Objective To evaluate the cl inical outcomes and values of anterior segmental decompression and double-plate fixation (ASDDF) for treatment of ski p cervical spondylotic myelopathy (SCSM). Methods Between June 2005 and June 2008, 17 patients with SCSM were treated with ASDDF. There were 10 males and 7 females with an average age of 58.8 years (range, 41-74 years) and an average disease duration of 9.7 months (range, 6-39 months). According to JapaneseOrthopaedic Association (JOA) score system, 2 patients were rated as extreme severe condition, 7 as severe, 7 as moderate, and 1 as mild. MRI images showed 42 affected cervical disc levels, including 26 disc levels with high-intensity intramedullary lesions on T2, 4 with low-intensity intramedullary lesions on T1, and 12 with significant cord compression but no signal change; according to Nagata classification scale, there were 5 abnormal segments at class I, 21 at class II, and 16 at class III. The rate of fusion, the Cobb angle, and the range of motion (ROM) of the cervical spine were measured preoperatively and postoperatively by the X-ray examinations. The improvement of the neurological function was evaluated by the JOA score. Results The average time of follow-up was 28.6 months (range, 24-58 months). After operation, dysphagia occurred in 2 cases (symptom rel ief after 1 month), hoarseness in 1 case (symptom rel ief after 3 months of methylcobalamin treatment), and degeneration of adjacent segments without symptom in 3 cases. The X-ray films showed the fusion rate of 100% at 12 months after operation without displacement, resorption or collapse of bone graft, and without breakage or loosening of plate and screw. The Cobb angles were (13.3 ± 10.4)° preoperatively, (15.8 ± 10.8)° immediately postoperatively, and (15.4 ± 11.4)° at last follow-up; the ROM of the cervical spine were (41.3 ± 17.4)° preoperatively and (23.8 ± 18.8)° at last follow-up; and the JOA scores were 8.2 ± 2.9 preoperatively, 13.7 ± 3.0 at 12 months postoperatively, and 13.9 ± 2.8 at last follow-up. All indexes showed significant differences between before operation and after operation (P lt; 0.05). The results of JOA scores were excellent in 8 cases, good in 6, fair in 2, and poor in 1 with an average improvement rate of 66.8% (range, 14%-88%) for the neurological function. Conclusion Adequate decompression, high rate of fusion, sol id mechanical stabil ity, improvement of total cervical lordosis,and the neurological function can be achieved through ASDDF for treatment of SCSM.
ObjectiveTo explore the early outcome of 3 different operation methods in the treatment of multi-segmental cervical spondylotic myelopathy (CSM). MethodsA retrospective analysis was made on the clinical data of 74 patients with multi-segmental CSM treated between January 2011 and March 2013. The patients were divided into 3 groups according to operation methods:open-door expansive laminoplasty by plate was used in 21 patients (group A), open-door expansive laminoplasty by anchor fixation in 28 patients (group B), and conventional unilaterally open-door expansive laminoplasty in 25 patients (group C). There was no significant difference in gender, age, disease druation, affected segments, preoperative Japanese Orthopaedic Association (JOA) score, and cervical curvature of C2-7 among 3 groups (P > 0.05). The peration time, intraoperative blood loss, and JOA score, cervical curvature, incidence of axial symptoms were recorded. ResultsThere was no significant difference of operation time and intraoperative blood loss between group A and group B (P > 0.05). All incisions healed by first intention. Cerebrospinal leak occurred in 2 cases (1 case of group B and 1 case of group C) and C5 nerve root palsy in 4 cases (2 cases of group A, 1 case of group B, and 1 case of group C); all the symptoms disappeared after symptomatic treatment. The patients were followed up 12-39 months (mean, 18.3 months). The position of internal fixation was good without loosening and pulling out in groups A and B. Reclosed open-door was observed in 2 cases of group C, which disappeared after the second surgery. The JOA scores were significantly increased at 6 months after operation when compared with preoperative scores in groups A, B, and C (P < 0.05). The cervical curvature of C2-7 at postoperation was significantly improved when compared with preoperative one in groups B and C (P < 0.05) except group A (P > 0.05). There were significant differences in JOA score and the cervical curvature among 3 groups at 6 months after operation (P < 0.05). The incidence of axial symptoms were 4.76% (1/21), 35.71% (10/28), and 72.00% (18/25) in groups A, B, and C respectively, showing significant differences (P < 0.017). ConclusionOpen-door expansive laminoplasty by plate has better early outcome than open-door expansive laminoplasty by anchor fixation and conventional unilaterally open-door expansive laminoplasty in the treatment of multi-segmental CSM.
Objective To analyse the correlation between cervical sagittal parameters of cervical spondylotic myelopathy in different sagittal curvature so as to find out representative cervical sagittal alignment parameters by measuring on MRI. Methods A retrospective analysis was made on the clinical data of 88 patients with cervical spondylotic myelopathy between July 2015 and January 2016. The C2-C7 Cobb angle, T1 slope (T1S), and C2-C7 sagittal vertical axis (C2-C7 SVA) were measured on T2-weight MRI. According to C2-C7 Cobb angle, the patients were divided into lordosis group (≥10° Cobb angle, 48 cases) and straightened group (0-10° Cobb angle, 40 cases). Intraclass correlation coefficient (ICC) was used for the reliability of measured data, Pearson correlation analysis for correlation between cervical sagittal parameters. Results ICC was 0.858-0.946, indicating good consistency of measurement parameters. The C2-C7 Cobb angle, T1S, and C2-C7 SVA were (5.6±2.4)°, (22.2±6.7)°, and (10.2±5.4) mm in straightened group, and were (20.1±8.2)°, (23.4±8.9)°, and (8.2±4.6) mm in lordosis group respectively. There was no correlation between the 3 parameters in straighten group (r=0.100,P=0.510 for T1S and C2-C7 Cobb angle;r=–0.100,P=0.500 for T1S and C2-C7 SVA;r=0.080,P=0.610 for C2-C7 Cobb angle and C2-C7 SVA). There was positive correlation between T1S and C2-C7 Cobb angle (r=0.540,P=0.000), negative correlation between T1S and C2-C7 SVA (r=–0.450,P=0.001), and no correlation between C2-C7 Cobb angle and C2-C7 SVA (r=–0.003,P=0.980). Conclusion For cervical spondylotic myelopathy in patients with cervical lordosis, only T1S measurement on MRI can be used as the main parameter to judge the sagittal curvature, but in patients with straightened cervical Cobb angle, measurements of T1S, C2-C7 Cobb angle, and C2-C7 SVA should be taken for the comprehensive evaluation of cervical sagittal curvature.
ObjectiveTo evaluate the effectiveness of three-dimensional (3D) printing artificial vertebral body and interbody fusion Cage in anterior cervical disectomy and fusion (ACCF) combined with anterior cervical corpectomy and fusion (ACDF).MethodsThe clinical data of 29 patients with multilevel cervical spondylotic myelopathy who underwent ACCF combined with ACDF between May 2018 and December 2019 were retrospectively analyzed. Among them, 13 patients were treated with 3D printing artificial vertebral body and 3D printing Cage as 3D printing group and 16 patients with ordinary titanium mesh Cage (TMC) and Cage as TMC group. There was no significant difference in gender, age, surgical segment, Nurick grade, disease duration, and preoperative Japanese Orthopaedic Association (JOA) score, visual analogue scale (VAS) score, and Cobb angle of fusion segment between the two groups (P>0.05). The operation time, intraoperative blood loss, hospitalization stay, complications, and implant fusion at last follow-up were recorded and compared between the two groups; JOA score was used to evaluate neurological function before operation, immediately after operation, at 6 months after operation, and at last follow-up; VAS score was used to evaluate upper limb and neck pain. Cobb angle of fusion segment was measured and the difference between the last follow-up and the immediate after operation was calculated. The height of the anterior border (HAB) and the height of the posterior border (HPB) were measured immediately after operation, at 6 months after operation, and at last follow-up, and the subsidence of implant was calculated.ResultsThe operation time of 3D printing group was significantly less than that of TMC group (t=3.336, P=0.002); there was no significant difference in hospitalization stay and intraoperative blood loss between the two groups (P>0.05). All patients were followed up 12-19 months (mean, 16 months). There was no obvious complication in both groups. There were significant differences in JOA score, VAS score, and Cobb angle at each time point between the two groups (P<0.05). There was an interaction between time and group in the JOA score (F=3.705, P=0.025). With time, the increase in JOA score was different between the 3D printing group and the TMC group, and the increase in the 3D printing group was greater. There was no interaction between time and group in the VAS score (F=3.038, P=0.065), and there was no significant difference in the score at each time point between the two groups (F=0.173, P=0.681). The time of the Cobb angle interacted with the group (F=15.581, P=0.000). With time, the Cobb angle of the 3D printing group and the TMC group changed differently. Among them, the 3D printing group increased more and the TMC group decreased more. At last follow-up, there was no significant difference in the improvement rate of JOA score between the two groups (t=0.681, P=0.502), but the Cobb angle difference of the 3D printing group was significantly smaller than that of the TMC group (t=5.754, P=0.000). At last follow-up, the implant fusion rate of the 3D printing group and TMC group were 92.3% (12/13) and 87.5% (14/16), respectively, and the difference was not significant (P=1.000). The incidence of implant settlement in the 3D printing group and TMC group at 6 months after operation was 15.4% (2/13) and 18.8% (3/16), respectively, and at last follow-up were 30.8% (4/13) and 56.3% (9/16), respectively, the differences were not significant (P=1.000; P=0.264). The difference of HAB and the difference of HPB in the 3D printing group at 6 months after operation and last follow-up were significantly lower than those in the TMC group (P<0.05).ConclusionFor patients with multilevel cervical spondylotic myelopathy undergoing ACCF combined with ACDF, compared with TMC and Cage, 3D printing artificial vertebrae body and 3D printing Cage have the advantages of shorter operation time, better reduction of height loss of fusion vertebral body, and maintenance of cervical physiological curvature, the early effectiveness is better.
Objective To evaluate the application of surgical strategies for the treatment of cervical ossification of the posterior longitudinal ligament (OPLL) involving the C2 segment. Methods The literature about the surgery for cervical OPLL involving C2 segment was reviewed, and the indications, advantages, and disadvantages of surgery were summarized. Results For cervical OPLL involving the C2 segments, laminectomy is suitable for patients with OPLL involving multiple segments, often combined with screw fixation, and has the advantages of adequate decompression and restoration of cervical curvature, with the disadvantages of loss of cervical fixed segmental mobility. Canal-expansive laminoplasty is suitable for patients with positive K-line and has the advantages of simple operation and preservation of cervical segmental mobility, and the disadvantages include progression of ossification, axial symptoms, and fracture of the portal axis. Dome-like laminoplasty is suitable for patients without kyphosis/cervical instability and with negative R-line, and can reduce the occurrence of axial symptoms, with the disadvantage of limited decompression. The Shelter technique is suitable for patients with single/double segments and canal encroachment >50% and allows for direct decompression, but is technically demanding and involves risk of dural tear and nerve injury. Double-dome laminoplasty is suitable for patients without kyphosis/cervical instability. Its advantages are the reduction of damage to the cervical semispinal muscles and attachment points and maintenance of cervical curvature, but there is progress in postoperative ossification. Conclusion OPLL involving the C2 segment is a complex subtype of cervical OPLL, which is mainly treated through posterior surgery. However, the degree of spinal cord floatation is limited, and with the progress of ossification, the long-term effectiveness is poor. More research is needed to address the etiology of OPLL and to establish a systematic treatment strategy for cervical OPLL involving the C2 segment.