west china medical publishers
Author
  • Title
  • Author
  • Keyword
  • Abstract
Advance search
Advance search

Search

find Author "DUAN Xiaojun" 6 results
  • RHEUMATOID FOREFOOT RECONSTRUCTION WITH FIRST METATARSOPHALANGEAL FUSION AND ARTHROPLASTY OF LESSER METATARSAL HEADS

    Objective To evaluate the surgical treatment and effectiveness of rheumatoid forefoot reconstruction with arthrodesis of the first metatarsophalangeal joint and arthroplasty of lesser metatarsal heads. Methods Between January 2007 and August 2009, 7 patients with rheumatoid forefoot were treated by reconstruction with arthrodesis of the first metatarsophalangeal joint and arthroplasty of lesser metatarsal heads. They were all females with an average age of 62 years (range, 56-71 years) and with an average disease duration of 16 years (range, 5-30 years). All patients manifested hallux valgus, hammer toe or mallet toe of 2-5 toes, 5 feet complicated by subluxation of the second metatarsophalangeal joint. The improved American Orthopaedic Foot amp; Ankle Society (AOFAS) score was 36.9 ± 6.4. The hallux valgus angle was (46 ± 5)°, and the intermetarsal angle was (12 ± 2)° by measuring the load bearing X-ray films preoperatively. Results All incisions healed by first intention after operation. The X-ray films showed bone fusion of the first metatarsophalangeal joint at 3-4 months after operation. Seven patients were followed up 2.9 years on average (range, 2-4 years), gait was improved and pain was rel ieved. The hallux valgus angle decreased to (17 ± 4)° and the intermetarsal angle was (11 ± 2)° at 3 months postoperatively, showing significant differences when compared with preoperative values (P lt; 0.05). The improved AOFAS score was 85.3 ± 5.1 at 2 years postoperatively, showing significant difference when compared with preoperative score (t=4.501, P=0.001). One patient had recurrent metatarsalgia at 4 years after operation. Conclusion Arthrodesis of the first metatarsophalangeal joint and arthroplasty of lesser metatarsal heads for rheumatoid forefoot reconstruction can correct hallux valgus, remodel the bearing surface of the forefoot, and rel ieve pain, so it can be considered as a procedure that provides improvement in the cl inical outcome.

    Release date:2016-08-31 04:23 Export PDF Favorites Scan
  • PLASTICITY AND APPLICATION OF MARROW-DERIVED STEM CELLS

    Objective To investigate plasticity of marrow-derived stem cells,possible mechanisms and application. Methods The recent literature concerned plasticity of marrow-derived stem cells was extensively reviewed. Results Although stem cells plasticity has not been proven, there is more and more evidenceto show that the stem cells may have the plasticity and at least four differentmechanisms are explained.Conclusion The extensive research will be required. If the plasticity is proven, adult stem cells can be used for more therapeutic purposes. For example, the use of stem cells from bone marrow may correct geneticor degenerative disorders of a second organ from which stem cells are more difficult to isolate.

    Release date:2016-09-01 09:29 Export PDF Favorites Scan
  • STUDY ON SHAPE AND STRUCTURE OF CALCIFIED CARTILAGE ZONE IN NORMAL HUMAN KNEE JOINT

    To explore the shape and structure of calcified cartilage zone and its interface between the non-calcified articular cartilage and subchondral bone plate. Methods The normal human condyles of femur (n=20) were obtained from the tissue bank donated by the residents, 10 males and 10 females, aged 17-45 years. The longitudinal and transverse paraffin sections were prepared by the routine method. The shape and structure of calcified cartilage zone were observed with theSafranin O/fast green and von kossa stain method. The interface conjunction among zones of cartilage was researched by SEM and the 3D structural model was establ ished by serial sections and model ing technique. Results Articular bone-cartilage safranin O/fast green staining showed that cartilage was stained red and subchondral bone was stained blue. The calcified cartilage zone was located between the tidemark and cement l ine. Von kossa staining showed that calcified cartilage zone was stained black and sharpness of structure border. Upper interface gomphosised tightly with the non-calcified cartilage by the wave shaped tidemark and lower interface anchored tightly with the subchondral bone by the uneven comb shaped cement l ine. The noncalcified cartilage zone was interlocked tightly in the manner of “ravine-engomphosis” by the calcified cartilage zone as observed under SEM, and the subchondral bone was anchored tightly in the manner of “comb-anchor” by the in the calcified cartilage zone 3D reconstruction model. Conclusion The calcified cartilage zone is an important structure in the articular cartilage. The articular cartilage is fixed firmly into subchondral bone plate by the distinctive conjunct interfaces of calcified cartilage zone.

    Release date:2016-09-01 09:12 Export PDF Favorites Scan
  • Clinical application and research status of open wedge high tibial osteotomy

    ObjectiveTo summarize the clinical application and research status of open wedge high tibial osteotomy (OWHTO).MethodsRelevant literature at home and abroad was reviewed, and the clinical application, effectiveness and complications, technical comparison, and surgical skills of OWHTO were summarized and analyzed.ResultsOWHTO is an effective treatment for mild to moderate medial compartment osteoarthritis due to knee varus. This method can delay the injury process of medial compartment of the knee, delay the time of total knee arthroplasty, and even avoid joint replacement surgery by adjusting the axial alignment of the lower extremity to the non-pathological lateral compartment through osteotomy and orthopedic. OWHTO has the advantages of small incision, dynamic adjustment of the axial alignment of the lower extremity, accurate correction of malformation, and rapid postoperative recovery.ConclusionWith the development of surgical instruments and techniques, OWHTO once again enter the sight of orthopedic surgeons. This technique can solve the pain symptoms of arthritis, correct the tibial varus deformity and reconstruct the axial alignment of the lower extremity, and satisfactory clinical results has been obtained.

    Release date:2019-05-06 04:48 Export PDF Favorites Scan
  • SHORT-TERM EFFECTIVENESS OF ANTERIOR CRUCIATE LIGAMENT RECONSTRUCTION WITH LARS ARTIFICIAL LIGAMENT

    Objective To investigate the surgical technique and short-term effectiveness of anterior cruciate l igament (ACL) reconstruction with LARS artificial l igament. Methods Between November 2008 and April 2010, eighty patients withACL injury were treated with LARS artificial l igament under arthroscope and successfully followed up. There were 51 males and 29 females, aged from 17 to 43 years with an average of 29.2 years. The injuries were caused by sport in 63 cases, traffic accident in 14 cases, and bruise in 3 cases. There were 43 left knees and 37 right knees. The disease duration ranged from 10 days to 11 months. The anterior drawer test, Lachman test, and pivot shift test for all cases were rated as positive. The preoperative Lysholm score was 55.4 ± 5.7, Irgang score was 48.3 ± 6.2, and Larson score was 54.8 ± 7.4; and the International Knee Documentation Committee (IKDC) score was lower than normal level in all cases. Obl ique coronal MRI showed ACL injury in all cases. Residual ACL and synovium were preserved during surgery. Results All incisions healed by first intention without compl ication of infection or deep venous thrombosis. All patients were followed up 7 to 24 months with an average of 16.8 months. There were 3 cases of screws exposure toward femoral cortical bone, 2 cases of loosening tibial screw, and 1 case of knee extension l imitation, and they were cured after symptomatic treatment. No LARS artificial l igament rupture and joint fibrosis occurred during followup. At last follow-up, the results of anterior drawer test, Lachman test, and pivot shift test were positive in 2, 3, and 3 patients,respectively. There were significant differences in Lysholm, Irgang, and Larson scores of affected knees between preoperation and 6 weeks postoperatively, last follow-up, respectively (P lt; 0.05). The normal rate of IKDC score were 43.75% (35/80) and 97.50% (78/80) at 6 weeks postoperatively and last follow-up, respectively. Conclusion The viscoelastic properties of LARS artificial l igament is different from that of biological materials. The graft should be fixed at a relatively extension position to avoid knee extension l imitation and sl ight loosening of graft tension is permitted at flexion position. Good cl inical result could be achieved if the technique is well appl ied.

    Release date:2016-08-31 05:44 Export PDF Favorites Scan
  • Gait analysis after total knee arthroplasty assisted by three-dimensional printing navigation template

    ObjectiveTo explore the gait trajectory characteristics of patients after total knee arthroplasty (TKA) assisted by three-dimensional (3D) printing navigation template.MethodsTwenty female patients (20 knees) with knee osteoarthritis who were treated with TKA assisted by 3D printing navigation template between February 2017 and February 2018 were selected as the 3D printing group. The patients were 50-69 years old, with an average age of 57.2 years. The disease duration was 4-7 years, with an average of 5.6 years. The osteoarthritis was classified as Kellgren-Lawrence Ⅲ level in 5 cases and Ⅳ level in 15 cases. The preoperative hip-knee-ankle angle (HKA) was (170.8±5.6)°. All patients were varus deformity. According to age and affected side, 20 healthy female volunteers were selected as the control group. The volunteers were 51-70 years old, with an average age of 56.7 years. Preoperative HKA was (178.8±0.6)°. There was significant difference in HKA between the two groups (P>0.05). The HKA, Western Ontario and McMaster University Osteoarthritis Index (WOMAC), and visual analogue scale (VAS) scores of the 3D printing group before and after operation were compared. At 6 months after operation, the gait trajectory characteristics of 3D printing group and control group were analyzed by Vicon gait capture system. The kinematics parameters included velocity, cadence, stride length, maximum knee flexion angle (stance), minimum knee flexion angle (stance), maximum knee flexion angle (swing), mean hip rotation angle (stance), mean ankle rotation angle (stance).ResultsThe incisions of 3D printing group healed by first intention, with no complications. All patients were followed up 7-12 months (mean, 9.0 months). The WOMAC and VAS scores at 6 months after operation were significant lower than those before operation (P<0.05). The HKA was (178.8±0.8)° at 4 weeks after operation and the difference was significant when compared with that before operation (t=39.203, P=0.000). The position of the prosthesis was good. The femoral posterior condyle osteotomy line, surgical transepicondylar axis, and patella transverse line were parallel, varus deformity was corrected, and lower limb alignment was restored to neutral position. Gait analysis at 6 months after operation showed that the differences in all kinematics parameters between the two groups were significant (P<0.05).ConclusionAssisted by 3D printing navigation template, TKA can alleviate pain symptoms and correct deformity, with satisfactory early effectiveness. Compared with healthy people, the early postoperative gait of the patients were characterized by decreasing velocity, cadence, stride length, knee flexion range, and increasing compensatory hip and ankle rotation range.

    Release date:2019-07-23 09:50 Export PDF Favorites Scan
1 pages Previous 1 Next

Format

Content