ObjectiveTo assess the feasibility of 3D digital lung software used in preoperative planning of patients with multiple pulmonary nodules and poor pulmonary function. MethodsFive patients with multiple pulmonary nodules in the left lung, meanwhile with a history of single lung lobectomy in the right lung were included in our hospital between June and December 2015. There were 4 males and 1 female at an average age of 50.4±2.6 years. A 320-slice volumetric CT scanner was used to the CT angiography (CTA) of the pulmonary artery. The data of CT images were imported into the 3D digital lung software that was researched and developed by Xiamen QiangBen Science and Technology Company. The 3D reconstruction of digital virtual lung was completed by this software based on those data. At the same time the soft-ware completed the automatic segmentation of the lung based on the pulmonary artery system and the 3D reconstruction of the pulmonary nodules. The 3D digital lung software calculated the volume proportion of the intended removal (segm-ental lesions) to the whole lung, estimated the effect of surgery on forced expired volume in one second (FEV1), and the patient's tolerance ability to surgery. After the preoperative planning, the patients received multiple pulmonary segmental/subsegmental resection under the general anesthesia by video-assisted thoracoscopic surgery (VATS). ResultsThe 3d reconstruction of the pulmonary arteries reached 5 levels in 5 patients. And the software automatically identified out the lung segment/subsegment to show the lung nodules of lung segment/subsegment. The preselection lung volume of 5 patients accounted for 14.00%-27.00% of total lung volume. The software estimated FEV1 as 1.16-1.46 L which can tolerate the operation. The 5 patients were successfully performed surgery of multiple pulmonary segmental/subsegmental resection under the general anesthesia by VATS. The software located lung nodules from the resection of pulmonary segments during operation immediately. Then we sent them to the rapid pathological examination for diagnosis. After operation, the patients recovered well, and had no respiratory insufficiency. Hospitalization day was 4 days. ConclusionThe 3D digital pulmonary software can not only automatically identify the pulmonary segments, precisely position the pulmonary nodule, show the relationship among the target pulmonary segments artery, vein, bronchus and the surroun-ding artery, vein, and bronchus, but also calculate the volume of the pulmonary segments, estimate the impact of the pulmonary segmentectomy on the FEV1. It is useful for precise evaluation of the tolerant capacity of multiple pulmonary nodules in patients with unstaged multiple pulmonary segments.
Objective To evaluate effects of three-dimensional (3D) visualized reconstruction technology on short-term benefits of different extent of resection in treating hepatic alveolar echinococcosis (HAE) as well as some disadvantages. Methods One hundred and fifty-two patients with HAE from January 2014 to December 2016 in the Department Liver Surgery, West China Hospital of Sichuan University were collected, there were 80 patients with ≥4 segments and 72 patients with ≤3 segments of liver resection among these patients, which were designed to 3D reconstruction group and non-3D reconstruction group according to the preference of patients. The imaging data, intraoperative and postoperative indicators were recorded and compared. Results The 3D visualized reconstructions were performed in the 79 patients with HAE, the average time of 3D visualized reconstruction was 19 min, of which 13 cases took more than 30 min and the longest reached 150 min. The preoperative predicted liver resection volume of the 79 patients underwent the 3D visualized reconstruction was (583.6±374.7) mL, the volume of intraoperative actual liver resection was (573.8±406.3) mL, the comparison of preoperative and intraoperative data indicated that both agreed reasonably well (P=0.640). Forty-one cases and 38 cases in the 80 patients with ≥4 segments and 72 patients with ≤3 segments of liverresection respectively were selected for the 3D visualized reconstruction. For the patients with ≥4 segments of liver resection, the operative time was shorter (P=0.021) and the blood loss was less (P=0.047) in the 3D reconstruction group as compared with the non-3D reconstruction group, the status of intraoperative blood transfusion had no significant difference between the 3D reconstruction group and the non-3D reconstruction group (P=0.766). For the patients with ≤3 segments of liver resection, the operative time, the blood loss, and the status of intraoperative blood transfusion had no significant differences between the 3D reconstruction group and the non-3D reconstruction group (P>0.05). For the patients with ≥4 segments or ≤3 segments of liver resection, the laboratory examination results within postoperative 3 d, complications within postoperative 90 d, and the postoperative hospitalization time had no significant differences between the 3D reconstruction group and the non-3D reconstruction group (P>0.05). Conclusion 3D visualized reconstruction technology contributes to patients with HAE ≥4 segments of liver resection, it could reduce intraoperative blood loss and shorten operation time, but it displays no remarkable benefits for ≤3 segments of liver resection.
ObjectiveTo research the value of virtual reality (VR) technology in the preoperative planning of transtrochanteric curved varus osteotomy for avascular necrosis of the femoral head (ANFH) in adults.MethodsBetween June 2018 and November 2018, 7 patients (11 hips) with ANFH, who were treated with transtrochanteric curved varus osteotomy, were enrolled in the study. There were 4 males (7 hips) and 3 females (4 hips) with an average age of 31.9 years (range, 14-46 years). Among them, 3 patients were unilateral ANFH and 4 patients were bilateral ANFH. There was 1 patient (1 hip) of traumatic ANFH, 2 patients (4 hips) of alcohol-induced ANFH, 2 patients (3 hips) of hormonal ANFH, and 2 patients (3 hips) of idiopathic ANFH. All hips were Association Research Circulation Osseous (ARCO) stage Ⅲ. There were 5 hips for Japanese Investigation Committee (JIC) type C1 and 6 hips for type C2. There were 5 hips for China-Japan Friendship Hospital (CJFH) type L1,1 for type L2, and 5 for type L3. The disease duration ranged from 5 to 12 months (mean, 8 months). Preoperative Harris score was 53.91±7.66. The neck-shaft angle ranged from 128 to 143° (mean, 133.9°). VR technology was adopted for the preoperative planning. CT data were imported into the software to construct the morphology of necrotic area, and the transrtrochanteric varus osteotomy was simulated. The varus angle was designed according to the integrity rate of femoral head. The planned varus angle was 6 to 16° (mean, 9.7°). The transtrochanteric curved varus osteotomy was performed according to the preoperative planning, and the varus angle and loading area were confirmed under fluoroscopy. If the planned varus angle was too small, it would continue to increase under the fluoroscopy until a satisfactory varus angle. Postoperative changes of the neck-shaft angle were calculated and compared with the preoperative planned varus angle (error). The hip function was assessed by using the Harris score.ResultsAll incisions healed by first intention. All patients were followed up 6-11 months with an average of 8 months. The X-ray film at 2 days after operation showed that the neck-shaft angle was 112-135° (mean, 123.4°). The difference of the neck-shaft angle between pre- and post-operation was 6-16° (mean, 11.0°). Among them, the difference of the neck-shaft angle was consistent with planned varus angle in 5 hips, while the error of the remaining 6 hips was 1-4°. There was 1 patient (1 hip) of osteotomy nonunion at 4 months after operation, 1 patient (1 hip) of proximal femur fracture at 2 months after operation. The rest 5 patients (9 hips) obtained union at the osteotomy. At last follow-up, the Harris score was 82.18±16.35, showing significant difference when compared with preoperative score (t=–5.195, P=0.000).ConclusionVR technology is a brand-new preoperative planning method for transtrochanteric curved varus osteotomy in treating ANFH.
ObjectiveTo develop an artificial intelligence based three-dimensional (3D) preoperative planning system (AIHIP) for total hip arthroplasty (THA) and verify its accuracy by preliminary clinical application.MethodsThe CT image database consisting of manually segmented CT image series was built up to train the independently developed deep learning neural network. The deep learning neural network and preoperative planning module were assembled within a visual interactive interface—AIHIP. After that, 60 patients (60 hips) with unilateral primary THA between March 2017 and May 2020 were enrolled and divided into two groups. The AIHIP system was applied in the trial group (n=30) and the traditional acetate templating was applied in the control group (n=30). There was no significant difference in age, gender, operative side, and Association Research Circulation Osseous (ARCO) grading between the two groups (P>0.05). The coincidence rate, preoperative and postoperative leg length discrepancy, the difference of bilateral femoral offsets, the difference of bilateral combined offsets of two groups were compared to evaluate the accuracy and efficiency of the AIHIP system.ResultsThe preoperative plan by the AIHIP system was completely realized in 27 patients (90.0%) of the trial group and the acetate templating was completely realized in 17 patients (56.7%) of the control group for the cup, showing significant difference (P<0.05). The preoperative plan by the AIHIP system was completely realized in 25 patients (83.3%) of the trial group and the acetate templating was completely realized in 16 patients (53.3%) of the control group for the stem, showing significant difference (P<0.05). There was no significant difference in the difference of bilateral femoral offsets, the difference of bilateral combined offsets, and the leg length discrepancy between the two groups before operation (P>0.05). The difference of bilateral combined offsets at immediate after operation was significantly less in the trial group than in the control group (t=−2.070, P=0.044); but there was no significant difference in the difference of bilateral femoral offsets and the leg length discrepancy between the two groups (P>0.05).ConclusionCompared with the traditional 2D preoperative plan, the 3D preoperative plan by the AIHIP system is more accurate and detailed, especially in demonstrating the actual anatomical structures. In this study, the working flow of this artificial intelligent preoperative system was illustrated for the first time and preliminarily applied in THA. However, its potential clinical value needs to be discovered by advanced research.
ObjectiveTo investigate the early effectiveness of artificial intelligence (AI) assisted total hip arthroplasty (THA) system (AIHIP) in the treatment of patients with Crowe type Ⅳ developmental dysplasia of the hip (DDH).MethodsThe clinical data of 23 patients with Crowe type Ⅳ DDH who met the selection criteria between May 2019 and December 2020 were retrospectively analyzed. There were 3 males and 20 females, the age ranged from 44 to 74 years, with an average of 52.65 years. The absolute value of the lower limbs discrepancy before operation was (15.17±22.17) mm. The preoperative Harris score was 62.4±7.2. The AIHIP system was used for preoperative planning, and the operations were all performed via conventional posterolateral approach. Thirteen patients with difficulty in reduction during operation underwent subtrochanteric shortening osteotomy (SSOT). The operation time, hospital stay, and adverse events were recorded; Harris score was used to evaluate the function of the affected limb at 1 day before operation and 1 week and 6 months after operation; pelvic anteroposterior X-ray film was taken at 1 day after operation to evaluate the position of the prosthesis. The matching degree of prosthesis was evaluated according to the consistency of intraoperative prosthesis model and preoperative planning.ResultsThe matching degree of acetabular cup model after operation was 16 cases of perfect matching, 4 cases of general matching (1 case of +1, 3 cases of –1), and 3 cases of mismatch (all of them were +2), the coincidence rate was 86.96%. The matching degree of femoral stem model was perfect matching in 22 cases and general matching in 1 case of –1, and the coincidence rate was 100%. One patient had a periprosthesis fracture during operation, and was fixed with a wire cable during operation, and walked with the assistance of walking aid at 6 weeks after operation; the rest of the patients walked with the assistance of walking aid at 1 day after operation. The operation time was 185-315 minutes, with an average of 239.43 minutes; the hospital stay was 8-20 days, with an average of 9.96 days; and the time of disengagement from the walking aid was 2-56 days, with an average of 5.09 days. All patients were followed up 6 months. All incisions healed by first intension, and there was no complication such as infection, dislocation, refracture, and lower extremity deep venous thrombosis; X-ray films at 1 day and 6 months after operation showed that the acetabular and femoral prostheses were firmly fixed and within the safe zone; the absolute value of lower limbs discrepancy at 1 day after operation was (11.96±13.48) mm, which was not significantly decreased compared with that before operation (t=0.582, P=0.564). All osteotomies healed at 6 months after operation. The Harris scores at 1 week and 6 months after operation were 69.5±4.9 and 79.2±5.7 respectively, showing significant differences between pre- and post-operation (P<0.05). At 6 months after operation, the hip function was evaluated according to Harris score, and 13 cases were good, 9 cases were fair, and 1 case was poor.ConclusionAIHIP system-assisted THA (difficult to reposition patients combined with SSOT) for adult Crowe type Ⅳ DDH has high preoperative planning accuracy, easy intraoperative reduction, early postoperative landing, and satisfactory short-term effectiveness.
Objective By comparing with the traditional X-ray template measurement method, to explore the accuracy of artificial intelligence preoperative planning system (AI-HIP) to predict the type of prosthesis and guide the placement of prosthesis before total hip arthroplasty (THA) in adult patients with developmental dysplasia of the hip (DDH). Methods Patients with DDH scheduled for initial THA between August 2020 and August 2022 were enrolled as study object, of which 28 cases (28 hips) met the selection criteria were enrolled in the study. Among them, there were 10 males and 18 females, aged from 34 to 77 years, with an average of 59.3 years. There were 12 cases of the left DDH and 16 cases of the right DDH. According to DDH classification, there were 10 cases of Crowe type Ⅰ, 8 cases of type Ⅱ, 5 cases of type Ⅲ, and 5 cases of type Ⅳ. According to Association Research Circulation Osseous (ARCO) staging of osteonecrosis of the femoral head, 13 cases were in stage Ⅲ and 15 cases in stage Ⅳ. The disease duration was 2.5-23.0 years (mean, 8.6 years). The limb length discrepancy (LLD) was 11.0 (8.0, 17.5) mm. Before operation, the prosthesis types of all patients were predicted by AI-HIP system and X-ray template measurement method, respectively. And the preoperative results were compared with the actual prosthesis type during operation in order to estimate the accuracy of the AI-HIP system. Then, the differences in the acetabular abduction angle, acetabular anteversion angle, femoral neck osteotomy position, tip-shoulder distance, and LLD were compared between preoperative planned measurements by AI-HIP system and actual measurement results after operation, in order to investigate the ability of AI-HIP system to evaluate the placement position of prosthesis. Results The types of acetabular and femoral prostheses predicted based on AI-HIP system before operation were consistent with the actual prostheses in 23 cases (82.1%) and 24 cases (85.7%), respectively. The types of acetabular and femoral prostheses predicted based on X-ray template measurement before operation were consistent with the actual prostheses in 16 cases (57.1%) and 17 cases (60.7%), respectively. There were significant differences between AI-HIP system and X-ray template measurement (P<0.05). There was no significant difference in acetabular abduction angle, acetabular anteversion angle, femoral neck osteotomy position, and tip-shoulder distance between AI-HIP system and actual measurement after operation (P>0.05). LLD after operation was significantly lower than that before operation (P<0.05). There was no significant difference between the LLD predicted based on AI-HIP system and the actual measurement after operation (P>0.05). Conclusion Compared with the traditional X-ray template measurement method, the preoperative planning of AI-HIP system has better accuracy and repeatability in predicting the prosthesis type. It has a certain reference for the prosthesis placement of adult DDH.
ObjectiveTo investigate the surgical technique and the short-term effectivenss of lateral unicompartmental knee arthroplasty (LUKA) through lateral approach in the treatment of valgus knee and to calculate the maximum value of the theoretical correction of knee valgus deformity. MethodsA retrospective analysis was performed on 16 patients (20 knees) who underwent LUKA and met the selection criteria between April 2021 and July 2022. There were 2 males and 14 females, aged 57-85 years (mean, 71.5 years). The disease duration ranged from 1 to 18 years, with an average of 11.9 years. Knee valgus was staged according to Ranawat classification, there were 6 knees of type Ⅰ, 13 knees of type Ⅱ, and 1 knee of type Ⅲ. All patients were assigned the expected correction value of genu valgus deformity by preoperative planning, including the correction value of lateral approach, intra-articular correction value, and residual knee valgus deformity value. The actual postoperative corrected values of the above indicators were recorded and the theoretical maximum correctable knee valgus deformity values were extrapolated. The operation time, intraoperative blood loss, incision length, hospital stay, hip-knee-ankle angle (HKA), mechanical lateral distal femoral angle (mLDFA), mechanical medial proximal tibia angle (mMPTA), joint line convergence angle (JLCA), posterior tibial slope (PTS), range of motion (ROM), Hospital for Special Surgery (HSS) score, and Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC) score were also recorded for effectiveness evaluation. Results The patients’ incision length averaged 13.83 cm, operation time averaged 85.8 minutes, intraoperative blood loss averaged 74.9 mL, and hospital stay averaged 6.7 days. None of the patients suffered any significant intraoperative neurological or vascular injuries. All patients were followed up 10-27 months, with a mean of 17.9 months. One patient with bilateral knee valgus deformities had intra-articular infection in the left knee at 1 month after operation and the remaining patients had no complication such as prosthesis loosening, dislocation, and infection. The ROM, HSS score, and WOMAC score of knee joint significantly improved at each time point after operation when compared to those before operation, and the indicators further improved with time after operation, the differences were all significant (P<0.05). Imaging measurement showed that HKA, mLDFA, JLCA, and PTS significantly improved at 3 days after operation (P<0.05) except for mMPTA (P>0.05). Postoperative evaluation of the knee valgus deformity correction values showed that the actual intra-articular correction values ranged from 0.54° to 10.97°, with a mean of 3.84°. The postoperative residual knee valgus deformity values ranged from 0.42° to 5.30°, with a mean of 3.59°. The actual correction values of lateral approach ranged from 0.21° to 12.73°, with a mean of 4.26°. ConclusionLUKA through lateral approach for knee valgus deformity can achieve good early effectiveness. Preoperative planning can help surgeons rationally allocate the correction value of knee valgus deformity, provide corresponding treatment strategies, and the maximum theoretical correction value of knee valgus deformity can reach 25°.
Objective To explore the short-term effectiveness of hip revision surgery guided by artificial intelligence preoperative planning (AIHIP) system. Methods The clinical data of 22 patients (23 hips) who were admitted between June 2019 and March 2023 and met the selection criteria were retrospectively analyzed. There were 12 males and 10 females with an average age of 69.7 years (range, 44-90 years). There were 19 hips in the first revision, 3 hips in the second revision, and 1 hip in the third revision. The causes of revision included 12 hips with prosthesis loosening, 4 hips with acetabular cup loosening, 3 hips with osteolysis, 2 hips with acetabular dislocation, 1 hip with postoperative infection, and 1 hip with prosthesis wear. There were 6 hips in stage ⅡA, 9 hips in stage ⅡB, 4 hips in stage ⅡC, 3 hips in stage ⅢA, and 1 hip in stage ⅢB according to Paprosky staging of acetabular bone defect. The replacement of prosthesis type, operation time, hospitalization stay, ground active condition, and postoperative infection, fracture, prosthesis loosening, and other adverse events were recorded. The function of the affected limb was evaluated by Harris score before operation, at 1 week and 6 months after operation, and the range of motion of the hip joint was compared before operation and at 6 months after operation. Results The operation time was 85-510 minutes, with an average of 241.8 minutes; the hospitalization stay was 7-35 days, with an average of 15.2 days; the time of disassociation from the walker was 2-108 days, with an average of 42.2 days. All the 22 patients were followed up 8-53 months (mean, 21.7 months). No adverse events such as prosthesis loosening or infection occurred in the rest of the patients, except for postoperative hematoma of the thigh in 1 patient and dislocation of the hip in 1 hip. The matching degree of acetabular cup was completely matched in 22 hips and mismatched in 1 hip (+2), the matching rate was 95.65%. The matching degree of femoral stem was completely matched in 22 hips and generally matched in 1 hip (−1), and the matching rate was 100%. The Harris scores were 55.3±9.8 and 89.6±7.2 at 1 week and 6 months after operation, respectively, which significantly improved when compared with before operation (33.0±8.6, P<0.05), and further improved at 6 months after operation than at 1 week after operation (P<0.05). The function of hip joint was evaluated by Harris score at 6 months after operation, and 21 hips were good and 2 hips were moderate, which could meet the needs of daily life. The range of motion of hip joint was (111.09±10.11)° at 6 months after operation, which was significantly different from (79.13±18.50)° before operation (t=−7.269, P<0.001). Conclusion AIHIP system can improve the accuracy of revision surgery, reduce the difficulty of surgery, and achieve good postoperative recovery and satisfactory short-term effectiveness.
Objective To analyze the accuracy of prosthesis size selection in Naton robot-assisted medial unicondyle knee arthroplasty by comparing the actual prosthesis size used during operation and the preoperative planning. Methods The clinical data of 100 patients (110 knees) who underwent Naton robot-assisted medial unicondylar knee arthroplasty between June 2023 and July 2024 was retrospectively analyzed, including 47 knees on left side and 63 knees on right side. There were 37 males (40 knees) and 63 females (70 knees) with a mean age of 65.4 years (range, 59-71 years). Body mass index was 22.2-28.6 kg/m2 (mean, 25.4 kg/m2). The disease duration ranged from 1 to 8 years (mean, 3.4 years). Preoperative planning was performed by Naton robotic surgical system based on lower limb CT data. The final prosthesis size after osteotomy was recorded and compared with the preoperative plan to analyse whether it was consistent with the preoperative plan, as well as the situation of knee flexion and extension gaps (<0.5 mm, >2.0 mm) corresponding to the different models of prostheses. ResultsDuring operation, 5 patients (5 knees) were treated with traditional UKA due to mechanical arm failure, software obstacles, significant bone amputation bias, or loose reference frame, and were excluded from the final analysis. The remaining 95 patients (105 knees) successfully received Naton robot-assisted surgery, and no related complications occurred. The prosthesis size was consistent with the preoperative plan in 101 knees (96.2%) on the femur side, 100 knees (95.2%) on the tibia side, and 97 knees (92.4%) on both femur and tibia sides. The prosthesis size was inconsistent in 3 cases (2.86%) on the femur side alone, 4 cases (3.81%) on the tibial side alone, and 1 case (0.95%) on both femur and tibial sides. Among the prostheses with different models, the flexion and extension gaps were less than 0.5 mm in 3 knees, the flexion gap was less than 0.5 mm and the extension gap was more than 2.0 mm in 3 knees, and the flexion gap was more than 2.0 mm and the extension gap was less than 0.5 mm in 2 knees. Conclusion The accuracy of prosthesis size selection for Naton robot-assisted medial unicondylar knee arthroplasty is relatively high.