Objective To explore and evaluate the accuracy and feasibil ity of individual rapid prototype (RP) drill templates for atlantoaxial pedicle screw implantation. Methods Volumetric CT scanning was performed in 8 adult cadaveric atlas and axis to collect Dicom format datas. Then three-dimensional (3D) images of atlas and axis were reconstructed and the parameters of pedicles of 3D model were measured by using software Mimics 10.01. The 3D model was saved by STLformat in Mimics. The scattered point cloud data of 3D model were processed and the 3D coordinate system was located in software Imageware 12.1. The curves and surfaces of 3D model were processed in software Geomagic Studio 10. The optimal trajectory of pedicle screw was designed and a template was constructed which accorded with the anatomical morphology of posterior arch of atlas and lamina of axis by using software Pro/Engineer 4.0. The optimal trajectory of pedicle screw and the template were integrated into a drill template finally. The drill template and physical models of atlas and axis were manufactured by RP (3D print technology). The accuracy of pilot holes of drill templates was assessed by visually inspecting and CT scanning. Results The individual drill template was used conveniently and each template could closely fit the anatomical morphology of posterior arch of atlas and lamina of axis. Template loosening and shifting were not found in the process of screw implantation. Thirty-two pedicle screws were inserted. Imaging and visual inspection revealed that the majority of trajectories did not penetrate the pedicle cortex, only 1 cortical penetration was judged as noncritical and did not injury the adjacent spinal cord, nerve roots, and vertebral arteries. The accuracy of atlas pedicle screw was grade 0 in 15 screws and grade I in 1 screw, and the accuracy of axis pedicle screw was grade 0 in 16 screws. Conclusion The potential of individual drill templates to aid implantation of atlantoaxial pedicle screw is promising because of its high accuracy.
【Abstract】 Objective To determine the three-dimensional stabil ity of atlantoaxial reconstruction withanterior approach screw fixation through C2 vertebral body to C1 lateral mass and Gall ie’s technique (ASMG) for C1,2instabil ity. Methods Twenty-five human cadaveric specimens (C0-3 ) were divided randomly into 5 groups (n=5). Thethree-dimensional ranges of motion C1 relative to C2 were measured under the five different conditions：the intact state group (group A), type II odontoid fracture group (group B), posterior C1,2 transarticular screw fixation group (group C), ASM group (group D) and ASMG group (group E). The three-dimensional ranges of motions C1 relative to C2 by loading ± 1.5 Nm were measured under the six conditions of flexion/extension, left/right lateral bending, and left/right axial rotation. The obtained data was statistically analyzed. Results In each group, the three-dimensional ranges of motion C1 relative to C2 under the six conditions of flexion/extension, left/right lateral bending, and left/right axial rotation were as follows: in group A (8.10 ± 1.08), (8.49 ± 0.82), (4.79 ± 0.47), (4.93 ± 0.34), (28.20 ± 0.64), (29.30 ± 0.84)°; in group B (13.60 ± 1.25), (13.80 ± 0.77), (9.64 ± 0.53), (9.23 ± 0.41), (34.90 ± 0.93), (34.90 ± 1.30)°; in group C (1.62 ± 0.10), (1.90 ± 0.34), (1.25 ± 0.13), (1.37 ± 0.28), (0.97 ± 0.14), (1.01 ± 0.17)°; in group D (2.03 ± 0.26), (2.34 ± 0.49), (1.54 ± 0.22), (1.53 ± 0.30), (0.80 ± 0.35), (0.76 ± 0.30)°; in group E (0.35 ± 0.12), (0.56 ± 0.34), (0.44 ± 0.15), (0.55 ± 0.16), (0.43 ± 0.07), (0.29 ± 0.06)°. Under the six conditions, there were generally significant differences between group A and other four groups, and between group B and groups C, D and E (P lt; 0.001), and between group E and groups C, D in flexion/ extension and left/right lateral bending (P lt; 0.05). There was no significant difference between group E and groups C, D in left/right axial rotation (P gt; 0.05). Conclusion In vivo biomechanical studies show that ASMG operation has unique superiority in the reconstruction of the atlantoaxial stabil ity, especially in controll ing stabil ity of flexion/extension and left/right lateral bending, and thus it ensures successful fusion of the implanted bone. It is arel iable surgical choice for the treatment of the obsolete instabil ity or dislocation of C1, 2 joint.
Objective To study the prevention and management of early compl ications associated with anterior cervical spinal surgery. Methods From November 1998 to December 2006, 363 cases were treated with anterior cervicalsurgery, including 268 males and 95 females aged 17-79 years．In these cases, 224 suffered from cervical spondylosis, 39 from cervical disc herniation, 87 from cervical trauma, 9 from cervical tumor and 4 from cervical tuberculosis. Forty-eight cases with anterior cervical surgery were fused by autogenous il iac bones, 132 cases with anterior cervical surgery were fused by autogenous il iac bones and anterior cervical spine locking plates, and 183 cases with anterior cervical surgery were fused by titanium mesh cage and anterior cervical spine locking plates. Results A total of 282 cases were followed up for 3 months to 5 years with the average of 1 year and 11 months. Twenty-three compl ications associated with surgery were found, with an incidence of 8.16%. Three cases of transient superior laryngeal nerve palsy recovered within 3-7 days after the restriction of l iquid diet and fluid replacement. Two cases of recurrent laryngeal nerve palsy recovered by 3-month pronunciation practice. One case of spinal cord injury was treated with medicine for dehydration and anti-inflammation, and was restored to preoperative muscle power of inferior extremity after 6 months. Two cases of CSF leakage were cured with moderate local compression and meticulous water-tight wound closure. Among the 10 patients with compl ications of internal fixation, one suffering mild dysphagia was reoperated, while the others were treated with cephal-cervico-thorax plaster external fixation and recovered with sol id fusion within 3-18 months. Among the 4 cases with cervical hematoma, 1 died of wrong rescue procedures and 1 was infected. Conclusion Adequate preoperative preparation, thorough understanding of anatomy related to the anterior approach and skilled surgical technique are essential for preventing the early postoperative compl ications of anterior cervical spinal surgery．
Objective To explore the anatomic basis for theanterior approach screw fixation through the C2 vertebral body into the C1 lateral mass and toinvestigate its primary clinical application. Methods Twenty-one adult corpse specimens were anatomically measured. The minimum lateral angle α, the maximum lateral angle β, and the maximum posterior angle γ were calculated based on the data from the anatomic measurement. All the specimens were given an X-ray examination, the minimum lateral angle α, the maximum lateral angle β, and the maximum posterior angle γ were measured. The statistical analysis was made on the data obtained from the calculation in the specimens and the measurement in the X-ray films. The simulation of the approach was made onthe specimen. From October 2004 to July 2006, the simulated approach was used in 5 patients (3 males, 2 females; age, 30-55 years; illness course, 3 months-2 years) with the old atlanto-axial joint dislocation . The Frankel grading system revealed the spinal cord injury degree as follows: 1 patientwas in Grade B, 2 in Grade C, and 2 in Grade D. All the patients were treated with this surgical approach. The postoperative X-ray and CT examinations were performed. Results Angle α was 14.0±1.6°, β was 30.0±2.3°, γ was 29.0±2.9°. No significant difference existed between the angles calculated in the specimens and measured in the X-ray films (Pgt;0.05). The angles for the practical application during operation were as follows: α was 11.2±1.6°, β was 28.8±2.3°, and γ was 29.3±2.9°. The follow-up for an average of 14 months revealed that 1 patient recovered to Grade C, 1 to Grade D2, and 3 to Grade D3 in the spinal cord function according the modified Frankel grading system.Conclusion The anterior approach screw fixation through the C2 vertebral body into the C1 lateral massis feasible and safe in treatment of the old atlantoaxial joint dislocation ifthe screw insertion is exact in direction. This technique only makes the atlas temporarily stable, and so the posterior bone graft should be added into the atlantoaxial joint immediately in the one- or two-stage operation so as to achieve a long-lasting stability.
Objective To study the development, investigation, and application of the artificial vertebral body so as to provide an essential reference for the future research and clinical application. Methods The recent articles on materials, types, and clinical applications of the artificial vertebral body were reviewed.Results The materials used for the artificial vertebral body were porcelain, alloy, variant bone, and composite. But each of them had its own advantages and disadvantages. The types of the artificial vertebral body were grouped as expandable and non-expandable ones; however, the expandable type was much better. The artificial vertebral body had been applied to the treatments of spinal tumor, tuberculosis, fracture, and infection, with better effects. Conclusion The artificial vertebral body can beextensively applied. However, the materials and types need to be improved.
On the basis of the experimental study, 48 cases of finger injuries were treated with 2% silver sulphadiazine. The largest surface area of the wound was 5cm×2.5cm and the smallest being 0.3cm×0.3cm. The patients were follwed up for an average of 5.6 months. All of the wounds were completely healed under treatment without infection or necrosis. The wounds healed with a minimum of 7 days and amaximum of 25 days, with an average of 14.25 days. Experimental study and the clinical materials demonstrated the same results that silver sulphadiazine would reduce infection and inflammatory reaction, minimizing scar formation, and enhancement of granulation formation and epithelization. This method of treatment had theadvantages of being simple, low cost and early return to work.
ObjectiveTo investigate the effect of Notch signaling pathway important target Hey1 expression on the differentiation and proliferation of C3H10T1/2 cells induced by bone morphogenetic protein 9 (BMP-9). MethodsHey1 lentivirus and Hey1 short hairpin RNA lentivirus were constructed and used to infect C3H10T1/2 cells to change the expression level of Hey1 in C3H10T1/2 cells. C3H10T1/2 cells infected with LV-Blank (empty plasmid) as control. The Hey1 expression levels of different groups were detected by fluorescence microscope, real-time fluorescence quantitative PCR, and Western blot. The C3H10T1/2 cells with different Hey1 expression level were induced by BMP-9 conditioned medium (BMP-9+C3H10T1/2 group, BMP-9+C3H10T1/2-Hey1 group, and BMP-9+C3H10T1/2-shHey1 group); the cells of control groups (C3H10T1/2 group and C3H10T1/2-Blank group) were cultured with normal medium. The mRNA and protein expression levels of osteogenesis related transcription factors (Runx2, osteopontin, and osteocalcin) were detected at 48 hours by real-time fluorescence quantitative PCR and Western blot assay. The cells proliferation and cycles were detected by MTT assay at 4, 5, 6, and 7 days and flow cytometry at 4, 5, and 10 days. The alkaline phosphatase (ALP) activity was analyzed by ELISA and observed by ALP staining at 4 and 7 days. ResultsC3H10T1/2 cell lines with different Hey1 expression levels were successfully established. In osteogenesis compared with BMP-9+C3H10T1/2 group, overexpression of Hey1 enhanced the mRNA and protein expressions of transcription factors (Runx2, osteopontin, and osteocalcin), and the expression of osteogenic differentiation marker (ALP) (P < 0.05); however, inhibition of Hey1 expression significantly decreased the above indexes (P < 0.05). In cell proliferation activity compared with BMP-9+C3H10T1/2 group, overexpression of Hey1 increased absorbance (A) value in MTT assay and pecentage of G2+S cells in cytometry assay, but inhibition of Hey1 expression significantly decreased the indexes (P < 0.05). ConclusionExpression of Hey1 is the important link in the osteogenic differentiation process of C3H10T1/2 cells induced by BMP-9, and plays an important role in the regulation of early cell proliferation.
Objective To review the progress of surgical treatment for the thoracolumbar spinal tuberculosis. Methods The related literature of surgical treatment for the thoracolumbar spinal tuberculosis was reviewed and analyzed from the aspects such as surgical approach, fixed segments, fusion ranges, bone graft, and bone graft material research progress. Results Most scholars prefer anterior or combined posterior approach for surgical treatment of thoracic and lumbar tuberculosis because it possessed advantage of precise effectiveness. In recent years, a simple posterior surgery achieved satisfactory effectiveness. The fixation segments are mainly composed of short segments or intervertebral fixation. The interbody fusion is better for the bone graft fusion range and manner, and the bone graft materials is most satisfied with autologous iliac Cage or titanium Cage filled with autologous cancellous bone. Conclusion The perfect strategy for treating the thoracolumbar spinal tuberculosis has not yet been developed, and the personalized therapy for different patients warrants further study.
Objective To study the clinical effects of the artificial vertebral body of the biomimetic nanohydroxyapatite/polyamide 66 (nHA/PA66) compositefor the structural reconstruction and the height restoring of the vertebral body in the thoracolumbar fractures by the anterior surgical procedures. Methods From December 2003 to January 2006, 42 patients with thoracolumbar fractures received the anterior surgical procedures to decompress and reconstruct the spinal vertebral structure with the artificial vertebral body of the nHA/PA66 composite. Among the patients, there were 28 males and 14 females, aged 1767 years, averaged 43.6 years. The thoracolumbar fractures developed at T12 in 5 patients, at L1 in 17, at L2 in 14, and at L3 in 6. The height of the anterior border of thevertebral body amounted to 29%-47% of the vertebral body height, averaged 40.6%.The Cobb angle on the sagittal plane was 2138° averaged 27.6°. According tothe Frankel grading scale, the injuries to the nerves were as the following: Grade A in 7 patients, Grade B in 19, Grade C in 8, Grade D in 6, and Grade E in 2. Results All the 42 patients were followed up for 625 months. Among the patients, 36 were reconstructed almost based on the normal anatomic structure, and 6 were well reconstructed. The mean height of the anterior border of the vertebralbody was 40.6% of the vertebral body height before operation but 91.7% after operation. And the reconstructed height of the vertebra was maintained. The mean Cobb angle on the sagittal plane was 27.6°before operation but 13.4° after operation. All the patients had a recovery of the neurological function that had a 1grade or 2grade improvement except 7 patients who were still in Grade A and 2 patients who were in Grade D. The implant was fused 35 months after operation. No infection, nail break, bar/plate break or loosening of the internal fixation occurred. Conclusion The artificial vertebral body of the biomimetic nHA/PA66 composite can effectively restore the height and the structure of the vertebra, can be fused with the vertebral body to reconstruct the spinal structural stability effectively, and can be extensively used in the clinical practice.
Objective To research the transfer of adenovirus human bone morphogenetic protein 4 (Ad-hBMP-4) to human degenerative lumbar intervertebral disc cells in vitro and analyze its effect on the proteoglycan, collagen type II, and Sox9 of intervertebral disc cells. Methods Identified Ad-hBMP-4 was amplified and detected. Degenerative lumbar intervertebral disc cells were aspirated from the degenerative lumbar intervertebral disc of patients with Modic III level disc protrusion (aged, 27-50 years). The expressing position of collagen type II was identified in the intervertebral disc cells through the laser confocal microscope. The intervertebral disc cells at passage 1 were transfected with Ad-hBMP-4 as experimental group. After 3 and 6 days of transfection, RT-PCR was used to detect the mRNA expressions of proteoglycan, collagen type II, and Sox9, and Western blot to detect the expressions of proteoglycan and collagen type II proteins. Non-transfected cells at passage 1 served as control group. Results The virus titer of Ad-hBMP-4 was 5 × 106 PFU/mL. No morphological changes in the cells after transfection by Ad-hBMP-4. Collagen type II mainly expressed in the cell cytoplasm. The mRNA expressions of the proteoglycan, collagen type II, and Sox9 in experimental group at 3 and 6 days after transfection were significantly higher than those in control group by RT-PCR (P lt; 0.05), and the expressions of proteoglycan and collagen type II proteins were significantly higher than those in contorl group by Western blot (P lt; 0.05). There were significant differences between 3 days and 6 days in experimental group (P lt; 0.05). Conclusion Ad-hBMP-4 could transfect human degenerative lumbar intervertebral cells with high efficiency and promote collagen type II, proteoglycan, and Sox9 expressions. hBMP-4 may play an important role in the repair process during early disc degeneration.