ObjectiveTo investigate the effect of three-dimensional (3D) printing guide plate on improving femoral rotational alignment and patellar tracking in total knee arthroplasty (TKA).MethodsBetween January 2018 and October 2018, 60 patients (60 knees) with advanced knee osteoarthritis who received TKA and met the selection criteria were selected as the study subjects. Patients were randomly divided into two groups according to the random number table method, with 30 patients in each group. The TKA was done with the help of 3D printing guide plate in the guide group and following traditional procedure in the control group. There was no significant difference in gender, age, disease duration, side, and preoperative hip-knee-ankle angle (HKA), posterior condylar angle (PCA), patella transverse axis-femoral transepicondylar axis angle (PFA), Hospital for Special Surgery (HSS) score, and American Knee Society (AKS) score (P>0.05).ResultsAll incisions healed by first intention and no complications related to the operation occurred. All patients were followed up 10-12 months, with an average of 11 months. HSS score and AKS score of the two groups at 6 months after operation were significantly higher than those before operation (P<0.05), but there was no significant difference between the two groups (P>0.05). Postoperative X-ray films showed that the prosthesis was in good position, and no prosthesis loosening or sinking occurred during follow-up. HKA, PCA, and PFA significantly improved in the two groups at 10 months after operation compared with those before operation (P<0.05). There was no significant difference in HKA at 10 months between the two groups (t=1.031, P=0.307). PCA and PFA in the guide group were smaller than those in the control group (P<0.05).ConclusionApplication of 3D printing guide plate in TKA can not only correct the deformity of the knee joint and alleviate the pain symptoms, but also achieve the goal of the accurate femoral rotation alignment and good patellar tracking.
ObjectiveTo investigate the improvement of femoral rotation alignment in total knee arthroplasty (TKA) by robotic-arm assisted positioning and osteotomy and its short-term effectiveness.MethodsBetween June 2020 and November 2020, 60 patients (60 knees) with advanced osteoarthritis of the knee, who met the selection criteria, were selected as the study subjects. Patients were randomly divided into two groups according to the random number table method, with 30 patients in each group. Patients were treated with robotic-arm assisted TKA (RATKA) in trial group, and with conventional TKA in control group. There was no significant difference in gender, age, side and course of osteoarthritis, body mass index, and the preoperative hip-knee-ankle angle (HKA), lateral distal femoral angle (LDFA), medial proximal tibial angle (MPTA), posterior condylar angle (PCA), knee society score-knee (KSS-K) and KSS-function (KSS-F) scores between the two groups (P>0.05). The clinical (KSS-K, KSS-F scores) and imaging (HKA, LDFA, MPTA, PCA) evaluation indexes of the knee joints were compared between the two groups at 3 months after operation.ResultsAll patients were successfully operated. The incisions in the two groups healed by first intention, with no complications related to the operation. Patients in the two groups were followed up 3-6 months, with an average of 3.9 months. KSS-K and KSS-F scores of the two groups at 3 months after operation were significantly higher than those before operation (P<0.05), but there was no significant difference between the two groups (P>0.05). X-ray re-examination showed that the prosthesis was in good position, and no prosthesis loosening or sinking occurred. HKA, MPTA, and PCA significantly improved in both groups at 3 months after operation (P<0.05) except LDFA. There was no significant difference in HKA, LDFA, and MPTA between the two groups (P>0.05). PCA in trial group was significantly smaller than that in control group (t=2.635, P=0.010).ConclusionRATKA can not only correct knee deformity, relieve pain, improve the quality of life, but also achieve the goal of restoring accurate femoral rotation alignment. There was no adverse event after short-term follow-up and the effectiveness was satisfactory.
Objective To investigate the effect of Navio robot-assisted unicompartmental knee arthroplasty (UKA) on the biomechanics of knee joint during sitting-up movement, and to determine whether UKA can maintain the biomechanical characteristics of knee joint. Methods The clinical data of 8 patients with medial compartment osteoarthritis treated with medial fixed platform of Navio robot-assisted UKA between January 2018 and January 2019 and had the complete follow-up data were retrospectively analyzed. There were 4 males and 4 females; the age ranged from 58 to 67 years, with an average of 62.3 years. The disease duration was 6-18 months, with an average of 13 months. The varus deformity ranged from 4° to 6°, with an average of 5°; the knee flexion range of motion was 0°-130°, with an average of 110°. All patients had no extension limitation. The imaging data of bilateral knees during sitting-up movement were collected by biplane C-arm X-ray machine at 3 weeks before operation and 7 months after operation. The three-dimensional models of femur and tibia were established by dual-energy CT scanning, and the three-dimensional models of femur and tibia were matched and synchronized with the femur and tibia in X-ray film by automatic matching tracer software. The biomechanical parameters of femur and tibia were measured, including internal rotation/external rotation, varus/valgus, forward/backward displacement of medial and lateral tibia contact center, and lateral compartment joint space. Results Eight patients were followed up 5-7 months, with an average of 6.4 months. In the comparison of the affected side before and after operation, except for the difference of varus/valgus which was significant (t=4.959, P=0.002), the differences in other indicators was not significant (P>0.05). There were significant differences in varus/valgus and internal rotation/external rotation between healthy and affected sides at 3 weeks before operation (P<0.05), and the differences in other indicators was not significant (P>0.05). At 7 months after operation, the difference in the forward and backward displacement of medial tibia contact center was significant (t=3.798, P=0.007), and the differences in other indicators was not significant (P>0.05). Conclusion UKA can effectively correct the varus and valgus of the knee joint, and restore the rotational biomechanical characteristics of the affected knee joint. It does not affect the establishment of the lateral compartment joint space, but the medial and lateral tibia contact center still changes.
ObjectiveTo estimate the early effectivenss of computer navigation-assisted total knee arthroplasty (TKA) by comparing with traditional TKA.MethodsThe clinical data of 89 patients (100 knees) underwent primary TKA between October 2017 and July 2018 were analyzed retrospectively, including 44 patients (50 knees) who completed the TKA under the computer-assisted navigation system as the navigation group and 45 patients (50 knees) treated with traditional TKA as the control group. There was no significant difference between the two groups (P>0.05) in gender, age, body mass index, diagnosis, side, disease duration, Kellgren-Lawrence classification of osteoarthritis, and preoperative American Hospital for Special Surgery (HSS) score, range of motion (ROM), hip-knee-ankle angle (HKA) deviation. The operation time, incision length, difference in hemoglobin before and after operation, postoperative hospital stay, and the complications were recorded and compared between the two groups. The HSS score, ROM, and joint forgetting score (FJS-12) were used to evaluate knee joint function in all patients. Unilateral patients also underwent postoperative time of up and go test and short physical performance battery (SPPB) test. At 1 day after operation, the HKA, mechanical lateral distal femoral angle (mLDFA), mechanical medial proximal tibial angle (mMPTA), sagittal femoral component angle (sFCA), and sagittal tibial component angle (sTCA) were measured and calculated the difference between the above index and the target value (deviation); and the joint line convergence angle (JLCA) was also measured. ResultsThe operations of the two groups were successfully completed, and the incisions healed by first intention. The operation time and incision length of the navigation group were longer than those of the control group (P<0.05); the difference in difference of hemoglobin before and after the operation and the postoperative hospital stay between groups was not significant (P>0.05). Patients in the two groups were followed up 27-40 months, with an average of 33.6 months. Posterior tibial vein thrombosis occurred in 1 case in each of the two groups, and 1 case in the control group experienced repeated knee joint swelling. The HSS scores of the two groups gradually increased after operation (P<0.05); HSS scores in the navigation group at 1 and 2 years after operation, and knee ROM and FJS-12 scores at 2 years were significantly higher than those in the control group (P<0.05). There was no significant difference in the postoperative time of up and go test and SPPB results between the two groups at 7 days after operation (P>0.05); the postoperative time of up and go test of the navigation group was shorter than that of the control group at 2 years (t=–2.226, P=0.029), but there was no significant difference in SPPB (t=0.429, P=0.669). X-ray film measurement at 1 day after operation showed that the deviation of HKA after TKA in the navigation group was smaller than that of the control group (t=–7.392, P=0.000); among them, the HKA deviations of 50 knees (100%) in the navigation group and 36 knees (72%) in the control group were less than 3°, showing significant difference between the two groups (χ2=16.279, P=0.000). The JLCA and the deviations of mLDFA, mMPTA, sFCA, and sTCA in the navigation group were smaller than those in the control group (P<0.05).ConclusionCompared with traditional TKA, computer navigation-assisted TKA can obtain more accurate prosthesis implantation position and lower limb force line and better early effectiveness. But there is a certain learning curve, and the operation time and incision length would be extended in the early stage of technology application.
ObjectiveTo investigate the short-term effectiveness of novel computer navigation system (Knee 3 software; Brainlab, Germany) assisted total knee arthroplasty (TKA).MethodsBetween July 2020 and December 2020, 19 patients underwent unilateral TKA assisted with Knee 3 software. There were 4 males and 15 females. The mean age was 66.3 years (range, 52-79 years). Eighteen patients were diagnosed with osteoarthritis and 1 patient with rheumatoid arthritis. Sixteen patients had varus knees and 3 patients had valgus knees. Preoperative Western Ontario and McMaster University Osteoarthritis Index (WOMAC) pain, stiffness, function, and total scores were 12.4±3.4, 2 (1, 4), 22 (18, 29), and 37 (29, 43), respectively. Intraoperatively, the medial and lateral gaps in knee extension and in 90° of knee flexion were recorded. The operation time, intraoperative blood loss, blood transfusion, and complications were recorded. The hip-knee-ankle angle (HKA), lateral distal femoral angle, and medial proximal tibial angle were measured to evaluate lower limb alignment and prostheses’s alignment using X-ray films at 6 weeks after operation. Patient’s satisfaction rate and WOMAC pain, stiffness, function, and total scores were investigated.ResultsEighteen patients (94.7%) had medial- lateral gap balancing in knee extension, 18 patients (94.7%) had medial-lateral gap balancing in 90° of knee flexion, 19 patients (100%) had medial gap balancing between knee extension and 90° of knee flexion, and 18 patients (94.7%) had lateral gap balancing between knee extension and 90° of knee flexion. The mean operation time was 126 minutes (range, 100-200 minutes). The mean intraoperative blood loss was 205 mL (range, 100-400 mL). Patients were followed up 4-8 months, with an average of 6.2 months. Postoperative complications included 1 deep vein thrombosis of lower extremities and 1 cerebral infarction. X-ray films showed that the mean HKA, lateral distal femoral angle, and medial proximal tibial angle were 179.8° (range, 178°-182°), 83.5° (range, 80°-87°), and 89.5° (range, 87°-93°), respectively. At last follow-up, WOMAC pain, stiffness, function, and total scores were 3.6±1.9, 0 (0, 2), 4 (2, 6), and 9 (5, 10), respectively, which improved when compared with preoperative scores (P<0.05). Twelve patients were very satisfied with the operation results and 7 patients were satisfied with the operation results. The overall satisfaction rate was 100%.ConclusionKnee 3 software can help to obtain good gap balancing and optimal lower limb alignment, with high patient’s satisfaction and good short-term effecectiveness.
Objective To explore the prediction of postoperative coronal lower limb alignment by the tibia fibular angle (TFA) and femoral fibular angle (FFA) after osteotomy in medial open-wedge high tibial osteotomy (MOWHTO). Methods A clinical data of 20 patients with medial compartment osteoarthritis, who were treated with MOWHTO between September 2019 and September 2020, was retrospectively analyzed. Among them, there were 9 males and 11 females; the age ranged from 46 to 69 years, with an average of 56.0 years. The body mass index (BMI) was 21.3- 35.7 kg/m2, with an average of 26.7 kg/m2. Osteoarthritis involved 11 cases of left knee and 9 cases of right knee; the disease duration was 2-6 years, with an average of 3.8 years. According to the Kellgren-Lawrence classification, there were 7 cases of grade Ⅰ, 9 cases of grade Ⅱ, and 4 cases of grade Ⅲ. The angle and height for open-wedge was planned preoperatively by osteotomy master software, and the TFA and FFA were measured by software after simulated osteotomy. The intraoperative angle for open-wedge was adjusted according to TFA and FFA after simulated osteotomy.The lateral distal femoral angle (LDFA), medial proximal tibial angle (MPTA), joint line convergence angle (JLCA), mechanical femorotibial angle (mFTA), weight-bearing line (WBL) ratio, TFA, and FFA were measured before operation and at 2 days after operation. The difference (X) between the intraoperative measurement value and the preoperative plan value of TFA/FFA, and the difference (Y) between the postoperative WBL ratio and the target alignment (62.5%) were calculated, and the correlation between the two indicators was analyzed by Pearson’s test. According to the median BMI of patients (25.81 kg/m2), the patients were allocated into high BMI group (>25.81 kg/m2, n=10) and low BMI group (≤25.81 kg/m2, n=10), and the influencing factors of WBL ratio was analyzed by linear regression. Results There was no significant difference between pre- and post-operation in LDFA and JLCA (P>0.05); while there were significant differences between pre- and post-operation in MPTA, mFTA, and WBL ratio (P<0.05). The TFA was (89.5±4.0)° during operation and (87.7±4.7)° after operation, showing significant difference (t=2.991, P=0.008). There was a positive correlation between the difference (X) between the intraoperative measurement value and the preoperative plan value of TFA and the difference (Y) between the postoperative WBL ratio and the target alignment (r=0.595, P=0.006). The FFA was (86.9±4.3)° during operation and (85.7±4.4)° after operation, showing significant difference (t=1.760, P=0.094). There was a positive correlation between the difference (X) between the intraoperative measurement value and the preoperative plan value of FFA and the difference (Y) between the postoperative WBL ratio and the target alignment (r=0.536, P=0.015). After BMI stratification, X was an influential factor of Y in the low BMI group (P<0.05), but X was not an influential factor of Y in the high BMI group (P>0.05). Conclusion Intraoperative FFA and TFA can predict coronal limb alignment after MOWHTO. FFA and TFA can predict more preciselyfor patients with BMI≤25.81 kg/m2.