Objective To investigate the influence of infarcted myocardial construction by umbilical cord blood mesenehymal stem cells（MSC） with induced to myo-derived stem cells and implanted into infarcted myocardium. Methods Thirty-six adult mongrel canines were randomly divided into MSC transplant group and control group （18 each group）. Transplant group： the umbilical cord blood MSC differented to myo-derived stem cells induced by 5-azacytidine（5-aza） were implanted into the acute myocardial infarct site via the ligated left anterior descending （LAD） artery. Control group： administer the same volume of IMDM culture medium containing 0. 02% 4,6- diamidino-2-phenylindone （DAPI）. At 2, 4, 8 weeks after implantation, the change of basic myocardial construction and the distribution of desmin were observed by using Nagar-Olsen staining and immunohistology respectively. Results With less fusing, the arrangement of gelatine fibers and elastic fibers were in order in transplant group,and they were partly fused in control group by Nagar-Olsen staining. The expression of desmin of infarcted myocardial cell in transplant group was much higher than those in control group （P〈0. 01）. No significant difference was detected in the expression of desmin in normal site of both groups （P〉0. 05）. Conclusion There is an protective effect on the basic myocardial construction in infarcted myocardium after the umbilical cord blood MSC was differented to myo-derived stem cell by induced with 5-aza in vitro and implanted into the acute myocardial infarction.
ObjectiveTo evaluate the effectiveness of the upper limb free flap for repair of severe contracture of thumb web, and one stage reconstruction of the index finger abduction. MethodsBetween March 2007 and June 2011, 16 cases of severe contracture of thumb web and index finger abduction dysfunction were treated. There were 14 males and 2 females with an average age of 29 years (range, 16-42 years). All injuries were caused by machine crush. The time between injury and admission was 6-24 months (mean, 10 months). The angle of thumb web was 10-25° (mean, 20°), and the width of thumb web was 15-24 mm (mean, 22 mm). After scar relax of the thumb web, the defect size ranged from 6 cm × 4 cm to 8 cm × 6 cm; the upper limb free flap from 7 cm × 5 cm to 9 cm × 7 cm was used to repair the defect, index finger abduction was simultaneously reconstructed by extensor indicis proprius tendon transfer. The donor site was repaired with skin grafting. ResultsAll the flaps and skin graftings survived after operation and incisions healed by first intention. Fourteen patients were followed up 6-12 months (mean, 9 months). The flap appearance was satisfactory. The two-point discrimination was 6-9 mm (mean, 7 mm) after 6 months. The angle of thumb web was 85-90° (mean, 88°). The width of thumb web was 34-52 mm (mean, 40 mm). The abduction and opposing functions of thumb and abduction function of index finger were both recovered. Conclusion A combination of the upper limb free flap for severe contracture of thumb web and one stage reconstruction of the index finger abduction for index finger abduction dysfunction can achieve good results in function and appearance.
Objective To discuss applied anatomy, biomechanics and surgical procedures of long peroneal muscles tendon transposition in repair of occlusive achilles tendon rupture. Methods The blood supply and the morphology of long peroneal muscles tendon were observed in the lower extremity of 50 sides adult specimens and the mechanical tests which stretch load on the tendon were carried out. The methods were designed on the basis of the anatomical characteristics and morphology. Ten patients suffering occlusive Achilles tendon rupture were treated by using long peroneal muscles tendon transposition from March 2001 to July 2004. Among 10 patients, there were 7 males and 3females, aging 32 to 54 years including 6 cases of jump injury, 2 cases of bruise, 1 case of step vacancy and 1 case of spontaneity injury. The interval between injury and surgery was 6 hours to 7 days in 7 fresh rupture and 21 days to 3 months in 3 old rupture. All cases belonged to occlusive Achilles tendon rupture(8 cases of complete rupture and 2 cases of incomplete rupture). Results The origin of long peroneal muscles was proximal tibia and fibular head, the end of them was base of first metatarsal bones and medial cuboid. The length of tendon was 13.5±2.5 cm. The width of origin tendon was 0.9±0.2 cm and the thickness was 0.3±0.1 cm; the width on apex of lateral malleolus was 0.7±0.1 cm and the thickness was 0.4±0.1 cm, the width on head of cuboid was 0.7±0.1 cm and the thickness was 0.3±0.1 cm. The long peroneal muscles tendon had abundant blood supply. The results of mechanical test showed that the biggest load was 2 292.4±617.3 Non tendon calcaneus, 1 020.4±175.4 N on long peroneal muscles tendon, 752.0±165.4 N on peroneus brevis tendon and 938.2±216.7 N on tibialis posteriortendon. Tencases of occlusive Achilles tendon rupture achieved healing by first intention and were followed up 1824 months. No Achilles tendon rerupture, necrosis of skin or other complications occurred. According to AmerLindholm criterion forcurative results, the results were excellent in 7 cases and good in 3 cases and the excellent and good rate was 100%. Conclusion The long peroneal muscles tendon transposition is a perfect and simple way to repair occlusive Achilles tendon rupture.
Objective To investigate the application value of three-dimensional (3-D) printing technology in the operation of distal tibia fracture involving epiphyseal plate injury for teenagers. Methods The retrospective analysis was conducted on the clinical data of 16 cases of children patients with distal tibia fracture involving epiphyseal plate injury undergoing the operation by using of 3-D printing technology between January 2014 and December 2015. There were 12 males and 4 females with an age of 9-14 years (mean, 12.8 years). The causes of injury included traffic accident injury in 9 cases, heavy pound injury in 3 cases, and sport injury in 4 cases. The time from injury to operation was 3-92 hours (mean, 25.8 hours). According to Salter-Harris typing standard, the typing for epiphyseal injury was classified as type Ⅱ in 11 cases, type Ⅲ in 4 cases, and type Ⅳ in 1 case. The thin slice CT scan on the affected limb was performed before operation, and the Mimics14.0 medical software was applied for the design and the 1∶1 fracture model was printed by the 3-D printer; the stimulation of operative reduction was made in the fracture model, and bone plate, Kirschner wire, and hollow screw with the appropriate size were chosen, then the complete operative approach and method were designed and the internal fixator regimen was chosen, then the practical operation was performed based on the preoperative design regimen. Results The operation time was 40-68 minutes (mean, 59.1 minutes); the intraoperative blood loss was 5-102 mL (mean, 35 mL); the intraoperative fluoroscopy times was 2-6 times (mean, 2.8 times). All the patiens were followed up 12-24 months (mean, 15 months). The fracture of 15 cases reached anatomic reduction, and 1 cases had no anatomic reduction with the displaced end less than 1 mm. All the fractures reached bony union with the healing time of 2-4 months (mean, 2.6 months). There was no deep vein thrombosis, premature epiphyseal closure and oblique, or uneven ankle surface occurred, and there was no complication such as osteomyelitis, varus or valgus of ankle joint, joint stiffness, traumatic arthritis. Helfet scores of ankle function were measured at 12 months after operation, the results were excellent in 15 cases and good in 1 case. The angulation of introversion and extroversion for the affected limb was (6.56±2.48)°, and the growth length was (4.44±2.31) mm, and there was no significant difference (t=0.086, P=0.932; t=0.392, P=0.697) when compared with the uninjured side [(6.50±1.51)°, (4.69±1.08) mm]. Conclusion As the assistive technology, 3-D printing technology has a certain clinical application value in improving the effectiveness of distal tibia fracture involving epiphyseal plate injury.
ObjectiveTo explore the clinical characteristics, diagnosis and treatment of thoracic inflammatory myofibroblastic tumor.MethodsThe clinical data, pathological features, treatment and prognosis from 10 patients with thoracic inflammatory myofibroblastic tumor confirmed by pathology were analysed retrospectively from April 2012 to April 2019 at Jiangsu Province Hospital (The First Affiliated Hospital of Nanjing Medical University).ResultsTen participants including six males and four females with a mean age of 37.9 years old. Lesions were detected by physical examination in five patients, cough, chest pain and hemoptysis were the common symptoms. A total of 10 lesions including six in the right lung, three in the left lung and one in the mediastinum. Nine patients were treated with surgery, and one patient received high-frequency electrocautery though rigid bronchoscopy under general anesthesia. All the patients were confirmed by immunohistochemistry, positive rate of smooth muscle actin was 70%, positive rate of anaplastic lymphoma kinase was 70%. The mean follow-up time was 35.9 months, and one patient relapsed the other nine patients were cured.ConclusionsInflammatory myofibroblastic tumor is potentially malignant or low malignant, the clinical manifestations and imaging findings are not specific, once confirmed by pathology, radical surgery is the first choice. For the lesion limited to the airway, interventional therapy could be the choice, but close follow up is needed.