We searched and retrieved literature on the topic of medical image processing published on SCI journals in the past 10 years. We then imported the retrieved literature into TDA for data cleanup before data analysis and processing by EXCLE and UCINET to generate tables and figures that could indicate disciplinary correlation and research hotspots from the perspective of bibliometrics. The results indicated that people in Europe and USA were leading researchers on medical image processing with close international cooperation. Many disciplines contributed to the fast development of medical image processing with intense interdisciplinary researches. The papers that we found show recent research hotspots of the algorithm, system, model, image and segmentation in the field of medical image processing. Cluster analysis on key words of high frequency demonstrated complicated clustering relationship.
To solve the problems of noise interference and edge signal weakness for the existing medical image, we used two-dimensional wavelet transform to process medical images. Combined the directivity of the image edges and the correlation of the wavelet coefficients, we proposed a medical image processing algorithm based on wavelet characteristics and edge blur detection. This algorithm improved noise reduction capabilities and the edge effect due to wavelet transformation and edge blur detection. The experimental results showed that directional correlation improved edge based on wavelet transform fuzzy algorithm could effectively reduce the noise signal in the medical image and save the image edge signal. It has the advantage of the high-definition and de-noising ability.
A measurement system based on the image processing technology and developed by LabVIEW was designed to quickly obtain the range of motion (ROM) of spine. NI-Vision module was used to pre-process the original images and calculate the angles of marked needles in order to get ROM data. Six human cadaveric thoracic spine segments T7-T10 were selected to carry out 6 kinds of loads, including left/right lateral bending, flexion, extension, cis/counterclockwise torsion. The system was used to measure the ROM of segment T8-T9 under the loads from 1 N·m to 5 N·m. The experimental results showed that the system is able to measure the ROM of the spine accurately and quickly, which provides a simple and reliable tool for spine biomechanics investigators.
Based on repeated experiments as well as continuous researching and improving, an efficient scheme to measure velocity and displacement of the coxa and knee movements based on video image processing technique is presented in this paper. The scheme performed precise and real-time quantitative measurements of 2D velocity or displacement of the coxa and knee using a video camera mounted on one side of the healing and training beds. The beds were based on simplified pinhole projection model. In addition, we used a special-designed auxiliary calibration target, composed by 24 circle points uniformly located on two concentric circles and two straight rods which can rotate freely along the concentric center within the vertical plane, to do the measurements. Experiments carried out in our laboratory showed that the proposed scheme could basically satisfy the requirements about precision and processing speed of such kind of system, and would be very suitable to be applied to smart evaluation/training and healing system for muscles/balance function disability as an advanced and intuitional helping method.
Skin aging principles play important roles in skin disease diagnosis, the evaluation of skin cosmetic effect, forensic identification and age identification in sports competition, etc. This paper proposes a new method to evaluate the skin aging objectively and quantitatively by skin texture area. Firstly, the enlarged skin image was acquired. Then, the skin texture image was segmented by using the iterative threshold method, and the skin ridge image was extracted according to the watershed algorithm. Finally, the skin ridge areas of the skin texture were extracted. The experiment data showed that the average areas of skin ridges, of both men and women, had a good correlation with age (the correlation coefficient r of male was 0.938, and the correlation coefficient r of female was 0.922), and skin texture area and age regression curve showed that the skin texture area increased with age. Therefore, it is effective to evaluate skin aging objectively by the new method presented in this paper.
Aiming at long signal acquisition time, low flux, bad signal-to-noise ratio and low intelligence in coloration biochip reader, a new kind of rapid device with high flux was developed. The device consisted of hardware system and software system. It used a charge-coupled device (CCD) as the photoelectric sensor elements and obtained the biochip microarray image. The device integrated the embedded operating system based on i.MX6 chip. The microarray image processing, data analysis and result output were achieved through the code information of the software chip. Experiments with the standard grayscale sheet and standard format chip were carried out. The results showed that the maximum measurement error was less than 0.1%, the value of R2 was 98.7%, and the value of CV was 1.096 1%. The comparison results of 200 samples showed that detection performance of the proposed device was better than that of the same kind of marketed equipment.
Objective To determine feasibility of texture analysis of non-enhanced CT scan for differential diagnosis of liver cancer and hepatic hemangioma. Methods Fifty-six patients with liver cancer or hepatic hemangioma confirmed by pathology were enrolled in this retrospective study. After exclusion of images of 4 patients with artifacts and lesion diameter less than 1.0 cm, images of 52 patients (57 lesions) were available to further analyze. Texture features derived from the gray-level histogram, co-occurrence and run-length matrix, absolute gradient, autoregressive model, and wavelet transform were calculated. Fisher, probability of classification error and average correlation (POE+ACC), and mutual information coefficients (MI) were used to extract 10 optimized texture features. The texture characteristics were analyzed by using linear discriminant analysis (LDA) and nonlinear discriminant analysis (NDA) provided by B11 module in the Mazda software, the minimum error probability of differential diagnosis of liver cancer and hepatic hemangioma was calculated. Most discriminating features (MDF) of LDA was applied to K nearest neighbor classification (KNN); NDA to extract the data used in artificial neural network (ANN) for differential diagnosis. Results The NDA/ANN-POE+ACC was the best for identifying liver cancer and hepatic hemangioma, and the minimum error probability was the lowest as compared with the LDA/KNN-Fisher, LDA/KNN-POE+ACC, LDA/KNN-MI, NDA/ANN-Fisher, and NDA/ANN-MI respectively, the differences were statistically significant (χ2=4.56, 4.26, 3.14, 3.14, 3.33;P=0.020, 0.018, 0.026, 0.026, 0.022). Conclusions The minimum error probability is low for different texture feature selection methods and different analysis methods of Mazda texture analysis software in identifying liver cancer and hepatic hemangioma, and NDA/ANN-POE+ACC method is best. So it is feasible to use texture analysis of non-enhanced CT images to identify liver cancer and hepatic hemangioma.
Skin aging is the most intuitive and obvious sign of the human aging processes. Qualitative and quantitative determination of skin aging is of particular importance for the evaluation of human aging and anti-aging treatment effects. To solve the problem of subjectivity of conventional skin aging grading methods, the self-organizing map (SOM) network was used to explore an automatic method for skin aging grading. First, the ventral forearm skin images were obtained by a portable digital microscope and two texture parameters, i.e., mean width of skin furrows and the number of intersections were extracted by image processing algorithm. Then, the values of texture parameters were taken as inputs of SOM network to train the network. The experimental results showed that the network achieved an overall accuracy of 80.8%, compared with the aging grading results by human graders. The designed method appeared to be rapid and objective, which can be used for quantitative analysis of skin images, and automatic assessment of skin aging grading.
In order to accurately localize the image coordinates and serial numbers of intraoperative subdural matrix electrodes, a matrix electrode localization algorithm for image processing is proposed in this paper. Firstly, by using point-by-point extended electrode location algorithm, the electrode is expanded point-by-point vertically and horizontally, and the initial coordinates and serial numbers of each electrode are determined. Secondly, the single electrode coordinate region extraction algorithm is used to determine the best coordinates of each electrode, so that the image coordinates and serial numbers of all electrodes are determined point-by-point. The results show that the positioning accuracy of electrode serial number is 100%, and the electrode coordinate positioning error is less than 2 mm. The algorithms in this paper can accurately localize the image coordinates and the serial numbers of a matrix electrode arranged in an arc, which could aid drawing of cortical function mapping, and achieve precise positioning of brain functional areas, so that it can be widely used in neuroscience research and clinical application based on electrocorticogram analysis.
To locate the nuclei in hematoxylin-eosin (HE) stained section images more simply, efficiently and accurately, a new method based on distance estimation is proposed in this paper, which shows a new mind on locating the nuclei from a clump image. Different from the mainstream methods, proposed method avoids the operations of searching the combined singles. It can directly locate the nuclei in a full image. Furthermore, when the distance estimation built on the matrix sequence of distance rough estimating (MSDRE) is combined with the fact that a center of a convex region must have the farthest distance to the boundary, it can fix the positions of nuclei quickly and precisely. In addition, a high accuracy and efficiency are achieved by this method in experiments, with the precision of 95.26% and efficiency of 1.54 second per thousand nuclei, which are better than the mainstream methods in recognizing nucleus clump samples. Proposed method increases the efficiency of nuclear location while maintaining the location's accuracy. This can be helpful for the automatic analysis system of HE images by improving the real-time performance and promoting the application of related researches.