ObjectiveTo summarize the application and research progress of robotic-arm in total knee arthroplasty (TKA).MethodsRelevant literature at home and abroad was extensively reviewed to analyze the advantages and disadvantages of robotic-arm assisted TKA (RATKA).ResultsAccurate reconstruction of lower extremity alignment and rotation alignment, accurate osteotomy and implant prosthesis in TKA are very important to improve the effectiveness and prolong the life of the prosthesis. Traditional TKA deviations occur in key links such as osteotomy due to operator’s operation. RATKA solves the above problems to a certain extent and can assist accurate osteotomy and implant prosthesis, and protect the soft tissues around the knee joint. Patients’ satisfaction after RATKA is high, and the operator’s learning curve is shorter, which improves the efficiency of the operation. But it also has disadvantages such as prolonged operation time, increased complications and medical costs.ConclusionPreliminary clinical application studies have shown that RATKA has satisfactory effectiveness, but its definite advantages compared with traditional TKA need to be confirmed by a large number of randomized controlled trials and long-term follow-up.
ObjectiveTo investigate the improvement of femoral rotation alignment in total knee arthroplasty (TKA) by robotic-arm assisted positioning and osteotomy and its short-term effectiveness.MethodsBetween June 2020 and November 2020, 60 patients (60 knees) with advanced osteoarthritis of the knee, who met the selection criteria, were selected as the study subjects. Patients were randomly divided into two groups according to the random number table method, with 30 patients in each group. Patients were treated with robotic-arm assisted TKA (RATKA) in trial group, and with conventional TKA in control group. There was no significant difference in gender, age, side and course of osteoarthritis, body mass index, and the preoperative hip-knee-ankle angle (HKA), lateral distal femoral angle (LDFA), medial proximal tibial angle (MPTA), posterior condylar angle (PCA), knee society score-knee (KSS-K) and KSS-function (KSS-F) scores between the two groups (P>0.05). The clinical (KSS-K, KSS-F scores) and imaging (HKA, LDFA, MPTA, PCA) evaluation indexes of the knee joints were compared between the two groups at 3 months after operation.ResultsAll patients were successfully operated. The incisions in the two groups healed by first intention, with no complications related to the operation. Patients in the two groups were followed up 3-6 months, with an average of 3.9 months. KSS-K and KSS-F scores of the two groups at 3 months after operation were significantly higher than those before operation (P<0.05), but there was no significant difference between the two groups (P>0.05). X-ray re-examination showed that the prosthesis was in good position, and no prosthesis loosening or sinking occurred. HKA, MPTA, and PCA significantly improved in both groups at 3 months after operation (P<0.05) except LDFA. There was no significant difference in HKA, LDFA, and MPTA between the two groups (P>0.05). PCA in trial group was significantly smaller than that in control group (t=2.635, P=0.010).ConclusionRATKA can not only correct knee deformity, relieve pain, improve the quality of life, but also achieve the goal of restoring accurate femoral rotation alignment. There was no adverse event after short-term follow-up and the effectiveness was satisfactory.
【Abstract】 Objective To investigate the method to avoid lengthening lower limbs after total hip arthroplasty in patients with congenital short femoral neck. Methods The clinical data were analyzed retrospectively from 38 patients undergoing unilateral total hip arthroplasty between April 2005 and December 2010. There were 26 males and 12 females, aged 45-78 years (mean, 62.3 years). Among these cases, there were 11 cases of avascular necrosis of the femoral head, 17 cases of hip osteoarthritis, and 10 cases of femoral neck fracture. Before operation, 29 cases had leg length discrepancy; and the shortened length of the legs was 10-24 mm with an average of 14.5 mm by clinical measurement, and was 11-25 mm with an average of 14.7 mm by X-ray film measurement. The Harris score before operation was 44.0 ± 3.6. Results At 1 day after operation, 3 cases had legs lengthening by clinical and X-ray film measurement; limb length difference less than 10 mm was regarded as equal limb length in the other 35 patients (92.1%). All incisions healed by first intention, and no complication of infection or lower limb deep venous thrombosis occurred. In 3 patients who had legs lengthening, 1 patient had abnormal gait and slight limping after increasing heel pad because the lower limb was lengthened by 16 mm, and 2 patients had slight limping. The other patients could walk normally and achieved pain relief of hip. Thirty-six patients were followed up 12-68 months (mean, 43.8 months). The Harris score was 86.7 ± 2.3 after 6 months, showing significant difference (t=3.260, P=0.031) when compared with that before operation. The X-ray films showed no prosthetic loosening or subsidence. Conclusion For patients with congenital short femoral neck during total hip arthroplasty, the surgeons should pay attention to osteotomy plane determination, limb length measurement, and use of the prosthesis with collar to avoid the lengthening lower limbs
ObjectiveTo investigate the effect of three-dimensional (3D) printing guide plate on improving femoral rotational alignment and patellar tracking in total knee arthroplasty (TKA).MethodsBetween January 2018 and October 2018, 60 patients (60 knees) with advanced knee osteoarthritis who received TKA and met the selection criteria were selected as the study subjects. Patients were randomly divided into two groups according to the random number table method, with 30 patients in each group. The TKA was done with the help of 3D printing guide plate in the guide group and following traditional procedure in the control group. There was no significant difference in gender, age, disease duration, side, and preoperative hip-knee-ankle angle (HKA), posterior condylar angle (PCA), patella transverse axis-femoral transepicondylar axis angle (PFA), Hospital for Special Surgery (HSS) score, and American Knee Society (AKS) score (P>0.05).ResultsAll incisions healed by first intention and no complications related to the operation occurred. All patients were followed up 10-12 months, with an average of 11 months. HSS score and AKS score of the two groups at 6 months after operation were significantly higher than those before operation (P<0.05), but there was no significant difference between the two groups (P>0.05). Postoperative X-ray films showed that the prosthesis was in good position, and no prosthesis loosening or sinking occurred during follow-up. HKA, PCA, and PFA significantly improved in the two groups at 10 months after operation compared with those before operation (P<0.05). There was no significant difference in HKA at 10 months between the two groups (t=1.031, P=0.307). PCA and PFA in the guide group were smaller than those in the control group (P<0.05).ConclusionApplication of 3D printing guide plate in TKA can not only correct the deformity of the knee joint and alleviate the pain symptoms, but also achieve the goal of the accurate femoral rotation alignment and good patellar tracking.
The decrease of corneal stiffness is the key factor leading to keratoconus, and the corneal collagen fiber stiffness and fiber dispersion are closely related to the corneal biomechanical properties. In this paper, a finite element model of human cornea based on corneal microstructure, namely collagen fiber, was established before and after laser assisted in situ keratomileusis (LASIK). By simulating the Corvis ST process and comparing with the actual clinical results, the hyperelastic constitutive parameters and corneal collagen fiber stiffness modulus of the corneal material were determined before and after refractive surgery. After LASIK, the corneal collagen fiber stiffness modulus increased significantly, and was highly correlated with central corneal thickness (CCT). The predictive relationship between the corneal collagen fiber stiffness modulus and the corresponding CCT before and after surgery was: k1 before = exp(9.14 − 0.009CCTbefore), k1 after = exp(8.82 − 0.008CCTafter). According to the results of this study, the central corneal thickness of the patient can be used to estimate the preoperative and postoperative collagen fiber stiffness modulus, and then a personalized corneal model that is more consistent with the actual situation of the patient can be established, providing a theoretical reference for more accurately predicting the safe surgical cutting amount of the cornea.
ObjectiveTo systematically evaluate the correlation between interpersonal stress and suicidal ideation. MethodsThe PubMed, EMbase, Cochrane Library, CBM, WanFang Data and CNKI databases were searched to collect studies on the correlation between interpersonal pressure and suicidal ideation from database inception to April 27, 2022. Two researchers independently screened the literature, extracted data and assessed the risk of bias of the included studies. Meta-analysis was then performed using Stata 14.0 software. ResultsA total of 42 studies including 3 cohort studies, and 39 cross-sectional studies, with a total sample size of 193 810 participants were included. Meta-analysis showed that the risk of suicidal ideation was higher in people who had experienced interpersonal pressure than in people who had not (OR=2.11, 95%CI 1.99 to 2.23, P<0.01). Subgroup analysis showed that people in the Americas who had experienced interpersonal pressure were more strongly associated with suicidal ideation than people in other regions of the studied area. Young adults in the study who had experienced interpersonal pressure were more strongly associated with suicidal ideation than other studied age groups; People who had experienced partner pressure were more strongly associated with suicidal ideation than those who had experienced other types of interpersonal pressure. ConclusionThis study shows that people who have experienced interpersonal pressure are at greater risk of suicidal ideation, and there are certain differences among study areas, subjects and types of interpersonal pressure. Due to the limited quantity and quality of the included studies, more high-quality studies are needed to verify the above conclusion.
[Abstract]Currently, there is no high-level evidence to support the benefit of postoperative adjuvant therapy for patients with resectable esophageal squamous carcinoma. By reviewing existing studies, this article analyzes the role of postoperative adjuvant therapy in resectable esophageal squamous carcinoma from four aspects, namely, the contradiction between the needs of clinical practice and the guidelines, the evolution of postoperative adjuvant therapy, the progress of the research on high-risk factors, and the outlook for the future, and elaborates on the high-risk factors that can be used as screening for postoperative adjuvant therapy. Thus, it provides reference for individualized and precise treatment of resectable esophageal squamous carcinoma.
ObjectiveTo summarize the clinical application and research status of open wedge high tibial osteotomy (OWHTO).MethodsRelevant literature at home and abroad was reviewed, and the clinical application, effectiveness and complications, technical comparison, and surgical skills of OWHTO were summarized and analyzed.ResultsOWHTO is an effective treatment for mild to moderate medial compartment osteoarthritis due to knee varus. This method can delay the injury process of medial compartment of the knee, delay the time of total knee arthroplasty, and even avoid joint replacement surgery by adjusting the axial alignment of the lower extremity to the non-pathological lateral compartment through osteotomy and orthopedic. OWHTO has the advantages of small incision, dynamic adjustment of the axial alignment of the lower extremity, accurate correction of malformation, and rapid postoperative recovery.ConclusionWith the development of surgical instruments and techniques, OWHTO once again enter the sight of orthopedic surgeons. This technique can solve the pain symptoms of arthritis, correct the tibial varus deformity and reconstruct the axial alignment of the lower extremity, and satisfactory clinical results has been obtained.
Study of the mechanical properties of in vivo corneal materials is an important basis for further study of corneal physiological and pathological phenomena by means of finite element method. In this paper, the elastic coefficient (E) and viscous coefficient (η) of normal cornea and keratoconus under pulse pressure are calculated by using standard linear solid model with the data provided by corneal visualization scheimpflug technology. The results showed that there was a significant difference of E and η between normal cornea and keratoconus cornea (P < 0.05). Receiver operating characteristic curve analysis showed that the area under curve (AUC) for E, η and their combined indicators were 0.776, 0.895 and 0.948, respectively, which indicated that keratoconus could be predicted by E and η. The results of this study may provide a reference for the early diagnosis of keratoconus and avoid the occurrence of keratoconus after operation, so it has a certain clinical value.