Objective To review the progress of total ankle arthroplasty (TAA) in treatment of end-stage ankle osteoarthritis (AOA). Methods The domestic and foreign literatures about TAA in recent years were reviewed. The current status and progress of TAA were summarized from the results of traditional and computer-assisted TAA clinical outcomes. Results End-stage AOA often leads to severe pain and dysfunction, and arthrodesis is still the main selective treatment option. In recent years, with the advancement of surgical techniques and prosthesis design, TAA which can remain joint mobility has increased gradually, and the surgical results also have significant progress. Accurate prosthesis implant and mechanical alignment restoration are critical factors for TAA, and surgery-related malalignment is correlative to the prosthesis failure. Computer assisted patient-specific guide can simplify the TAA procedures and obtain the accuracy of tibia and talus osteotomy. Conclusion The clinical efficiency of preoperative CT based patient-specific guide technology for TAA needs further clinical follow-up. Meanwhile, it is necessary to further develop intraoperative navigation and robotic surgery system suitable for TAA.
ObjectiveTo explore the efficacy and safety of the axial load mechanical testing for removing external fixator. MethodsBetween January 2014 and August 2015, 27 patients with tibia and fibula fractures caused by trauma underwent an external fixation. Of 27 patients, 21 were male and 6 were female with the average age of 45 years (range, 19-63 years), including 7 cases of closed fracture and 20 cases of open fracture. X-ray film results showed spiral unstable fracture in 4 cases and comminuted unstable fracture in 23 cases. All patients underwent an external fixation. Bone nonunion occurred in 3 cases because of infection, and bone nonunion combined with bone defect occurred in 1 case, who received tibial osteotomy lengthening surgery. When X-ray film showed continuity high density callus formation at fracture site, axial load mechanical test was performed. If the axial load ratio of external fixator was less than 10%, the external fixator was removed. ResultsAt 21-85 weeks after external fixation (mean, 44 weeks), axial load mechanical test was performed. The results showed that the axial load ratio of external fixation was less than 10% in 26 cases, and the external fixator was removed; at 6 weeks after removal of external fixator, the patients could endure full load and return to work, without re-fracture. The axial load ratio was 14% in 1 case at 85 weeks, and the X-ray film result showed that fracture did not completely heal with angular deformity; re-fracture occurred after removing external fixator, and intramedullary fixation was used. ConclusionExternal fixator axial load mechanical testing may objectively reveal and quantitatively evaluate fracture healing, so it is safe and reliable to use for guiding the external fixator removal.
ObjectiveTo investigate the anatomical characters of the sustentaculum tali (ST), accurate entry point and direction for the placement of ST screw from posterior subtalar joint facet to the constant fragment (CF) in calcaneal fractures.MethodsA total of 100 patients with calcaneal fractures performed ankle CT scans were enrolled between January 2016 and April 2016. According to the inclusion criteria, the clinical data of 33 patients were analyzed, including 18 males and 15 females, with a median age of 41.0 years (range, 18-60 years). There were 16 cases on left side and 17 cases on the right side. Three-dimensional (3D) calcaneal model was reconstructed by Mimics 17.0 software, and the ST anatomical references were measured, including the length of upper and lower edge, the length and height of the midline, the horizontal angle between the midline and foot plantar surface. The parameters of the optimal entry point position (P’ point) and placement angle of the ST screw were determined. The length of ST screw was also measured. The differences between males and females or left and right sides were compared.ResultsThe length of upper edge of the ST was (16.60±2.23) mm, lower edge (20.65±2.90) mm, midline (20.56±2.62) mm, and the height of midline was (9.61±1.36) mm. The horizontal angle between the midline and foot plantar surface was (23.43±3.36)°. The vertical distance from P’ point to the lowest point of the tarsal sinus was (3.09±1.65) mm, while the horizontal distance was (14.29±2.75) mm. The distance from P’ point to the apex of the lateral talus, subchondral bone of subtalar joint, calcaneocuboid joint was (11.41±3.22), (6.59±2.22), (34.58±3.75) mm, respectively. The horizontal angle between the ST screw and foot plantar surface was (–1.17±2.07)°. The anteversion angle of ST screw was (16.18±2.05)° and the length was (41.64 ± 3.09) mm. There were significant differences in the length of upper and lower edge, the length and height of the midline, the distance from P’ point to the apex of the lateral talus, subchondral bone of subtalar joint, and calcaneocuboid joint, and the anteversion angle and length of the ST screw between males and females (P<0.05). There was no significant difference in above all parameters between left and right sides (P>0.05).ConclusionAfter appropriate reduction of the calcaneal fractures, the entry point of ST screw was recommended at about 14 mm posterior and about 3 mm upper related to the foot horizontal line through the lowest tarsal sinus point; and the direction of ST screw placement was about 17° anteversion for males and 15° anteversion for females.
ObjectiveTo investigate the safety and effectiveness of anatomical approach osteoligaments repair technique in treatment of pronation ankle fractures.MethodsThe clinical data of 53 patients with pronation ankle fractures between April 2015 and October 2016, who were treated with anatomical approach osteoligaments repair technique applied for fracture reduction and internal fixation, were analysed retrospectively. There were 35 males and 18 females with an average age of 33.1 years (range, 18-60 years). The cause of injury included traffic accidents in 27 cases, tumbling in 5 cases, fall from height in 4 cases, twisted injury in 6 cases, sports injuries in 4 cases, and bruises in 7 cases. According to Lauge-Hansen classification, there were 44 cases of pronation external rotation stage Ⅳ and 9 cases of pronation abduction stage Ⅲ. The interval between injury and operation was 4-10 days (mean, 7 days). Postoperative pain and function of ankles were assessed by American Orthopedic Foot and Ankle Score (AOFAS) and visual analogue pain scale (VAS) score. The medial clear space (MCS), tibiofibular clear space (TFCS), distal fibular tip to lateral process of talus (DFTL), the anterior and posterior tibiofibular syndesmosis distance, and the lateral malleolus twist angle were measured by X-ray films and CT of bilateral ankle joints.ResultsThe tourniquet application time was 55-90 minutes (mean, 72.5 minutes); the frequency of fluoroscopy was 5-13 times (mean, 8.9 times). All incisions healed by first intention and no infection, deep vein thrombosis occurred after operation. All patients were followed up 28-48 months (mean, 36 months). There was no significant difference in postoperative MCS, TFCS, DFTL, the anterior and posterior tibiofibular syndesmosis distance, and the lateral malleolus twist angle between bilateral ankle joints (P>0.05). At last follow-up, no ankle instability occurred and the degenerative changes of ankle joints (Kellgren-Lawrence grading Ⅱ) occurred in 5 cases. The average AOFAS score of the ankle joint was 90.84 (range, 85-95); mean VAS score was 1.23 (range, 0-5). The average dorsiflexion and plantar flexion of ankle joints was 20.24° (range, 15-25°) and 42.56° (range, 30-50°), respectively.ConclusionAnatomical approach osteoligaments repair technique in treatment of pronation ankle fractures can expose the talocrural joint and lower tibiofibular syndesmosis clearly, repair the osteoligaments injury directly, and assist the syndesmosis and talocrural joint reduction, and decline the incidence of ankle degeneration.