果,而APBI长期临床数据尚不完善,所以目前在选择APBI技术时需谨慎。合理的患者纳入标准、准确的照射靶区确定、长期的疗效评价成为APBI目前的研究热点。现对APBI最近的应用现状进行综述。

    Release date: Export PDF Favorites Scan
  • 摆位系统误差对乳腺癌调强放射治疗剂量分布的影响

    目的探究摆位系统误差对乳腺癌患者实施调强放射治疗的剂量学影响。 方法2012年10月对一典型乳腺癌改良根治术后患者分别设计常规三维适形切线野(CRT)、多野静态调强(s-IMRT)、旋转调强(VMAT)3种不同治疗技术的计划,在计划中将治疗中心点向患者左、右、腹、背、头、脚方向分别平移3、6 mm模拟2种不同程度的系统误差,共计39个计划与原计划进行比较,观察不同治疗技术间、不同平移距离,不同方向上的靶区及主要危及器官患侧肺和心脏的剂量变化。 结果对于3 mm摆位系统误差,靶区D95%于向背侧s-IMRT降低4.0%,VMAT降低3.5%,向右(患侧)s-IMRT降低3.0%,VMAT降低2.8%,其余均方向降低且<1.6%。对于主要危及器官,系统误差对s-IMRT技术的患侧肺接受20 Gy剂量的体积影响大,对VMAT技术的患侧肺接受10 Gy剂量的体积影响大。除此外,对主要危及器官患侧肺及其他剂量参数影响均小(3 mm<3%,6 mm<6%)。系统误差对3D-CRT技术的影响小(3 mm<3%,6 mm<6%)。6 mm的系统误差对靶区及危及器官的影响与3 mm趋势一致,仅变化程度更大,两种调强技术的靶区D95%降低>5%。 结论对乳腺癌改良根治术后的呈弧段状、位于胸廓表面的放射治疗靶区,s-IMRT和VMAT方式的调强治疗技术对治疗摆位系统误差的影响程度相当,但较CRT技术更敏感,其中以向患者背侧、健侧方向偏移影响最大。改良根治术后乳腺癌调强治疗的实施需要有较三维治疗更高的位置精度保证。

    Release date: Export PDF Favorites Scan
  • Impacts of Parameter Settings on the Quality of Plans for the Volumetric Modulated Arc Therapy with Monaco Treatment Planning System

    【摘要】 目的 研究Monaco治疗计划系统中不同参数设置对容积旋转调强放射治疗(VMAT)计划质量的影响,得出更合理的治疗计划参数设置以提高VMAT治疗质量。 方法 2010年1-5月间治疗3例患者,为食管癌、宫颈癌和鼻咽癌各1例,分别设置不同的计划参数进行容积旋转调强计划优化,通过多种评估指标比较各VMAT计划质量的差异,得出临床所需的MSC、MSS、SSF、Sm、MMS和MDR共6个治疗计划参数对VMAT治疗质量的影响。 结果 MSC、MSS和SSF的3个参数对VMAT治疗质量不产生影响,有影响的Sm、MMS和MDR参数中,随着Sm和MMS值的增大,VMAT计划的剂量分布逐渐变差,但控制点数、机器跳数和照射时间均逐渐减小;随着MDR值增大,VMAT治疗的剂量分布先逐渐变差后不变,控制点数和机器跳数均是先增大后不变,而照射时间是先减小后不变。 结论 Sm、MMS和MDR 3个参数对VMAT计划质量有较大影响,对不同的患者,设置合适的Sm、MMS和MDR值对提高计划质量非常重要。【Abstract】 Objective To investigate the impacts of parameter settings on the quality of plans for the volumetric modulated arc therapy (VMAT) with Monaco treatment planning system. Methods Three patients who underwent VMAT from January to May 2010 were selected. The planning optimizations were processed by setting different planning parameters, including MSC, MSS, SSF, Sm, MMS and MDR, respectively. Then the quality of each plan with a certain set of parameters was evaluated by various evaluation indexes. The differences of quality among different plans were analyzed by comparing these indexes. Results There was no influence on the quality of VMAT planning for the parameter MSC, MSS and SSF to be set with different values. However, the other three parameters, MSC, MSS and SSF , affected the quality of VMAT planning with different values. Along with the aggrandizement of Sm and MMS value, the dose distribution of VMAT plans gradually became bad, while the number of control points, machine monitor units and irradiation time were gradually reduced. And along with the aggrandizement of MDR value, the dose distribution of VMAT plans became bad gradually until a constant state was reached, and both the number of control points and machine monitor units increased at first and then kept constant, while irradiation time decreased at first and then kept constant. Conclusion The selections of parameter Sm, MMS and MDR impact the quality of VMAT planning greatly. It is very important to set the suitable value of Sm, MMS and MDR to get the best planning quality for patients with different complexity.

    Release date:2016-08-26 02:21 Export PDF Favorites Scan
1 pages Previous 1 Next

Format

Content