Objective To investigate the value of computer-aided design (CAD) in defining the resection boundary, reconstructing the pelvis and hip in patients with pelvis tumors. Methods Between November 2006 and April 2009, 5 cases of pelvis tumors were treated surgically using CAD technology. There were 3 males and 2 females with an average age of 36.4 years (range, 24-62 years). The cause was osteosarcoma, giant cell tumor of bone, and angiosarcoma in 1 case, respectively,and chondrosarcoma in 2 cases. According to the Enneking system for staging benign and mal ignant musculoskeletal tumors, regions I, I + II, III, IV, and I + IV is in 1 case, respectively. According to the principle of reverse engineering, 5 patients with pelvis tumors were checked with lamellar CT/MRI scanning, whose two-dimensional data were obtained in disease area. The three-dimensional reconstruction of pelvic anatomical model, precise resection boundary of tumor, individual surgical template, individual prosthesis, and surgical simulation were precisely made by computer with CAD software. Based on the proposal of CAD, the bone tumor was resected accurately, and allograft il ium with internal fixation instrument or allogeneic il ium with personal ized prosthetic replacement were used to reconstruct the bone defect after tumor was resected. Results The operation was successfully performed in 5 cases. The average operation time was 7.9 hours, and the average blood loss was 3 125 mL. Hemorrhage and cerebrospinal fluid leakage occurred in 1 case, respectively, and were cured after debridement. Five patients were followed up from 24 to 50 months (mean, 34.5 months). All patients began non-weight bearing walk with double crutches at 4-6 weeks after operation, and began walk at 3-6 months after operation. Local recurrence developed in 2 patients at 18 months after operation, and resection and radiotherapy were performed. According to International Society of Limb Salvage criteria for curative effectiveness of bone tumor l imb salvage, the results were excellent in 2 and good in 3. Conclusion The individual surgical template, individual prosthesis, and surgical simulation by CAD ensure the precision and rel iabil ity of pelvis tumors resection. The CAD technology promotes pelvis tumor resection and the reconstruction of pelvis to individual treatment stage, and good curative effectiveness can be obtained.
Objective To introduce the recent advances of the application of computer technology in tissue engineering. Methods The recent original articlesrelated to computer technology, medical image technology, computer-aided design, the advanced manufacture technology were summarized and systematically analyzed.Results Computer-aided tissue engineering is a new fieldon tissue engineering. It is the future direction of tissue engineering study. This article reviews recent development of medical CT/MRI scanning, three-dimensional reconstruction, anatomical modeling, computeraided design, computer-aided manufacturing, rapid prototyping， RP manufacturing of tissue engineering scaffolds and computeraided implantation.Conclusion Computer-aided tissue engineering can be used in scaffolds design and fabrication, computer-aided artificial tissue implantation. It is a new field on tissue engineering.
Objective To improve the fitness and initial fixation strength between the hip and bone and to optimize the shape of the prosthetic implants. Methods The cross-section of hip canal was automatically extracted by Image processing. By using taper curve fit,hypocurve predigesting and the curve of shape center fit, the parameters of long-short diameter and the curve of shape center were got to design the hip shape.CAD was adopted to analyze and evaluate the configuration of bone and shape of hip.The “peg-in-hole” was employed to optimize the shape of implant by the visual test of “Drawingout” in computer. Results 23.2% hip-bone average matching rate and 0.033% bone damage rate were presented by CAD analysis. The implant extraction path were validated visually and quantitatively by measuring the maximum amount of overlap in the path configuration. Conclusion The valuable method for prothsetic hip design was presented by the way of image processing,graphics design and optimizingdesign in this study.
ObjectiveTo explore the clinical value of computer-assisted surgical planning in the treatment of ankle fractures. MethodsBetween January 2012 and January 2014, open reduction and internal fixation were performed on 42 patients with ankle fractures. There were 22 males and 20 females with an average age of 52 years (range, 19-72 years). The causes were spraining injury (20 cases), traffic accident injury (14 cases), and falling from height injury (8 cases). The time from injury to operation was 5 hours to 12 days (mean, 2.5 days). All fractures were closed trimalleolar fractures. According to Lauge-Hansen classification, 25 cases were rated as supination extorsion type IV, 13 as pronation extorsion type IV, and 4 as pronation abduction type Ⅲ. The preoperative planning was made by virtual reduction and internal fixation using Superimage software. ResultsThe mean operation time was 93.7 minutes (range, 76-120 minutes). Delayed wound healing occurred in 1 case, and secondary healing was obtained after treatment; primary healing of incision was achieved in the other patients. Postoperative X-ray films and CT images showed anatomic reduction of fracture and good position of internal fixation. All patients were followed up 14.6 months on average (range, 9-27 months). The range of motion of the affected ankle was close to the normal side at 6-8 weeks. The mean fracture healing time was 13.1 weeks (range, 11-17 weeks). Degenerative change of the ankle joint was observed in 3 cases (7.1%) with manifestation of mild narrowing of joint space on the X-ray films at last follow-up. According to Baird-Jackson score system, the results were excellent in 24 cases, good in 13 cases, and fair in 5 cases, with an excellent and good rate of 88%. ConclusionComputer-assisted surgical planning for ankle fractures can help surgeons identify type of ankle fractures and improve surgical scheme for guiding fracture reduction and selecting and placing implants, so good effectiveness can be obtained.
ObjectiveTo investigate the accuracy of the two-dimension computer-aided surgery navigation system in the lumbar pedicle screw fixation on recombinant CT section after operation. MethodsBetween February 2011 and April 2013, 218 patients undergoing lumbar spinal pedicle screw fixation were divided into 2 groups:two-dimension computer-aided surgery navigation system was used in 95 cases (the navigation group) and X-ray fluoroscopy assistant technology in 123 cases (the fluoroscopy assistant group). There was no significant difference in age, gender, and type of disease between 2 groups (P>0.05). The mean operating time, blood loss volume, and fluoroscopy times, and the one-time success rate of pedicle screw implant were observed. The sagittal screw angle (SSA), the relationship between the pedicle cortex and screw, the accuracy rate of pedicle screw, and the sagittal angle on both sides (SBA) were observed. ResultsA total of 504 screws were inserted in navigation group, 432 (85.7%) were inserted successfully at first time and 472 (85.7%) were inserted successfully at end time. A total of 656 screws were inserted in fluoroscopy assistant group, 474 (72.3%) were successfully inserted at first time, and 563 (85.8%) were inserted successfully at end time. There were significant differences in the one-time success rate and final success rate of pedicle screw implant between 2 groups (χ2=30.19, P=0.00; χ2=18.16, P=0.00). There was no significant difference in the mean operating time and the blood loss volume of pedicle screw implant between 2 groups (t=0.88, P=0.38; t=1.47, P=0.14); but the fluoroscopy times of pedicle screw implant in navigation group 0.7±0.3 were significantly less than that in fluoroscopy assistant group 1.5±1.0 (t=-8.09, P=0.00). The SSA and SBA in navigation group[(3.7±0.9)° and (1.7±0.8)°] were significantly less than those in fluoroscopy assistant group[(6.0±1.7)° and (3.5±1.6)°] (t=-26.92, P=0.00; t=-22.49, P=0.00). ConclusionThe sagittal screw angle and accuracy of pedicle screw implant can be significantly improved using the two-dimension computer-aided surgery navigation system in lumbar posterior fixation.
ObjectiveTo evaluate the clinical significance of individualized reference model of sagittal curves by three-dimensional (3D) printing technique and computer-aided navigation system for lumbar spondylolisthesis. MethodsBetween February 2011 and October 2012, 66 patients with lumbar spondylolisthesis underwent posterior lumbar interbody fusion (PLIF) by traditional operation in 36 cases (control group) and by individualized reference model of sagittal curves by 3D printing technique and computer-aided navigation system in 30 cases (trial group). There was no significant difference in gender, age, disease duration, segment, type of disease, degree of spondylolisthesis, and preoperative the visual analogue scale (VAS) of low back pain and leg pain between 2 groups (P>0.05). The operation time, blood loss, fluoroscopy times, VAS score of low back pain and leg pain were compared between 2 groups; the sagittal screw angle (SSA), accuracy rate of pedicle screw, Taillard index, disc height recovery rate, and sagittal angle recovery rate were compared between 2 groups. ResultsThere was no significant difference in operation time and blood loss between 2 groups (P>0.05). But fluoroscopy times of control group were significantly higher than those of trial group (P<0.05). One case had radicular symptoms after operation in control group. The patients of 2 groups were followed up 24-36 months (mean, 26 months). The VAS scores of low back pain and leg pain at last follow-up were significantly better than pre-operative scores in 2 groups (P<0.05); VAS score of low back pain in trial group at last follow-up was significantly lower than that in control group (P<0.05). The accuracy rate of pedicle screw was 81.9% (118/144) in control group and 91.7% (110/120) in trial group, showing significant difference (χ2=5.25, P=0.03). There was significant difference in SSA between 2 groups at immediate after operation (t=-6.21, P=0.00). At immediate after operation and last follow-up, Taillard index, disc height recovery rate, and sagittal angle recovery rate in trial group were significantly better than those in control group (P<0.05). ConclusionPLIF by individualized reference model of sagittal curves by 3D printing technique and computer-aided navigation system can effectively correct spondylolisthesis, recover the lumbar sagittal angle and improve the VAS score of low back pain though it has similar operation time and blood loss to traditional PLIF.
Objective To explore the effectiveness of computer-aided technology in the treatment of primary elbow osteoarthritis combined with stiffness under arthroscopy. Methods The clinical data of 32 patients with primary elbow osteoarthritis combined with stiffness between June 2018 and December 2020 were retrospectively analyzed. There were 22 males and 10 females with an average age of 53.4 years (range, 31-71 years). X-ray film and three-dimensional CT examinations showed osteophytes of varying degrees in the elbow joint. Loose bodies existed in 16 cases, and there were 7 cases combined with ulnar nerve entrapment syndrome. The median symptom duration was 2.5 years (range, 3 months to 22.5 years). The location of bone impingement from 0° extension to 140° flexion of the elbow joint was simulated by computer-aided technology before operation and a three-dimensional printed model was used to visualize the amount and scope of impinging osteophytes removal from the anterior and posterior elbow joint to accurately guide the operation. Meanwhile, the effect of elbow joint release and impinging osteophytes removal was examined visually under arthroscopy. The visual analogue scale (VAS) score, Mayo elbow performance score (MEPS), and elbow range of motion (extension, flexion, extension and flexion) were compared between before and after operation to evaluate elbow function. Results The mean operation time was 108 minutes (range, 50-160 minutes). All 32 patients were followed up 9-18 months with an average of 12.5 months. There was no other complication such as infection, nervous system injury, joint cavity effusion, and heterotopic ossification, except 2 cases with postoperative joint contracture at 3 weeks after operation due to the failure to persist in regular functional exercises. Loose bodies of elbow and impinging osteophytes were removed completely for all patients, and functional recovery was satisfactory. At last follow-up, VAS score, MEPS score, extension, flexion, flexion and extension range of motion significantly improved when compared with preoperative ones (P<0.05). Conclusion Arthroscopic treatment of primary elbow osteoarthritis combined with stiffness using computer-aided technology can significantly reduce pain, achieve satisfactory functional recovery and reliable effectiveness.
Early screening is an important means to reduce breast cancer mortality. In order to solve the problem of low breast cancer screening rates caused by limited medical resources in remote and impoverished areas, this paper designs a breast cancer screening system aided with portable ultrasound Clarius. The system automatically segments the tumor area of the B-ultrasound image on the mobile terminal and uses the ultrasound radio frequency data on the cloud server to automatically classify the benign and malignant tumors. Experimental results in this study show that the accuracy of breast tumor segmentation reaches 98%, and the accuracy of benign and malignant classification reaches 82%, and the system is accurate and reliable. The system is easy to set up and operate, which is convenient for patients in remote and poor areas to carry out early breast cancer screening. It is beneficial to objectively diagnose disease, and it is the first time for the domestic breast cancer auxiliary screening system on the mobile terminal.
Objective To compare the effect of three-dimensional visual (3DV) model, three-dimensional printing (3DP) model and computer-aided design (CAD) modified 3DP model in video-assisted thoracoscopic surgery (VATS) sublobular resection. MethodsThe clinical data of patients who underwent VATS sublobular resection in the Affiliated Hospital of Hebei University from November 2021 to August 2022 were retrospectively analyzed. The patients were divided into 3 groups including a 3DV group, a 3DP group and a CAD-3DP group according to the tools used. The perioperative indexes and subjective evaluation of operators, patients and their families were compared. ResultsA total of 22 patients were included. There were 5 males and 17 females aged 32-77 (56.95±12.50) years. There were 9 patients in the 3DV group, 6 patients in the 3DP group, and 7 patients in the CAD-3DP group. There was no statistical difference in the operation time, intraoperative blood loss, drainage volume, hospital stay time or postoperative complications among the groups (P>0.05). Based on the subjective evaluations of 4 surgeons, the CAD-3DP group was better than the 3DV group in the preoperative planning efficiency (P=0.025), intuitiveness (P=0.045) and doctor-patient communication difficulty (P=0.034); the CAD-3DP group was also better than the 3DP group in the overall satisfaction (P=0.023), preoperative planning difficulty (P=0.046) and efficiency (P=0.014). Based on the subjective evaluations of patients and their families, the CAD-3DP group was better than the 3DP group in helping understand the vessel around the tumor (P=0.016), surgical procedure (P=0.020), procedure selection (P=0.029), and overall satisfaction (P=0.048); the CAD-3DP group was better than the 3DV group in helping understand the tumor size (P=0.038). ConclusionCAD-modified 3DP model has certain advantages in pre-planning, intraoperative navigation and doctor-patient communication in the VATS sublobectomy.