Objective To evaluate the feasibility and effectiveness of computer-assisted preoperative planning system—ACL Detector in anterior cruciate ligament (ACL) reconstruction. Methods Between March 2009 and January 2012, 80 patients with ACL rupture received arthroscopic ACL single-bundle reconstruction with autologous hamstring tendon transplantation. Before operation, the preoperative planning was done by computer-assisted preoperative planning system—ACL Detector (trial group, n=40) or by conventional method (control group, n=40). There was no significant difference in gender, age, disease duration, injury cause, preoperative Lysholm score, and preoperative International Knee Documentation Committee (IKDC) score between 2 groups (P gt; 0.05). After operation, the effectiveness was evaluated by Lachman test, pivot shift test, Lysholm score, and IKDC score; the digital three-dimensinal model of knee was reconstructed, and the impingement rate of ACL graft was measured. Results All incisions healed by first intention, and no complication was found. The patients were followed up 18-25 months (mean, 20 months) in trial group and 18-24 months (mean, 21 months) in control group. The Lysholm score and IKDC score were significantly increased at 18 months after operation when compared with preoperative scores (P lt; 0.05), but no significant difference was found between 2 groups (P gt; 0.05). The results of Lachman test and pivot shift test at 18 months after operation were significantly better than those before operation in 2 groups (P lt; 0.05), but no significant difference between 2 groups after operation (P gt; 0.05). MRI showed that impingement was observed in 1 case of trial group (2.50%) and in 8 cases of control group (20.00%), showing significant difference (χ2=4.51, P=0.03). Conclusion The computer-assisted preoperative planning system—ACL Detector could be successfully applied to ACL reconstruction. It has the same improvement in knee functional score as conventional surgery, but it is better than conventional surgery in reducing the impingement incidence.
Objective To investigate short-term effectiveness of spinal navigation with the intra-operative three-dimensional (3D)-imaging modality in pedicle screw fixation for congenital scoliosis (CS). Methods Between July 2010 and December 2011, 26 patients with CS were treated. Of 26 patients, 13 patients underwent pedicle screw fixation using the spinal navigation with the intra-operative 3D-imaging modality (navigation group), while 13 patients underwent the conventional technique with C-arm X-ray machine (control group). There was no significant difference in gender, age, hemivertebra number and location, major curve Cobb angle, and Risser grade between 2 groups (P gt; 0.05). Operation time, operative blood loss, frequency of the screw re-insertion, and postoperative complication were observed. The pedicle screw position was assessed by CT postoperatively with the Richter’s standard and the correction of Cobb angle was assessed by X-ray films. Results All patients underwent the surgery successfully without major neurovascular complication. There was no significant difference in operation time, operative blood loss, and pedicle screw location between 2 groups (P gt; 0.05). A total of 58 screws were inserted in navigation group, and 3 screws (5.2%) were re-inserted. A total of 60 screws were inserted in control group, and 10 screws (16.7%) were re-inserted. There was significant difference in the rate of pedicle screw re-insertion between 2 groups (χ2=3.975, P=0.046). Patients of navigation group were followed up 6-24 months, and 6-23 months in control group. According to Richter’s standard, the results were excellent in 52 screws and good in 6 screws in navigation group; the results were excellent in 51 screws, good in 5 screws, and poor in 4 screws in control group. Significant difference was found in the pedicle screw position between 2 groups (Z= — 1.992, P=0.046). The major curve Cobb angle of 2 groups at 1 week and last follow-up were significantly improved when compared with preoperative value (P lt; 0.05), but there was no significant difference between 1 week and last follow-up (P gt; 0.05). No significant difference in correction rate of the major curve Cobb angle was found between 2 groups at last follow-up (t=0.055, P=0.957). Conclusion Spinal navigation with the intra-operative 3D-imaging modality can improve the accuracy of pedicle screw implantation in patients with CS, and effectually reduce the rate of screw re-insertion, and the short-term effectiveness is satisfactory.
【Abstract】 Objective To evaluate the feasibility and effectiveness of reconstruction of mandibular bone defects using three-dimensional skull model and individualized titanium prosthetics from computer assisted design. Methods Between July 2002 and November 2009, 9 patients with mandibular defects accepted restorative operation using individualized bone prosthetics. Among 9 cases, 4 were male and 5 were female, aged 19-55 years. The causes of mandibulectomy were benign lesions in 8 patients and carcinoma of gingival in 1 patient. Mandibular defects exceeded midline in 2 cases, involved condylar in 4 cases, and was limited in one side without involvement of temporo-mandibular joint in 3 cases. The range of bone defects was 9.0 cm × 2.5 cm-17.0 cm × 2.5 cm. The preoperative spiral CT scan was performed and three-diamensional skull model was obtained. Titanium prosthetics of mandibular defects were designed and fabricated through multi-step procedure of reverse engineering and rapid prototyping. Titanium prosthetics were used for one-stage repair of mandibular bone defects, then two-stage implant denture was performed after 6 months. Results The individualized titanium prosthetics were inserted smoothly with one-stage operative time of 10-23 minutes. All the cases achieved incision healing by first intention and the oblique mandibular movement was corrected. They all got satisfactory face, had satisfactory contour and good occlusion. In two-stage operation, no loosening of the implants was observed and the abutments were in good position with corresponding teeth which were designed ideally before operation. All cases got satisfactory results after 1-9 years of follow-up. At last follow-up, X-ray examinations showed no loosening of implants with symmetry contour. Conclusion Computer assisted design and three-dimensional skull model techniques could accomplish the design and manufacture of individualized prosthetic for the repair of mandibular bone defects.
Objective To investigate the value of computer-aided design (CAD) in defining the resection boundary, reconstructing the pelvis and hip in patients with pelvis tumors. Methods Between November 2006 and April 2009, 5 cases of pelvis tumors were treated surgically using CAD technology. There were 3 males and 2 females with an average age of 36.4 years (range, 24-62 years). The cause was osteosarcoma, giant cell tumor of bone, and angiosarcoma in 1 case, respectively,and chondrosarcoma in 2 cases. According to the Enneking system for staging benign and mal ignant musculoskeletal tumors, regions I, I + II, III, IV, and I + IV is in 1 case, respectively. According to the principle of reverse engineering, 5 patients with pelvis tumors were checked with lamellar CT/MRI scanning, whose two-dimensional data were obtained in disease area. The three-dimensional reconstruction of pelvic anatomical model, precise resection boundary of tumor, individual surgical template, individual prosthesis, and surgical simulation were precisely made by computer with CAD software. Based on the proposal of CAD, the bone tumor was resected accurately, and allograft il ium with internal fixation instrument or allogeneic il ium with personal ized prosthetic replacement were used to reconstruct the bone defect after tumor was resected. Results The operation was successfully performed in 5 cases. The average operation time was 7.9 hours, and the average blood loss was 3 125 mL. Hemorrhage and cerebrospinal fluid leakage occurred in 1 case, respectively, and were cured after debridement. Five patients were followed up from 24 to 50 months (mean, 34.5 months). All patients began non-weight bearing walk with double crutches at 4-6 weeks after operation, and began walk at 3-6 months after operation. Local recurrence developed in 2 patients at 18 months after operation, and resection and radiotherapy were performed. According to International Society of Limb Salvage criteria for curative effectiveness of bone tumor l imb salvage, the results were excellent in 2 and good in 3. Conclusion The individual surgical template, individual prosthesis, and surgical simulation by CAD ensure the precision and rel iabil ity of pelvis tumors resection. The CAD technology promotes pelvis tumor resection and the reconstruction of pelvis to individual treatment stage, and good curative effectiveness can be obtained.
Objective To review recent advance in the research and appl ication of computer aided forming techniques for constructing bone tissue engineering scaffolds. Methods The l iterature concerning computer aided forming techniques for constructing bone tissue engineering scaffolds in recent years was reviewed extensively and summarized Results Several studies over last decade have focused on computer aided forming techniques for bone scaffold construction using various scaffold materials, which is based on computer aided design (CAD) and bone scaffold rapid prototyping (RP). CAD include medical CAD, STL, and reverse design. Reverse design can fully simulate normal bone tissue and could be very useful for the CAD. RP techniques include fused deposition model ing, three dimensional printing, selected laser sintering, three dimensional bioplotting, and low-temperature deposition manufacturing. These techniques provide a new way to construct bone tissue engineering scaffolds with complex internal structures. Conclusion With rapid development of molding and forming techniques, computer aided forming techniques are expected to provide ideal bone tissue engineering scaffolds.
Objective To investigate the development and appl ication of the computer aided surgery systems in the joint surgery field. Methods The l iteratures were extensively reviewed to analysis the usefulness of current active, semi-active and passive computer aided surgery systems in solving the cl inical problems of joint surgery. Results Several computer aided surgery systems have met the high technique demands, such as the precision of anatomical position and orientation, the accuracy of normal l imb al ignment restoration, the optimum of instrumentation control in arthroplasty, peri-articular osteotomy and minimally invasive procedure. Conclusion Computer aided joint surgery systems facil itate precise surgical techniques to achieve ideal operative outcome.
Objective To evaluate the feasibil ity and cl inical significance of the computed tomography angiography (CTA) for the latissimus dorsi muscle (LDM) flap transplantation. Methods From September 2007 to August 2008, 3 cases of soft tissue defects in l imbs were treated with LDM flap transplantation. Three patients included 2 males and 1 female whowere 23 to 42 years old. All of soft tissue defects were caused by trauma. The locations were the forearm in 2 cases and the leg in 1 case. The area of defect was 17 cm × 8 cm-20 cm × 10 cm. All cases received CTA to observe the distribution and anastomosis of thoracodorsal artery. Subsequently, three-dimensional computer reconstruction were carried out to display the stereoscopic structure of the LDM flap and to design the LDM flap before operation. Results The anatomy characteristic of LDM flap can be displayed accurately by the three-dimensional reconstruction model. The distribution of thoracodorsal artery in 3 cases of flaps was in concordance with preoperative design completely. All the flaps were excised successfully, the area of the flap was 19 cm × 10 cm-22 cm × 12 cm. All the transferred flaps survived completely. All cases were followed up from 4 months to 12 months. The color and texture of the flaps were good. Conclusion The three-dimensional reconstructive images can provide visible, stereoscopic and dynamic anatomy for cl inical appl ication of LDM flap. The digitized three-dimensional reconstructive models of LDM flap structures can be appl ied in cl inical training and pre-operative design.
【Abstract】 Objective To investigate the appl ication and significance of computer assisted orthopedicsurgery(CAOS) in orthopedic trauma surgery. Methods In orthopedic trauma surgery, the appl ication status of CAOS was?analysed and the related problems were summarized. Results At present, CAOS is seldom used to reduce fractures but frequently used to insert internal fixation devices and reconstruct the cruciate l igament in orthopedic trauma surgery. And the studies have shown its superiority. During CAOS appl ication, surgeons should pay attention to some problems such as the disadvantages, cl inical evaluation, the roles of the surgeons and correct micro-traumatic concept. Conclusion CAOS is very important and cannot be replaced in orthopedic trauma minimal invasion surgery and surgeons should pay attention to some important related problems to make it develop successfully in the study of CAOS.
【Abstract】 Objective To introduce several navigation systems in anterior cruciate l igament reconstructionand to investigate the appl ication of navigation systems for the improvement in reconstruction of the anterior cruciatel igament. Methods The related l iterature was reviewed extensively, and the main current computer assisted surgery systems(OthoPilot system, Bone Morphing system, Fluoroscopic-based system, etc) for util ization in the anterior cruciate l igament reconstructionwere analyzed. Results The computer-assisted systems can enhance the accurate placement of tunnels. Accordingto the anatomical and isometric parameters, graft impingement on the intercondylar notch could be avoided, and individualideal implantation using 3D visual ization local isers was achieved. Conclusion It is possible that computer-assisted systemswill enable surgeons to better acquire the accuracy and rel iabil ity of the various operative techniques, to meet the demand ofsurgeon’s surgical optimisation and to improve the cl inical results.
【Abstract】 Objective To investigate the qual itative rotation al ignment of components in total knee arthroplastyand the accuracy and the effectiveness of Bone Morphing computer assisted system when qual itatively practicing. MethodsFrom November 2002 to June 2003, 21 patients with three compartments osteoarthritis(21 knees) were treated by primarytotal knee arthroplasty after the conservative medical treatment failed, with the assistance of a “Bone Morphing” CeravisionSystem, implanted posterior stabil ized total knee prosthesis. Twenty-one patients included 5 males (5 knees) and 16 females (16knees) with an average age of 72.4 years (64-79 years) . The locations were left knee in 10 cases and right knee in 11 cases. Thepatients suffered from knee pain and l imitation of movement from 2 to 10 years. There were 14 genu varum and 7 genu valgumpreoperatively. The relative preoperative, intraoperative and postoperative data from cl inical check-up, the X-ray films and theintraoperative components rotational al ignment real-time records in CD Rom were analyzed. Results All operative incisionshealed up by first intension. Twenty-one patients were followed up 12-16 months(mean 13.3 months). For the achievement ofproper lower l imb al ignment and normal frontal laxity of knee, rotational al ignment of femoral components was from internalrotation (IR)1° to external rotation (ER) 5°, tibial components from IR 0° to ER 5°. In patients with genu varum, the rotationalal ignment of the femoral components was ER 1°- ER 5°, of tibial components ER 2°- ER 5°. In patients with genu valgum, the rotationalal ignment of femoral components was IR 1°- ER 4°, of tibial components IR 0°-ER 4°. After 3 months of operation, themean flexion angle measured as range of motion (ROM) was 115°(105-130°), the frontal laxsity measured as 0.2-0.5 cm (mean0.27 cm) of internal laxity and 1.0-2.5 cm (mean 1.7 cm) for external laxity, there were no knee pain, paterllar instabil ity or dislocationand abnormal knee frontal laxity. Conclusion Using Bone Morphing computer-assisted system can optimise theindividual components rotation al ignment accurately.