west china medical publishers
Author
  • Title
  • Author
  • Keyword
  • Abstract
Advance search
Advance search

Search

find Author "TANG Kanglai" 28 results
  • Research progress of treatment for massive rotator cuff tears

    ObjectiveTo review the research progress of treatment for massive rotator cuff tears. MethodsThe domestic and foreign literature about the treatment of massive rotator cuff tears was reviewed. The methods and effectiveness were extensively summarized.ResultsThe treatment of massive rotator cuff tears still needs long-term research to promote its continuous improvement. The main goal of treatment is to relieve the symptoms and improve the shoulder joint function. With the development of arthroscopic technique, arthroscopic repair of rotator cuff tears has become a mature surgical protocol. Among these techniques, superior capsule reconstruction and patch augmentation for massive rotator cuff tears acquire more attention in recent years. As for rotator cuff arthropathy, reverse shoulder arthroplasty is considered to be a final choice. ConclusionSurgical treatment is the main choice for massive rotator cuff tears. Patients’ age and muscle condition should be taken into consideration to decide the surgical technique.

    Release date:2021-01-29 03:56 Export PDF Favorites Scan
  • Z-OSTEOTOMY OF DISTAL FIBULA TO CORRECT WIDENED ANKLE MORTICE AFTER FRACTURE

    Objective To analyse the cl inical outcomes of the Z-osteotomy of the distal fibula to correct widened mortice of the ankle after fracture. Methods Between September 2009 and February 2011, 5 patients (5 feet) with widened ankle mortice after fracture underwent Z-osteotomy. There were 4 males and 1 female, aged from 23 to 58 years (mean, 38 years). At 3 months after operation of internal fixation when function exercises were done, patients got pains. The interval between trauma and operation ranged from 5 to 36 months (mean, 13.2 months). Lateral pressure test showed positive in2 cases and negative in 3 cases. American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot score was 50.2 ±17.3. Results Primary healing of incision was achieved in all cases. Five patients were followed up 9 to 24 months (mean, 15.6 months). Mild to moderate swelling of the affected limb and anterolateral skin numbness of the i psilateral dorsal foot occurred, and gradually improved. The cl inical exam and radiology showed bone union at 12-15 weeks (mean, 13.5 weeks). Postoperative range of motion of ankle had no significant improvement. AOFAS ankle-hindfoot scores were 76.8 ± 11.2 at 6 months after operation, and 85.4 ± 3.2 at last follow-up, showing significant differences when compared with preoperative score (P lt; 0.05). Conclusion Shortened fibula is the main cause of widened ankle mortice after fracture; Z-osteotomy can effectively reduce the width of the ankle mortice, increase the stabil ity of ankle joint, and decrease the complication rate.

    Release date:2016-08-31 04:23 Export PDF Favorites Scan
  • 3-D ADJUSTABLE DESIGN OF HUMERAL PROSTHESIS

    【Abstract】 Objective To study the shoulder anatomy characteristics of the Chinese people and to design a newkind of humeral prosthesis, which could real ize the adjustment in three-dimensional space and be adjusted repeatedly, based on Chinese humeral anatomy characteristics. Methods A double-gear structure as a rotating part was adopted to design the structure of this new kind humeral prosthesis. Results The humeral prosthesis could satisfy both the needs of Chinese individual shoulder characteristics and the Westerners’ demands. Conclusion A novel concept of shoulder prosthesis design with a b appl ication value in design and development of the new prosthesis is proposed.

    Release date:2016-09-01 09:12 Export PDF Favorites Scan
  • Research progress of indication and treatment of graft in shoulder superior capsular reconstruction for rotator cuff tear

    ObjectiveTo review the research progress of indication and treatment of graft in shoulder superior capsular reconstruction (SCR) for rotator cuff tear (RCT).MethodsThe literature related to shoulder SCR in recent years was extensively reviewed, and the anatomy, biomechanics, surgical indications, and treatment of graft in SCR were summarized.ResultsSuperior capsule plays a role as a functional complex with rotator cuff, ligament, and whole capsule. SCR can effectively restore the superior stability of the shoulder. The indications of SCR include the irreparable massive RCT, massive RCT combined with pseudoparalysis shoulder, medium/large RCT with severe degenerative rotator cuff tissue, and dual-layer RCT. In order to achieve a better healing of tendon-bone in graft and decrease the rate of long-term graft retearing, it is essential to select an appropriate thickness graft, fix the graft in right intensity, and get a better capsular continuity.ConclusionThe technique of SCR advanced to SCR for reinforcement and it is indicated from substantial massive RCT to severe degeneration of rotator cuff tissue. Graft treatment is the key step for a successful SCR.

    Release date:2021-02-24 05:33 Export PDF Favorites Scan
  • Rebalancing theory of shoulder stability mechanism for the diseases related to the shoulder instability and dysfunction of motion

    Objective To introduce a new theory of shoulder stability mechanism, rebalancing theory, and clinical application of this new theory for the shoulder instability and dysfunction of motion. Methods Through extensive review of the literature related to shoulder instability and dysfunction of the motion in recent years, combined with our clinical practice experience, the internal relation between passive stability mechanism and dynamic stability mechanism were summarized. Results Rebalancing theory of shoulder stability mechanism is addressed, namely, when the shoulder stability mechanism is destructive, the stability of the shoulder can be restored by the rebalance between dynamic stability mechanism and passive stability mechanism. When dynamic stability is out of balance, dynamic stability can be restored by rebalancing the different parts of dynamic stability mechanism or to strengthen the passive stability mechanism. When passive stability mechanism is out of balance, passive stability can be restored by rebalancing the soft tissue and bone of the shoulder. ConclusionRebalancing theory of shoulder stability mechanism could make a understanding the occurrence, development, and prognosis of shoulder instability and dysfunction from a comprehensive and dynamic view and guide the treatment effectively.

    Release date: Export PDF Favorites Scan
  • CORACOPLASTY WITH MINI-INCISION FOR TREATMENT OF SUBCORACOID IMPINGEMENT SYNDROME

    Objective To investigate the method and effectiveness of coracoplasty with mini-incision for subcoracoid impingement syndrome. Methods Between May 2006 and September 2011, 4 patients with subcoracoid impingement syndrome were treated, including 3 cases of congenital dysplasia of the coracoid process and 1 case of anterior glenohumeral instability. There were 3 males and 1 female with an average age of 36 years (range, 20-56 years). The disease duration was 6-22 months (mean, 11.2 months). The patients had a history of chronic pain and click of the anterior should, which was aggravated in adduction, internal rotation, and flexion. The results of the coracoid impingement test were positive by Neer and Hawkins-Kennedy impingement sign. The axial CT in adduction position showed that the coracohumeral interval decreased and coracoid index increased. The 2 cm lateral coracoid incision was made and the 0.5-1.5 cm coracoid neck was revealed and cut by osteotomy. The coracoplasty was performed by amputating the conjoined tendon insertion of the short head of the biceps and the coracobrachialis muscle and suturing to proximal coracoid osteotomy surface. Shoulder was fixed with the external braces for 6 weeks. Results Healing of incision by first intention was observed in all cases without any complication. All the 4 patients were followed up from 8 months to 5 years. At last follow-up, pain and click disappeared. The mean visual analogue scale (VAS), University of California at Los Angeles (UCLA), Constant, and simple shoulder test (SST) scores were significantly improved from 7.75, 10.25, 65.50, and 9.75 at preoperation to 0.25, 34.25, 91.25, and 0.25 at last follow-up respectively. The axial CT in adduction position and MRI showed that long coracoid process was removed; the coracohumeral interval was increased to 13.38 mm from 4.16 mm at preoperation; and the coracoid index was decreased to 0.28 mm from 13.08 mm at preoperation. Conclusion Coracoplasty with mini-incision is an effective method to relieve clinical symptoms of subcoracoid impingement, which has less complications and faster recovery.

    Release date:2016-08-31 04:22 Export PDF Favorites Scan
  • EFFECTS OF EXOGENOUS PROSTAGLANDIN E2 ON COLLAGEN CONTENT OF Achilles TENDON OF RABBITS IN VIVO

    【Abstract】 Objective Prostaglandin E2 (PGE2) production increases in human tendon fibroblasts after the tendon injuries and repetitive mechanical loading in vitro. To analyze the relations between PGE2 and tendinopathy by observing the changes of collagen content and proportion after the Achilles tendon of rabbits is repeatedly exposed to PGE2. Methods Twenty-four Japanese rabbits (aged 3-4 months, weighing 2.0-2.5 kg, and male or female) were equally randomized into 2 groups according to injection dose of PGE2: low dose group (50 ng) and high dose group (500 ng). Corresponding PGE2 (0.2 mL) was injected into the middle segment of the Achilles tendon of hindlimb, the same dose saline into the same site of the other side as controls once a week for 4 weeks or 8 weeks. The Achilles tendons were harvested at 4 and 8 weeks after injection. HE staining was used to observe the cell structure and matrix, and picric acid-sirius red staining to observe the distribution and types of collagen fibers, and transmission electron microscopy was used to measure the density of the unit area and diameter of collagen fibers. Results HE staining showed that collagen structural damage was observed in low dose and high dose groups. Picric acid-sirius red staining showed that the content of type I collagen significantly decreased while the content of type III collagen significantly increased in experimental side of 2 groups at 4 and 8 weeks after injection when compared with control sides (P lt; 0.05). The content of type I collagen was significantly lower and the content of type III collagen and ratio of type III to type I were significantly higher in high dose group than in low dose group (P lt; 0.05). Transmission electron microscopy showed that the collagen fibers density of unit area was significantly lower and the diameter was significantly smaller in high dose and low dose groups than in the controls (P lt; 0.05), and in high dose group than in low dose group (P lt; 0.05). Conclusion Repeat exposure of the Achilles tendon of rabbit to PGE2 can cause the decrease of type I collagen, the increase of type III collagen, the reverse ratio of type I to type III, reduced unit density of collagen fibers, and thinner collagen fibers diameter, which is related with tendinopathy.

    Release date:2016-08-31 04:22 Export PDF Favorites Scan
  • MEASUREMENT AND ANALYSIS OF THREE-DIMENSIONAL ANATOMY OF PROXIMAL HUMERUS

    Objective To investigate the key parameters of three-dimensional anatomy of the proximal humerus and compare the differences between male and female, and between left and right sides in Chinese by volume rendering technique with multi-slice spiral CT (MSCT) so as to provide a reference for a new prosthesis of the proximal humerus which can adjust to the anatomical characteristics of Chinese. Methods A total of 100 healthy volunteers were collected from Chongqing of China, including 59 males and 41 females with an average age of 40.4 years (range, 21-57 years). The humeral retroversion angle (RA), neck-shaft angle (NSA), medial offset (MO), and posterior offset (PO) were measured by volume rendering technique with MSCT. The average values were compared between male and female and between left and right sides, the correlation of these parameters was also analysed. Results In 100 volunteers (200 sides), the RA was (19.9 ± 10.6)°, the NSA was (134.7 ± 3.8)°, the MO was (4.0 ± 1.1) mm, and the PO was (2.6 ± 1.3) mm. There were significant differences in RA and MO between left and right sides (Plt; 0.05); there was no significant difference in NSA and PO between left and right sides (P gt; 0.05). The PO and RA of both sides in male were significantly larger than those in female (P lt; 0.05); the NSA and MO in male were similar to those in female (P gt;0.05). PO was correlated positively with RA (r=0.617, P=0.000); MO was not correlated with NSA (r= —0.124, P=0.081). Conclusion Because of significant side differences in RA and MO, and significant gender differences in RA and PO, the differences should be considered in the design of new proximal humeral prosthesis and proximal humerus reconstruction.

    Release date:2016-08-31 05:45 Export PDF Favorites Scan
  • MEASUREMENT AND ANALYSIS OF GLENOID BONY ANATOMY BY USE OF THREE-DIMENSIONAL COMPUTED TOMOGRAPHY

    Objective To investigate and analyze the three-dimensional anatomic structure of glenoid bone in some Chinese people so as to provide the accurate anatomic data to design the new prosthesis of glenoid bone for Chinese people. Methods A total of 90 volunteers with two healthy shoulders (52 males and 38 females, aging 19-60 years with an average of 39.6 years) were selected. Five parameters were measured by use of three-dimensional computed tomography, volumerendering technique (VRT) and multiplanar reformation (MPR), including the maximum antero-posterior width (MAPW),antero-posterior radius of curvature (APROC), maximum supero-inferior height (MSIH), supero-inferior radius of curvature(SIROC) and version angle (VA) of glenoid. All parameters were measured two times, and the average values were analysed by SPSS13.0. The level of significance was set at P lt; 0.05. Results The average MAPW was (2.51 ± 0.32) cm, the average APROC was (5.50 ± 1.21) cm, the average MSIH was (3.45 ± 0.29) cm, the average SIROC was (3.98 ± 0.55) cm, and the average VA was (— 0.03 ± 4.66)°. There were no significant differences (P gt; 0.05) in MAPW, APROC, MSIH, SIROC and VA between two sides. There were significant differences (P lt; 0.05) in MAPW, MSIH, SIROC and VA, and no significant difference (P gt; 0.05) in APROC between female and male. MAPW was correlated with APROC, MAPW was correlated with MSIH, APROC was correlated with SIROC, and the correlation coefficient was 0.298, 0.495 and 0.262, respectively. Conclusion There are no significant differences in MAPW, APROC, MSIH, SIROC and VA of glenoid between two sides. There are sexual significant differences in MAPW, MSIH, SIROC and VA. The data and its statistical results may serve as guidel ines for the design of the glenoid component.

    Release date:2016-09-01 09:07 Export PDF Favorites Scan
  • Effects of different mechanical stretch conditions on differentiation of rat tendon stem cells

    Objective To investigate the effects of different mechanical stretch conditions on the differentiation of rat tendon stem cells (TSCs), to find the best uniaxial cyclic stretching for TSCs tenogenic differentiation, osteogenic differentiation, and adipogenic differentiation. Methods TSCs were isolated from the Achilles tendons of 8-week-old male Sprague Dawley rats by enzymatic digestion method and cultured. The TSCs at passage 3 were randomly divided into 5 groups: group A (stretch strength of 4% and frequency of 1 Hz), group B (stretch strength of 4% and frequency of 2 Hz), group C (stretch strength of 8% and frequency of 1 Hz), group D (stretch strength of 8% and frequency of 2 Hz), and group E (static culture). At 12, 24, and 48 hours after mechanical stretch, the mRNA expressions of the tenogenic differentiation related genes [Scleraxis (SCX) and Tenascin C (TNC)], the osteogenic differentiation related genes [runt related transcription factor 2 (RUNX2) and distal-less homeobox 5 (DLX5)], and the adipogenic differentiation related genes [CCAAT-enhancer-binding protein-α (CEBPα) and lipoprteinlipase (LPL)] were detected by real-time fluorescent quantitative PCR and the protein expressions of TNC, CEBPα, and RUNX2 were detected by Western blot. Results The mRNA expressions of SCX and TNC in group B were significantly higher than those in groups A, C, D, and E at 24 hours after mechanical stretch (P<0.05). The mRNA expressions of CEBPα and LPL in group D were significantly higher than those in groups A, B, C, and E at 48 hours after mechanical stretch (P<0.05). The mRNA expressions of RUNX2 and DLX5 in group C were significantly higher than those in groups A, B, D, and E at 24 hours after mechanical stretch (P<0.05). Western blot detection showed that higher protein expression of TNC in group B than group E at each time point after mechanical stretch (P<0.05), and the protein expression of CEBPα was significantly inhibited when compared with group E at 24 hours after mechanical stretch (P<0.05). At 24 hours after mechanical stretch, the protein expression of RUNX2 in group C was significantly higher than that in group E (P<0.05); and the protein expression of TNC was significantly lower than that in group E at 24 and 48 hours after mechanical stretch (P<0.05). At 48 hours after mechanical stretch, the protein expression of CEBPα was significantly increased and the protein expression of TNC was significantly decreased in group D when compared with group E (P<0.05), but no significant difference was found in the protein expression of RUNX2 between groups D and E (P>0.05). Conclusion The mechanical strain could promote differentiation of TSCs, and different parameter of stretch will lead to different differentiation. The best stretch condition for tenogenic differentiation is 4% strength and 2 Hz frequency for 24 hours; the best stretch condition for osteogenic differentiation is 8% strength and 1 Hz frequency for 24 hours; and the best stretch condition for adipogenic differentiation is 8% strength and 2 Hz frequency for 48 hours.

    Release date:2017-04-12 11:26 Export PDF Favorites Scan
3 pages Previous 1 2 3 Next

Format

Content