west china medical publishers
Keyword
  • Title
  • Author
  • Keyword
  • Abstract
Advance search
Advance search

Search

find Keyword "Varus" 8 results
  • TECHNIQUES OF SOFT TISSUE BALANCE IN TOTAL KNEE ARTHROPLASTY OF VARUSKNEE

    Objective To analyze formation of the varus angle of the knee dueto osteoarthritis and to explore techniques of the soft tissue balance in the total knee arthroplasty(TKA). Methods One hundred patients with145 varus knees (18 males, 25 varus knees; 82 females, 120 varus knees) underwent TKA from January 1999 to December 2003. Their ages averaged 62.4 years (range, 45.80 years), and their HSS(hospital of special surgery)scores were 38.0±3.2 points. Before operation,all the patients were measured in the alignment of the lower extremity, accurate bonecutting was performed, and their static alignment was achieved. Then, the soft tissue release was made. The release performance consisted of 3 steps: release before the bone-cutting, release during the bone-cutting, and release after the bonecutting. Release of themedial ligament and capsule, elimination of the osteophytes, and release of thelateral patellar retinaculum were more important. Results The varus angles in these patients were 9.2±3.1° before operation. Among them,the varus angles caused by the soft tissue imbalance accounted for 53.2%,and caused by the bone structure accounted for 46.8%; and the latter caused by thetibia varus, 22.8%, and by the tibia plateau destruction, 24.0%. There was nosignificant difference between the varus angles caused by the soft tissue imbalance and the varus angles caused by the bone structure deformity (P>0.05). According to the postoperative imaging studies, the correction degree for the varus angles by the bone-cutting was 4.3°, which represented 27.9% of the total corrected angles, and the correction degree for the varus angles corrected by the soft tissue balance was 10.7°, which represented 72.1% of the total corrected angles. The HSS scores were 87.0±4.5 points after operation, and the difference between preoperation and postoperation was significant. Conclusion The varus knee due to osteoarthritis results from the varus angle in the bone structure and the angles caused by the imbalance of the collateral ligaments and the soft tissues around the knee. The latter causative factor is more important in the formation of the varus knee and should only be corrected through the soft tissue release. The more important part to be released isthe attachments of the medial ligament and the posterior capsule. The release performance should be followed by the principles, i.e., step by step, tests at all the time, and avoidance of the excessive release.

    Release date:2016-09-01 09:26 Export PDF Favorites Scan
  • MEDIAL WEDGED PROXIMAL TIBIAL OSTEOTOMY FOR TREATING OSTEOARTHRITIS OF KNEE

    Objective To assess the efficacy of medial wedged proximal tibial osteotomy for treating knee osteoarthritis with varus deformity. Methods From July 1996 to September 1999, 19 patients with knee osteoarthritis accompanied by varus deformity were treated by medial wedged proximal tibial osteotomy combined with internal fixation. Full-length anteriorposterior radiographs were taken preoperatively, 8 weeks and 2 years postoperatively. The parameters including the femorotibial angle, the tibial angle, the femoral angle, the femoral condyletibial plateau angle, and the medial joint space, were measured from these radiographs. The function of knee was evaluated according to the 100point rating scale standard of knee.Results Themean postoperative score had been significantly improved from 48.6±16.6 pointsto 81.7±14.8 points after 2 years of operation. The medial joint spacehad been increased from 2.2±1.6mm to 4.9±1.5 mm and the femoral condyle-tibial anglehad been decreased from 7.4°±3.1° to 1.7°± 3.1°. There were complications in 3 cases: 2 casesof superficial wound infections and 1 case of intraarticular fracture. There were no delayed union and recurrence of varus deformity. Conclusion Medial wedged proximal tibial osteotomy combined with internal fixation provides an efficacious approach to treat knee osteoarthritis with varus deformity.

    Release date:2016-09-01 09:35 Export PDF Favorites Scan
  • EFFECTIVENESS OF HIGH TIBIAL OSTEOTOMY ASSISTED BY THREE-DIMENSIONAL PRINTING TECHNOLOGY FOR CORRECTION OF VARUS KNEE WITH OSTEOARTHRITIS

    ObjectiveTo evaluate the effectiveness of high tibial osteotomy (HTO) assisted by three-dimensional (3-D) printing technology for correction of varus knee with osteoarthritis. MethodBetween January 2014 and June 2015, 16 patients (20 knees) with varus knee and osteoarthritis underwent HTO assisted by 3-D printing technology; a locking compression plate was used for internal fixation after HTO. There were 6 males and 10 females, aged 30-60 years (mean, 45.5 years). The disease duration was 1-10 years (mean, 6.2 years). The unilateral knee was involved in 12 cases and bilateral knees in 4 cases. According to Koshino's staging system, 3 knees were classified as stage I, 7 knees as stage Ⅱ, 8 knees as stage Ⅲ, and 2 knees as stage IV. Preoperative Hospital for Special Surgery (HSS) knee score was 63.8±2.2; the femorotibial angle was (184.8±2.9) °; and Insall-Salvati index was 1.03±0.13. ResultsAll the wounds healed primarily, and no complication of infection, osteofacial compartment syndrom, or deep vein thrombosis was observed. All patients were followed up 6-18 months (mean, 12.6 months). Personal paralysis was observed in 1 case (1 knee), and was cured after expectant treatment. Bone union time was 2.7-3.4 months (mean, 2.9 months). At 6 months after operation, the femorotibial angle was (173.8±2.0) °, showing significant difference when compared with preoperative one (t=11.70, P=0.00) ; Insall-Salvati index was 1.04±0.12, showing no significant difference when compared with preoperative one (t=-0.20, P=0.85) ; and HSS knee score was significantly increased to 88.9±3.1 (t=-25.44, P=0.00) . At last follow-up, the results were excellent in 13 knees, good in 6 knees, fair in 1 knee, and the excellent and good rate was 95%. Conclusions3-D printing cutting block can greatly improve the accuracy of HTO, avoid repeated X-ray and multiple osteotomy, shorten the operation time, and ensure better effectiveness for correction of varus knee with osteoarthritis.

    Release date: Export PDF Favorites Scan
  • PROXIMAL FIBULAR OSTEOTOMY COMBINED WITH ARTHROSCOPIC DEBRIDEMENT FOR TREATING MEDIAL KNEE OSTEOARTHRITIS WITH VARUS

    ObjectiveTo evaluate the effectiveness of proximal fibular osteotomy combined with arthroscopic debridement in the treatment of medial knee osteoarthritis with varus. MethodsBetween December 2013 and June 2015, 61 patients with medial knee osteoarthritis with varus were treated by arthroscopic debridment in 32 cases (group A) and by proximal fibular osteotomy combined with arthroscopic debridement in 29 cases (group B). No significant difference was found in gender, age, side, disease duration, OA stage, visual analogue scale (VAS) score, and knee society score (KSS) between 2 groups (P > 0.05). The clinical outcome was evaluated by VAS score and KSS score at 1 week, 3 months, and 12 months after operation. ResultsThe patients in 2 groups were followed up 12 months. All incisions healed by first intention. There was no significant difference in complication incidence between groups A and B (0 vs. 3.4%; χ2=0.723, P=0.432). The VAS scores were significantly decreased at 1 week, 3 months, and 12 months after operation when compared with preoperative score in 2 groups (P < 0.05). The VAS score of group A was significantly lower than that of group B at 1 week after operation (P < 0.05), but the VAS score of group A was significantly higher than that of group B at 3 months, and 12 months after operation (P < 0.05). The knee function was obviously improved in 2 groups, and the KSS scores at 1 week, 3 months and 12 months after operation were significantly better than preoperative score (P < 0.05). The KSS score of group A was significantly lower than that of group B at 3 months, and 12 months after operation (P < 0.05). ConclusionProximal fibular osteotomy combined with arthroscopic debridement can treat knee malalignment and disease in knee, it is an effective and safe method to treat the medial knee osteoarthritis with varus.

    Release date:2016-11-14 11:23 Export PDF Favorites Scan
  • Effectiveness of medial open wedge high tibial osteotomy combined with posterior slope angle of tibial plateau correction in treatment of osteoarthritis of limited flexion knee with varus deformity

    ObjectiveTo explore the short-term effectiveness of medial open wedge high tibial osteotomy (OWHTO) combined with posterior slope angle of tibial plateau correction to treat the osteoarthritis of limited flexion knee with varus deformity.MethodsThe data of 18 cases (18 knee) with osteoarthritis of limited flexion knee with varus deformity between January 2014 and July 2016 were analyzed retrospectively. There were 6 males and 12 females with an average age of 54.9 years (range, 48-64 years). There were 8 cases of left knee and 10 cases of right knee. The varus of knee ranged from 7.45 to 15.52° (mean, 10.63°). According to Kellgren-Lawrence grading standard, there were 4 cases of grade Ⅱ and 14 of grade Ⅲ. OWHTO was used to adjust the varus deformity, and the posterior slope angle of tibial plateau was adjusted to solve the limited flexion.ResultsThe thickness of osteotomy was 10-19 mm (mean, 14.91 mm). The operation time was 1.2-2.0 hours (mean, 1.4 hours). All incisions healed by first intension. All patients were followed up 1.0-2.5 years, with an average of 1.5 years. At last follow-up, the range of knee flexion and Lysholm score, Hospital for Special Surgery (HSS) score, and International Knee Documentation Committee (IKDC) score were significantly higher than preoperative ones, showing significant differences (P<0.05). X-ray films showed that the osteotomy healed at 3- 7 months (mean, 3.6 months) after operation. At last follow-up, the limb alignment by the relative position of tibial plateau and the posterior slope angle of tibial plateau were significantly improved, showing significant differences when compared with preoperative ones (P<0.05).ConclusionThe OWHTO combined with posterior slope angle of tibial plateau correction can significantly improve the range of flexion and functional score in short-term.

    Release date:2018-02-07 03:21 Export PDF Favorites Scan
  • Establishment of finite element model of varus-type ankle arthritis and biomechanical analysis of different correction models for tibial anterior surface angle

    Objective To establish the finite element model of varus-type ankle arthritis and to implement the finite element mechanical analysis of different correction models for tibial anterior surface angle (TAS) in supramalleolar osteotomy. Methods A female patient with left varus-type ankle arthritis (Takakura stage Ⅱ, TAS 78°) was taken as the study object. Based on the CT data, the three-dimensional model of varus-type ankle arthritis (TAS 78°) and different TAS correction models [normal (TAS 89°), 5° valgus (TAS 94°), and 10° valgus (TAS 99°)] were created by software Mimics 21.0, Geomagic Wrap 2021, Solidworks 2017, and Workbench 17.0. The 290 N vertical downward force was applied to the upper surface of the tibia and 60 N vertical downward force to the upper surface of the fibula. Von Mises stress distribution and stress peak were calculated. Results The finite element model of normal TAS was basically consistent with biomechanics of the foot. According to biomechanical analysis, the maximum stress of the varus model appeared in the medial tibiotalar joint surface and the medial part of the top tibiotalar joint surface. The stress distribution of talofibular joint surface and the lateral part of the top tibiotalar joint surface were uniform. In the normal model, the stress distributions of the talofibular joint surface and the tibiotalar joint surface were uniform, and no obvious stress concentration was observed. The maximum stress in the 5° valgus model appeared at the posterior part of the talofibular joint surface and the lateral part of the top tibiotalar joint surface. The stress distribution of medial tibiotalar joint surface was uniform. The maximum stress of the 10° valgus model appeared at the posterior part of the talofibular joint surface and the lateral part of the top tibiotalar joint surface. The stress on the medial tibiotalar joint surface increased. Conclusion With the increase of valgus, the stress of ankle joint gradually shift outwards, and the stress concentration tends to appear. There was no obvious obstruction of fibula with 10° TAS correction. However, when TAS correction exceeds 10° and continues to increase, the obstruction effect of fibula becomes increasingly significant.

    Release date: Export PDF Favorites Scan
  • Early effectiveness of a new minimally invasive plate in treatment of varus-type ankle arthritis

    Objective To evaluate the early effectiveness of a new minimally invasive plate in the treatment of varus-type ankle arthritis. Methods A clinical data of 15 patients with varus-type ankle arthritis who met the selection criteria between March 2021 and October 2021 were retrospectively analyzed. All the patients were treated with medial open-wedge supramalleolar osteotomy and fibular osteotomy. The osteotomies were fixed with the new minimally invasive plate. There were 7 males and 8 females with an average age of 49.8 years (range, 16-71 years). The causes of ankle arthritis included post-fracture deformity in 1 case, sprain in 8 cases, and acquired clubfoot in 1 case; and 5 cases were without obvious factors. The disease duration ranged from 1 to 12 years, with an average of 4.1 years. Comparisons were made between pre-operation and the last follow-up in the Takakura staging, the American Orthopedic Foot and Ankle Society (AOFAS) ankle-hindfoot score, foot function index (FFI), visual analogue scale (VAS) score, tibial anterior surface angle (TAS), tibial lateral surface angle (TLS), and talar tilt (TT). Results All incisions healed by first intention. All patients were followed up 7-18 months (mean, 12.8 months). At last follow-up, the AOFAS ankle-hindfoot score, FFI, VAS score, and Takakura staging significantly improved when compared with the preoperative ones (P<0.05). X-ray films showed that the osteotomy healed at 3 months after operation. At last follow-up, TAS significantly increased and TT decreased when compared with the preoperative ones (P<0.05), and the difference in TLS between pre- and post-operation was not significant (P>0.05). Complications included 1 case of intraoperative screw breakage and 2 cases of nerve injury of the affected foot. None of the patients complained of significant discomfort at the plate placement during follow-up, and no loosening of the internal fixator occurred. Eleven patients were very satisfied with the effeectiveness, while 4 were relatively satisfied. Conclusion The new minimally invasive plate for the varus-type ankle arthritis has good early effectiveness in relieving ankle pain, correcting deformity, improving limb alignment and ankle function, and reducing the incidence of postoperative incisional complications.

    Release date: Export PDF Favorites Scan
  • Effect of different degrees of primary varus knee on short-term effectiveness of anterior cruciate ligament reconstruction

    Objective To investigate whether different degrees of primary varus knee affect joint function and stability in patients undergoing anterior cruciate ligament (ACL) reconstruction. Methods A clinical data of 160 patients with primary varus knee, who were admitted between January 2020 and December 2021 and met the selection criteria, was retrospectively analyzed. All patients underwent primary ACL reconstruction using autologous single-bundle hamstring tendon. Patients were divided into three groups based on the hip-knee-ankle angle (HKA): group A (64 patients with HKA 0°-3°), group B (55 patients with HKA 3°-6°), and group C (41 patients with HKA 6°-9°). Except for the significant difference in HKA among the three groups (P<0.05), baseline data such as age, gender, affected side, body mass index, interval between injury and operation, Kellgren-Lawrence grading, posterior tibial slope, proportion of combined meniscal injuries, Tegner score, Lysholm score, and International Knee Documentation Committee (IKDC) objective score, anterior drawer test, Lachman test, pivot shift test, and the results of KT1000 (side-to-side difference, SSD) showed no significant difference (P>0.05). At last follow-up, joint stability was assessed through the anterior drawer test, Lachman test, pivot shift test, and SSD; joint function was evaluated using the Tegner score, Lysholm score, and IKDC objective score. Results All incisions in the three groups healed by first intention after operation. All patients were followed up 24-31 months, with an average of 26 months; there was no significant difference in the follow-up time among the three groups (Z=0.675, P=0.714). At last follow-up, the knee stability and functional assessment indicators in each group significantly improved when compared to preoperative ones (P<0.05); there was no significant difference among the three groups (P>0.05) in terms of the anterior drawer test, Lachman test, pivot shift test, IKDC objective scores, and the changes of the Lysholm scores and Tegner scores. The Kellgren-Lawrence grading and HKA at last follow-up were consistent with preoperative results in the three groups. ConclusionVarying degrees of primary varus knee do not affect early knee joint stability and functional recovery after ACL reconstruction, and there is no significant difference in effectiveness between different degrees of varus knee.

    Release date: Export PDF Favorites Scan
1 pages Previous 1 Next

Format

Content