In order to study rheologic property of bile flow between gallbladder and biliary duct during biliary obstruction,we made a model of complete biliary obstruction(CBO)in dogs.The results showed that:①The behavior of bile flow between gallbladder and biliary duct in noemal dogs belonged to Casson flow;②When the duration of CBO prolonged,the behavior of bile flow between gallbladder and biliary tract in the CBO dogs still belonged to Casson flow.The changes of yield stress and apparent viscosity at high or low shear rate in bile flow of the biliary duct were similar to that in bile flow of the gallbladder.
Decellularized tissue engineering scaffolds appear to have the properties of similar structure and mechanical characteristics to native tissues，good biocompatibility，suitability for cell adhesion，growth and angiogenesis induction，and non-immunogenicity. Genipin has anti-inflammatory，antithrombotic and antioxidative features which can considerably suppress vascular and endothelial inflammatory activation，increase mechanical strength of biological scaffolds，inhibit inflammatory response and decrease degradation rate of biological scaffolds. By cross-linking with decellularized matrices，Genipin can further improve corresponding performance of tissue engineering matrices，which is very helpful to promote the application of tissue engineering into clinical practice of cardiothoracic surgery. This review focuses on recent research process and possible prospects of Genipin cross-linking in tissue engineering in the field of cardiothoracic surgery.
Objective To explore the biomechanic effects of multi ple freeze-thaw on human allograft tendons. Methods Thirty tendons (24 flexor digitorum superficial is tendons and 6 flexor poll icis longus tendons) were harvested from 3 fresh cadaver donors and were divided into 6 groups randomly (fresh group; 1 cycle, 2 cycle, 3 cycle, 5 cycle, and 10 cycle freeze-thaw groups). There was 4 flexor digitorum superficial is tendons and 1 flexor poll icis longus tendon in each group. The structural and mechanical properties as well as viscoelastic change were estimated. Results The results of the structural and mechanical properties in 1 cycle, 2 cycle, and 3 cycle freeze-thaw groups were similar to that of the fresh group (P gt;0.05). The tendons in 5 cycle and 10 cycle freeze-thaw groups showed a significantly lower ultimate load and maximum stress when compared with those of fresh group (P lt; 0.05), but there was no significant difference in maximum tensile or maximum strain (P gt; 0.05). Moreover, the tendons in 5 cycle and 10 cycle freeze-thaw groups had a significant increase in viscoelastic properties when compared with fresh group (P lt; 0.05). Conclusion In the cryopreservation of tendon allografts, the cycle of freeze-thaw should not exceed 3 times. Multiple cycle freeze-thaw will weaken the biomechanical properties of tendon allografts, which make grafts easier to fatigue or even rupture.
Objective To prepare silver-containing hydroxyapatite coating (hydroxyapatite/Ag, HA/Ag) and investigate its antibacterial property and biocompatibil ity in vitro. Methods Vacuum plasma spraying technique was adopted to prepare HA/Ag coating on titanium alloy substrate (3% Ag). After incubating the HA/Ag and the HA coating under staphylococcus aureus and pseudomonas aeruginosa suspensions of 2% tryptic soy broth (TBS) medium for 2, 4 and 7 days, respectively, the biofilm on the coatings was examined by confocal laser scanning microscope, and the bacterial density and viable bacterial percentage of bacterial biofilm were calculated. Meanwhile, the micro-morphology of bacterial biofilm was observed by SEM, the cytotoxicity was detected via MTT and the biocompatibil ity of biofilm was evaluated by acute aemolysis test. Results Compared with HA coating, the bacterial biofilm’s thickness on the surface of HA/Ag coating witnessed no significant difference at 2 days after culture (Pgt; 0.05), but decreased obviously at 4 and 7 days after culture (P lt; 0.01). The bacterial density of the biofilm increased with time, but there was no significant difference between two coatings (P gt; 0.05) at 2, 4 and 7 days after culture. The viable bacterial percentage of the biofilms on the surface of HA/Ag coating decreased obviously compared with that of HA coating at 2, 4 and 7 days after cultureP lt; 0.01). The MTT notified the cytotoxic grade of both coatings was zero. The acute haemolysis assay showed that the hemolytic rate of HA/Ag and HA coating was 0.19% and 0.12%, respectively. Conclusion With good biocompatibil ity, significant antibacterial property against staphylococcus aureus and pseudomonas aeruginosa, no obvious cytotoxicity and no erythrocyte destruction, the vacuum plasma sprayed HA/Ag coating is a promising candidate for the surface of orthopedic metal implants to improve their osseointegration and antibacterial property.
Objective To investigate the effect of surface propertyof different polyether-ester block copolymers［poly(ethylene glycol-terephthalate)/poly(butylene terephthalate), PEGT/PBT］ on the growth of smooth muscle cells (SMCs) and endothelial cells(ECs). Methods Three kinds of copolymers were synthesized, which were 1000-T20 (group A), 1000PEGT70/PBT30 (group B) and 600PEGT70/PBT30 (group C). The water-uptake and contact angle of three polyether-ester membranes were determined. The canine aorta smooth muscle cells and external jugular vein endothelial cells were primarily harvested, subcultured, and then identified. The proliferation of SMCs and ECs on the different polyether-ester membranes were investigated. Results The water-uptake of three copolymers arranged as the sequence of group C＜group A＜group B, and contact angle as the sequence of group C＞group A＞group B, indicating group B being more hydrophilic. However, smooth musclecells andendothelial cells grew poorly on the membrane of group B after low density seeding, but proliferated well on the membranes of group A and group C. Conclusion In contrast with more hydrophilic 1000PEGT70/PBT30, moderately hydrophilic 1000-T20 and 600PEGT70/PBT30 has better compatibility with vascular cells. The above results indicate that the vascular cells can grow well on moderately hydrophilic PEGT/PBT and that PEGT/PBT can be used in vascular tissue engineering.
The study of mechanical properties on heart valves can provide an important theoretical basis for doctors to repair heart valves and prosthetic valve materials research. In this paper, we present the current status of the mechanical property study methods of heart valve, expound the methods and special requirements about uniaxial tensile test and biaxial tensile test of the heart valve, and further discuss several establishment methods of heart valve constitutive models. We also discuss the development trend of heart valve mechanics.
Mechanical properties and biological evaluation of buffalo horn material were examined in this study. The effects of sampling position of buffalo horn on mechanical properties were investigated with uniaxial tension and micron indentation tests. Meanwhile, the variation of element contents in different parts of buffalo horn was determined with elemental analysis, and the microstructure of the horn was measured with scanning electron microscopy. In addition, biological evaluation of buffalo horn was studied with hemolytic test, erythrocyte morphology, platelet and erythrocyte count, and implantation into mouse. Results showed that the buffalo horn had good mechanical properties and mechanical characteristic values of it gradually increased along with the growth direction of the horn, which may be closely related to its microstructure and element content of C, N, and S in different parts of the buffalo horn. On the other hand, because the buffalo horn does not have toxicity, it therefore does not cause hemolysis of erythrocyte and has a good affinity with it. Buffalo horn has good histocompatibility but meanwhile it may induce the platelet adhesion and aggregation. Even so, it does not continue to rise to induce a large number of platelet to aggregate with resulting blood clotting. Therefore, the buffalo horn material has been proved to possess good blood compatibility according to the preliminary evaluation.
To serve as carriers of cells and bioactive molecules, three-dimensional scaffolds play a key role in bone defect repair. The chemical component and microstructure of the scaffold can affect the mechanical properties and seed cells. A variety of fabrication techniques have been used in producing scaffolds, some made random porous structure, some created well-designed structure using rapid prototyping methods, and others prepared bio-derived materials as scaffolds. However, scaffolds may vary in their inner structure, mechanical properties and repairing efficiency as well because of different manufacturing methods. In this review, we overview the main achievements concerning the effects of material and microstructure on the mechanical performance, seed cells and defect repair of bone scaffolds.
Total hip replacement (THR) is replacing the prosthesis stem similar to human bone that takes advantage of the material with both good mechanical properties and biocompatibility to the damaged articular surface. Thus it can not only alleviate or even eliminate the pain but also effectively maintain the joint stability and freedom and restore its normal performance. Finite element analysis was used in this study to establish a 3D model of artificial hip stem, and explore its fatigue properties of different materials to ensure the safety and reliability. The calculating obtained two results of different metal hip prosthesis, including lifetime and deformation. The minimum service life of titanium prosthesis reaches 568 million times, which satisfies ISO standards, while the stainless steel does not suit to be a prosthesis material.
ObjectiveTo improve the poor mechanical strength of porous ceramic scaffold, an integrated method based on three-dimensional (3-D) printing technique is developed to incorporate the controlled double-channel porous structure into the polylactic acid/β-tricalcium phosphate (PLA/β-TCP) reinforced composite scaffolds (double-channel composite scaffold) to improve their tissue regeneration capability and the mechanical properties. MethodsThe designed double-channel structure inside the ceramic scaffold consisted of both primary and secondary micropipes, which parallel but un-connected. The set of primary channels was used for cell ingrowth, while the set of secondary channels was used for the PLA perfusion. Integration technology of 3-D printing technique and gel-casting was firstly used to fabricate the double-channel ceramic scaffolds. PLA/β-TCP composite scaffolds were obtained by the polymer gravity perfusion process to pour PLA solution into the double-channel ceramic scaffolds through the secondary channel set. Microscope, porosity, and mechanical experiments for the standard samples were used to evaluate the composite properties. The ceramic scaffold with only the primary channel (single-channel scaffold) was also prepared as a control. ResultsMorphology observation results showed that there was no PLA inside the primary channels of the double-channel composite scaffolds but a dense interface layer between PLA and β-TCP obviously formed on the inner wall of the secondary channels by the PLA penetration during the perfusion process. Finite element simulation found that the compressive strength of the double-channel composite scaffold was less than that of the single-channel scaffold; however, mechanical tests found that the maximum compressive strength of the double-channel composite scaffold[(21.25±1.15) MPa] was higher than that of the single-channel scaffold[(9.76±0.64) MPa]. ConclusionThe double-channel composite scaffolds fabricated by 3-D printing technique have controlled complex micropipes and can significantly enhance mechanical properties, which is a promising strategy to solve the contradiction of strength and high-porosity of the ceramic scaffolds for the bone tissue engineering application.