Objective To investigate the influence of airflow limitation upon lung deposition of inhaled corticosteroids in patients with chronic obstructive pulmonary disease ( COPD) . Methods The radionuclide 99mTc was used to lable budesonide which was inhaled through compressor nebulizer. Lung deposition was evaluated by nuclear medicine pulmonary ventilation scintigraphy. Peripheral to central ratio of lung deposition ( P/C% ) was calculated by region of interest ( ROI) metod. Results Forty-threepatients with stable COPD were enrolled in the study, of whom 41 patients completed the trial. The median age was 68 years ( range, 48 to 79 years) and the median FEV1 was 44. 9% predicted. The P/C% was ( 47. 96 ±6. 08) % . The patients with P/C% more than 50% had a higher FEV1% pred and FEV1 /FVC than those with P/C% less than 50% [ FEV1% pred: ( 51. 85 ±18. 20) % vs. ( 40. 52 ±12. 99) % .FEV1 /FVC: ( 59. 95 ±11. 87) % vs. ( 51. 73 ±9. 28) % ] . There was a positive correlation between P/C% and FEV1% pred ( r = 0. 391, P = 0. 024) and FEV1 /FVC ratio ( r = 0. 517, P = 0. 002) . Conclusion Lung peripheral airway deposition of inhaled corticosteroids was limited by airflow obstruction.
Objective To investigate the role of micro RNA-451 (miRNA-451) in promoting the osteogenesis of mesenchymal stem cells (MSCs) by targeting regulatory calcium binding protein 39 (CAB39). Methods pMIR-report and pRL-TK vectors were selected to identify the relationship between miRNA-451 and CAB39 by using dual-luciferase reporter assay. pre-miRNA-451 (group A), anti-miRNA-451 (group C), pre-miRNA negative control (group B), and anti-miRNA negative control (group D) were transfected into the C3H10T1/2 cells, respectively. Then, the cells were collected after osteogenic induction for 7 and 14 days. At 7 and 14 days, the real-time fluorescent quantitative PCR and Western blot assays were performed to detect the related osteogenetic biomarkers [Runx2 and alkaline phosphatase (ALP) mRNA] and expressions of CAB39 protein. At 14 days, the extracellular calcium deposition during the osteogenesis of MSCs was tested by Alizarin red staining method. Results CAB39 was the target gene of miRNA-451. At 7 and 14 days after osteogenic induction, the mRNA expressions of Runx2 and ALP in group A were significantly higher than those in group B (P lt; 0.05), and the expressions in group C was significantly lower than those in group D (P lt; 0.05). Furthermore, at 14 days after osteogenic induction, the protein expression of CAB39 in group A (0.55 ± 0.05) was significantly lower than that in group B (1.00 ± 0.07), and the protein expression in group C (1.21 ± 0.05) was significantly higher than that in group D (1.00 ± 0.04), all showing significant difference (P lt; 0.05). Finally, at 14 days after osteogenic induction, the extracellular calcium deposition in group A was obviously more than that in group B, and group C was downregulated when compared with group D. Conclusion miRNA-451 can promote the osteogenesis process of MSCs by downregulating the CAB39.
【Abstract】 Objective The present study employed both static and dynamic imaging modal ities to study bothintra- and extravascular events attributing to steroid-associated osteonecrosis (ON) using an experimental protocol with a single low-dose l i ppolysaccharide (LPS) injection and subsequently three injections of high-dose methylprednisolone (MPS). Methods Fourteen 28-week-old male New Zealand white rabbits received one intravenous injection of LPS (10 μg/ kg). After 24 hours, three injections of 20 mg/kg of MPS were given intramuscularly at a time interval of 24 hours. Additional 6 rabbits were used as controls. Dynamic MRI was performed on bilateral femora for local intraosseous perfusion before and after LPS injection. Blood samples were collected for haematological examinations before and after LPS injection. Bilateral femora were dissected and decalcified for microCT-based microangiography. ON lesion, intravascular thrombus and extravascular marrow fat cell size were examined histopathologically. Results Intravascular thrombus was observed in all ON rabbits. Extravascular marrow fat cell size was significantly increased in ON rabbits than that of the controls (P lt; 0.05). Compared to basel ine, a significant decrease in ratio of tissue-type-plasminogen-activator/plasminogen-activator inhibitor 1,activated-partial- thromboplatin-time, and a significant increase in ratio of low-density-l ipoprotein/high-density-l ipoprotein were only found in ON rabbits (P lt; 0.05). Dynamic MRI showed a significant decrease in the perfusion index ‘maximum enhancement’ in the ON rabbits (P lt; 0.05) and microCT-based microangiography showed blocked stem vessels in ON samples.Overall, 93% of the rabbits (13/14) developed ON and no rabbits died throughout the experiment period. Conclusion Bothintra- and extravascular events were found attributing to the steroid- associated ON based on our experimental protocol with a single low-dose LPS injection and subsequent three injections of high-dose MPS. Both high ON incidence and no mortal ity in rabbits treated with this inductive protocol suggested its effectiveness for future studies on evaluation of therapeutic efficacy of interventions developed for prevention of steroid-associated ON.
The rutile structure titanium oxide (Ti-O) film was prepared on the pure titanium material TA2 (99.999%) surface by the magnetic filter high vacuum arc deposition sputtering source. The method can not only maintain the material mechanical properties, but also improve the surface properties for better biocompatibility to accommodate the physiological environment. The preparation process of the Ti-O film was as follows. Firstly, argon ions sputtered to the TA2 substrate surface to remove the excess impurities. Secondly, a metal ion source generated Ti ions and oxygen ions by the RF discharge. Meanwhile a certain negative bias was imposed on the sample. There a certain composition of Ti-O film was obtained under a certain pressure of oxygen in the vacuum chamber. Finally, X-ray diffraction was used to research the structure and composition of the film. The results showed that the Ti-O film of the rutile crystal structure was formed under the 0.18 Pa oxygen partial pressure. A Nano scratch experiment was used to test the coating adhesion property, which demonstrated that the film was stable and durable. The contact angle experiment and the platelet clotting experiment proved that the modified surface method had improved platelet adhesion performance, and, therefore, the material possessed better biocompatibility. On the whole, the evaluations proved the modified material had excellent performance.
Amyloid β-protein (Aβ) deposition is an important prevention and treatment target for Alzheimer’s disease (AD), and early detection of Aβ deposition in the brain is the key to early diagnosis of AD. Magnetic resonance imaging (MRI) is the perfect imaging technology for the clinical diagnosis of AD, but it cannot display the plaque deposition directly. In this paper, based on two feature selection modes-filter and wrapper, chain-like agent genetic algorithm (CAGA), principal component analysis (PCA), support vector machine (SVM) and random forest (RF), we designed six kinds of feature learning classification algorithms to detect the information (distribution) of Aβ deposition through magnetic resonance image pixels selection. Firstly, we segmented the brain region from brain MR images. Secondly, we extracted the pixels in the segmented brain region as a feature vector (features) according to rows. Thirdly, we conducted feature learning on the extracted features, and obtained the final optimal feature subset by voting mechanism. Finally, using the final optimal selected features, we could find and mark the corresponding pixels on the MR images to show the information about Aβ plaque deposition by elastic mapping. According to the experimental results, the proposed pixel features learning methods in this paper could extract and reflect Aβ plaque deposition, and the best classification accuracy could be as high as 80%, thereby showing the effectiveness of the methods. The proposed methods can precisely detect the information of the Aβ plaque deposition, thereby being helpful for improving classification accuracy of diagnosis of AD.
Inhalable particles deposition in the human respiratory system is the main cause of many respiratory and cardiovascular diseases. It plays an important role in related disease prevention and treatment through establishing computer or external entity models to study rules of particle deposition. The paper summarized and analyzed the present research results of various inhalable particle deposition models of upper respiratory tract and pulmonary area, and expounded the application in the areas of disease inducement analysis, drug inhale treatment etc. Based on the review, the paper puts forward the problems and application limitations of present research, especially pointing out future emphasis in development directions. It will have a value of reference guidance for further systematic and in-depth study on the inhalable particle deposition simulation, experiment and application.
Research on the deposition of inhalable particles in the alveoli of the lungs is important to the causes, development for common respiratory diseases such as emphysema, and even the optimization of clinical treatment and prevention programs of them. In this paper, an in vitro experimental model was established to simulate the deposition of terminal bronchioles and pulmonary acinus particles. The deposition rate of inhalable particles with different particle sizes in the pulmonary acinus was studied under different functional residual capacity. The results showed that the particle diameter was an important factor affecting the deposition of particles in the lung alveoli. Particles with 1 μm diameter had the highest deposition rate. With the functional residual capacity increasing, particulate deposition rate significantly reduced. The results of this study may provide data support and optimization strategy for target inhalation therapy of respiratory diseases such as emphysema and pneumoconiosis. The established model may also provide a feasible in vitro experimental model for studying the deposition of inhalable particles in the pulmonary alveoli.
ObjectiveTo manufacture a polycaprolactone (PCL)/type Ⅰ collagen (COL Ⅰ) tissue engineered meniscus scaffold (hereinafter referred to as PCL/COL Ⅰ meniscus scaffold) by three-dimensional (3D) printing with low temperature deposition technique and to study its physicochemical properties.MethodsFirst, the 15% PCL/4% COLⅠ composite solution and 15% PCL simple solution were prepared. Then, 15% PCL/4% COL Ⅰmeniscus scaffold and 15% PCL meniscal scaffold were prepared by using 3D printing with low temperature deposition techniques. The morphology and microstructure of the scaffolds were observed by gross observation and scanning electron microscope. The compression modulus and tensile modulus of the scaffolds were measured by biomechanical test. The components of the scaffolds were analyzed by Fourier transform infrared spectroscopy (FTIR). The contact angle of the scaffold surface was measured. The meniscus cells of rabbits were cultured with the two scaffold extracts and scaffolds, respectively. After cultured, the cell proliferations were detected by cell counting kit 8 (CCK-8), and the normal cultured cells were used as controls. Cell adhesion and growth of scaffold-cell complex were observed by scanning electron microscope.ResultsAccording to the gross and scanning electron microscope observations, two scaffolds had orientated 3D microstructures and pores, but the surface of the PCL/COLⅠ meniscus scaffold was rougher than the PCL meniscus scaffold. Biomechanical analysis showed that the tensile modulus and compression modulus of the PCL/COL Ⅰ meniscus scaffold were not significantly different from those of the PCL meniscus scaffold (P>0.05). FTIR analysis results showed that COL Ⅰ and PCL were successful mixed in PCL/ COL Ⅰ meniscus scaffolds. The contact angle of PCL/COLⅠ meniscus scaffold [(83.19±7.49)°] was significantly lower than that of PCL meniscus scaffold [(111.13±5.70)°] (t=6.638, P=0.000). The results of the CCK-8 assay indicated that with time, the number of cells cultured in two scaffold extracts showed an increasing trend, and there was no significant difference when compared with the control group (P>0.05). Scanning electron microscope observation showed that the cells attached on the PCL/ COL Ⅰ meniscus scaffold more than that on the PCL scaffold.ConclusionPCL/COLⅠmeniscus scaffolds are prepared by 3D printing with low temperature deposition technique, which has excellent physicochemical properties without cytotoxicity. PCL/COLⅠmeniscus scaffold is expected to be used as the material for meniscus tissue engineering.
Three-dimensional (3D) printing is a low-cost, high-efficiency production method, which can reduce the current cost and increase the profitability of skin repair material industry nowadays, and develop products with better performance. The 3D printing technology commonly used in the preparation of skin repair materials includes fused deposition molding technology and 3D bioprinting technology. Fused deposition molding technology has the advantages of simple and light equipment, but insufficient material selection. 3D bioprinting technology has more materials to choose from, but the equipment is cumbersome and expensive. In recent years, research on both technologies has focused on the development and application of materials. This article details the principles of fused deposition modeling and 3D bioprinting, research advances in wound dressings and tissue engineering skin production, and future developments in 3D printing on skin tissue repair, including cosmetic restoration and biomimetic tissue engineering. Also, this review prospects the development of 3D printing technology in skin tissue repairment.
The inhalation and deposition of particles in human pulmonary acinus region can cause lung diseases. Numerical simulation of the deposition of inhaled particles in the pulmonary acinus region has offered an effective gateway to the prevention and clinical treatment of these diseases. Based on some important affecting factors such as pulmonary acinar models, model motion, breathing patterns, particulate characteristics, lung diseases and ages, the present research results of numerical simulation in human pulmonary acinus region were summarized and analyzed, and the future development directions were put forward in this paper, providing new insights into the further research and application of the numerical simulation in the pulmonary acinus region.