Objectives To assess the clinical effectiveness of non-penetrating trabecular surgery versus trabeculectomy for open angle glaucoma. Methods We searched the Cochrane Central Register of Controlled Trials (issue 2, 2007), MEDLINE (1966 to May 2008), EMbase (1980 to May 2008), and CMB-disk (1979 to May 2008). We also hand searched relevant journals and conference proceedings. Data were extracted by two reviewers independently using an extraction form. The Cochrane Collaboration’s RevMan 5.0 software was used for statistical analysis. Results Three RCTs involving 127 participants (144 eyes) with previously untreated open angle glaucoma were included. Meta-analysis showed that compared with non-penetrating trabecular surgery, trabeculectomy increased the proportion of patients with reduced postoperative intraocular pressure (WMD2.78, 95%CI 1.41 to 4.15), improved the operation success rate (RR 0.53, 95%CI 0.37 to 0.77), and reduced the use of postoperative antiglaucoma medication (WMD 0.96, 95%CI 0.84 to 1.08). Non-penetrating trabecular surgery reduced the incidence of postoperative complications (RR 17.00, 95%CI 8.36 to 26.00). Conclusion Since the sample sizes of the included trials are relatively small, and the two procedures are also related to progressive visual field loss and optic disk damage, more well-designed large-scale RCTs are required.
It has been found for more than one century that when experiencing mechanical loading, the structure of bone will adapt to the changing mechanical environment, which is called bone remodeling. Bone remodeling is charaterized as two processes of bone formation and bone resorption. A large number of studies have confirmed that the shear stress is resulted from interstitial fluid flow within bone cavities under mechanical loading and it is the key factor of stimulating the biological responses of bone cells. This review summarizes the major research progress during the past years, including the biological response of bone cells under fluid flow, the pressure within bone cavities, the theoretical modeling, numerical simulation and experiments about fluid flow within bone, and finally analyzes and predicts the possible tendency in this field in the future.
ObjectiveTo investigate the three-dimensional structure of proximal femoral trabeculae, analyze the formation mechanism, and explore its relationship with the occurrence and treatment of proximal femoral fractures.MethodsSix cadaver adult femur specimens were harvested and the gross specimens containing both trabecular system and cortical bone were established by hand scraping. All samples were scanned by micro-CT and the CT images were input into Mimics18.0 software to establish the digital proximal femoral model containing trabecular structure. The spatial distribution of trabecular system was observed, and the relations between trabecular bone and the proximal femur surface and related anatomical landmarks were analyzed in digital models.ResultsThe gross specimen and digital models of trabecular system were successfully established. The trabecular system of proximal femur could be divided into two groups: the horizontal and vertical trabecular. The horizontal trabecular arose from the base of greater trochanter, gone along the direction of femoral neck, and terminated at the center of femoral head. The vertical trabecular began from the base of lesser trochanter and femoral calcar, gone radically upward, and reached the femoral head. The average distance of the horizontal trabecular to the greater trochanter was 22.66 mm (range, 17.3-26.8 mm). In the femoral head, the horizontal trabecula and the vertical trabecula were fused into a kind of sphere, and the distances from the horizontal trabecula to the surface of the femoral head vary in different sections. The average distance of trabecular ball to the femoral head surface was 6.88 mm (range, 6.3-7.2 mm) in sagittal plane, 6.32 mm (range, 5.8-7.6 mm) in coronal plane, and 6.30 mm (range, 5.6-6.3 mm) in cross section. The vertical and horizontal trabeculae intersect obliquely, and the average angle of horizontal trabecular and vertical one was 140.67° (range, 129-150°).ConclusionThe trabecular system exhibits a unique spatial configuration, which is the main internal support of proximal femur. Restoration of the integrity of trabecular structure is the important goal of proximal femoral fractures.
ObjectiveTo explore the effect of icariin on early steroid-induced osteonecrosis of the femoral head in rabbits.MethodsFifty mature New Zealand rabbits (weighing, 2.5-3.0 kg) were randomly divided into control group (n=10), model group (n=20), and experimental group (n=20). The rabbits of model and experimental groups were injected with lipopolysaccharide and methylprednisolone to establish the animal model of early steroid-induced osteonecrosis of the femoral head. The rabbits of experimental group were feeded with icariin solution once a day for 6 weeks since the first injection of methylprednisolone, whereas the rabbits of control and model groups were given normal saline at the same time points. The left femoral heads were removed after 6 weeks and gross morphological features were evaluated. Micro-CT scan was performed to analyze the trabecular microstructure with the following parameters: trabecular bone volume to total volume (BV/TV), trabecular number (Tb.N), trabecular thickness (Tb.Tn), and trabecular separation (Tb.Sp). The Micro-CT scan was also converted to three-dimensional reconstruction images for observation. HE staining was applied to observe the trabecular structure and morphological changes of osteocytes and marrow adipocytes. It was also used to determine whether the samples of femoral heads occurred osteonecrosis based on the criteria for pathological diagnosis, and calculate the rate of empty lacunae.ResultsSeven rabbits died during the study, and 9, 16, and 18 rabbits in the control, model, and experimental groups, respectively, enrolled the final analysis. Compared with control group, the femoral head collapse and trabecular breaks were more obvious, and the trabeculae were sparse with irregular arrangement in the model group according to the results of gross observation, Micro-CT scan, and three-dimensional reconstruction images. But in the experimental group, the surface of femoral head was slight shrinking without obvious collapse, and the degeneration of trabecular structure was mild. According to bone microstructures analysis, the Tb.N, Tb.Tn, and BV/TV of femoral head in model and experimental groups were lower than those in control group, while the Tb.Sp in the model and experimental groups were significantly higher. The Tb.N, Tb.Tn, and BV/TV of femoral head in experimental group were higher than those in model group, while the Tb.Sp in the experimental group was significantly lower. The differences between groups were all significant (P<0.05). In the model group, HE staining showed that the number of osteocytes reduced, the number of empty lacunae increased, and the marrow adipocytes piled up in the space between femoral trabeculae, some even mashed together like a cyst. In the experimental group, the trabecular structure was still relatively complete compared with model group, no obvious apoptosis of osteocytes was observed, the size and number of adipocytes were basically normal. None of the animals in control group occurred osteonecrosis of the femoral head based on the criteria for pathological diagnosis, and the incidence of osteonecrosis were 81.3% (13/16) in the model group and 66.7% (12/18) in the experimental group, and the difference was not significant (P=0.448). The rate of empty lacunae of osteonecrotic femoral heads in the model group was 33.1%±1.4%, which was higher than that in experimental group (18.9%±0.8%) and in control group (12.7%±1.5%), and the differences between groups were significant (P<0.05).ConclusionThe icariin has a protective effect on the early steroid-induced osteonecrosis of the femoral head in rabbits, which can decrease osteocytes apoptosis, improve the bone microstructure, and delay such disease processes.
Fluid shear stress (FSS) caused by interstitial fluid flow within trabecular bone cavities under mechanical loading is the key factor of stimulating biological response of bone cells. Therefore, to investigate the FSS distribution within cancellous bone is important for understanding the transduction process of mechanical forces within alveolar bone and the regulatory mechanism at cell level during tooth development and orthodontics. In the present study, the orthodontic tooth movement experiment on rats was first performed. Finite element model of tooth-periodontal ligament-alveolar bone based on micro computed tomography (micro-CT) images was established and the strain field in alveolar bone was analyzed. An ideal model was constructed mimicking the porous structure of actual rat alveolar bone. Fluid flow in bone was predicted by using fluid-solid coupling numerical simulation. Dynamic occlusal loading with orthodontic tension loading or compression loading was applied on the ideal model. The results showed that FSS on the surface of the trabeculae along occlusal direction was higher than that along perpendicular to occlusal direction, and orthodontic force has little effect on FSS within alveolar bone. This study suggests that the orientation of occlusal loading can be changed clinically by adjusting the shape of occlusal surface, then FSS with different level could be produced on trabecular surface, which further activates the biological response of bone cells and finally regulates the remodeling of alveolar bone.
Objective To evaluate the effectiveness of using titanium alloy trabecular bone three-dimensional (3D) printed artificial vertebral body in treating cervical ossification of the posterior longitudinal ligament (OPLL). Methods A retrospective analysis was conducted on clinical data from 45 patients with cervical OPLL admitted between September 2019 and August 2021 and meeting the selection criteria. All patients underwent anterior cervical corpectomy and decompression, interbody bone graft fusion, and titanium plate internal fixation. During operation, 21 patients in the study group received titanium alloy trabecular bone 3D printed artificial vertebral bodies, while 24 patients in the control group received titanium cages. There was no significant difference in baseline data such as gender, age, disease duration, affected segments, or preoperative pain visual analogue scale (VAS) score, Japanese Orthopaedic Association (JOA) score, Neck Disability Index (NDI), vertebral height, and C2-7 Cobb angle (P>0.05). Operation time, intraoperative blood loss, and occurrence of complications were recorded for both groups. Preoperatively and at 3 and 12 months postoperatively, the functionality and symptom relief were assessed using JOA scores, VAS scores, and NDI evaluations. The vertebral height and C2-7 Cobb angle were detected by imaging examinations and the implant subsidence and intervertebral fusion were observed. Results The operation time and incidence of complications were significantly lower in the study group than in the control group (P<0.05), while the difference in intraoperative blood loss between the two groups was not significant (P>0.05). All patients were followed up 12-18 months, with the follow-up time of (14.28±4.34) months in the study group and (15.23±3.54) months in the control group, showing no significant difference (t=0.809, P=0.423). The JOA score, VAS score, and NDI of the two groups improved after operation, and further improved at 12 months compared to 3 months, with significant differences (P<0.05). At each time point, the study group exhibited significantly higher JOA scores and improvement rate compared to the control group (P<0.05); but there was no significantly difference in VAS score and NDI between the two groups (P>0.05). Imaging re-examination showed that the vertebral height and C2-7 Cobb angle of the two groups significantly increased at 3 and 12 months after operation (P<0.05), and there was no significant difference between 3 and 12 months after operation (P>0.05). At each time point, the vertebral height and C2-7 Cobb angle of the study group were significantly higher than those of the control group (P<0.05), and the implant subsidence rate was significantly lower than that of the control group (P<0.05). However, there was no significant difference in intervertebral fusion rate between the two groups (P>0.05). Conclusion Compared to traditional titanium cages, the use of titanium alloy trabecular bone 3D-printed artificial vertebral bodies for treating cervical OPLL results in shorter operative time, fewer postoperative complications, and lower implant subsidence rates, making it superior in vertebral reconstruction.