1. |
HE Zhaoming. Mitral valve mechanics and function[J]. 医用生物力学,2010,25(S1):47-48.
|
2. |
BIIIIAR K L, SACKS M S. A method to quantify the fiber kinematics of planar tissues under biaxial stretch[J].J Biomech. 1997, 30(7):753-756.
|
3. |
PATEL S S,MORSI Y S, Making of functional tissue engineered heart valve[C] //26th Southern Biomedical Engineering Conference.Maryland,USA: 2010: 180-182.
|
4. |
HSIAO A, LUSTIG M, ALLEY M T, et al. Evaluation of valvular insufficiency and shunts with parallel-imaging compressed-sensing 4D phase-contrast MR imaging with stereoscopic 3D velocity-fusion volume-rendered visualization [J]. Radiology, 2012, 265(1):87-95.
|
5. |
陈善良,许莉,王雪梅,等.戊二醛鞣制驴心包与牛心包的体外力学性能比较[J]. 山东大学学报(医学版),2012,50(6):42-45.
|
6. |
SANCHEZ-AREVALO F M, FARFAN M, COVARRUBIAS D, et al. The micromechanical behavior of lyophilized glutaraldehyde-treated bovine pericardium under uniaxial tension[J]. J Mech Behav Biomed Mater, 2010,3(8):640-646.
|
7. |
刁颖敏. 组织工程瓣的拉伸试验及力学参数的选取[J].力学季刊,2004,25(1):140-144.
|
8. |
陈炜生,杨胜生,陈龙,等.10名正常人二尖瓣膜的一维拉伸测试[J].福建医药杂志,2001,23(4):89-91.
|
9. |
PROT V, SKALLERUD B , SOMMER G , et al. On modelling and analysis of healthy and pathological human mitral valves: two case studies [J]. J Mech Behav Biomed Mater, 2010,3(2):167-177.
|
10. |
BILLIAR K L, SACKS M S. Biaxial mechanical properties of the natural and glutaraldehyde treated aortic valve cusp--Part Ⅰ: Experimental results[J]. J Biomech Eng, 2000,122(1):23-30.
|
11. |
罗华安,王化明,游有鹏.超弹性膜的等轴拉伸试验方法及仿真[J].华南理工大学学报(自然科学版),2011,39(4):56-61.
|
12. |
崔彬,刘迎龙,谢宁,等.同种异体人心脏主动脉与肺动脉瓣膜的生物力学比较[J].中国组织工程研究与临床康复,2010,14(18):3352-3354.
|
13. |
王树志,李晓阳,李坤.人体主动脉弓周向应力的非线性数值模型研究[J].医用生物力学,2011,26(1):43-50.
|
14. |
ALBANNA M Z,BOU-AKL T H,WALTERS H L ,et al. Improving the mechanical properties of chitosan-based heart valve scaffolds using chitosan fibers[J]. J Mech Behav Biomed Mater, 2012, 5(1):171-180.
|
15. |
王春敏. 针织复合材料力学性能的研究[J]. 材料导报,2011,25(S2):277-280.
|
16. |
SZOSTKIEWIEZ C,HAMELIN P. Stiffness identifieation and tearing analysis for coated membranes under biaxial loads[J]. Journal of Industrial Textiles,2000,30(2):128-145.
|
17. |
刘君,林小军.生物软组织的正交各向异性超弹性材料模型及数值模拟[J].兰州工业高等专科学校学报,2011,18(3):52-57.
|
18. |
MAY-NEWMAN K, YIN F C, Biaxial mechanical behavior of excised porcine mitral valve[J]. Am J Physiol, 1995, 269(4 Pt 2): H1319-H1327.
|
19. |
罗华安,赵大旭.基于NI-DAQ的双轴拉伸试验平台的设计和实现[J].机床与液压,2010,38(22):9-12.
|
20. |
NATALI A N, PAVAN P G, SCARPA C. Numerical analysis of tooth mobility: formulation of a non-linear constitutive law for the periodontal ligament[J].Dent Mater, 2004,20(7):623-629.
|
21. |
田聪,万荣欣,刘欣, 等.生物交联剂京尼平交联牛心包生物支架材料的性能[J].中国生物医学工程学报,2011,30(2):281-286.
|
22. |
BILLIAR K L, SACKS M S. Biaxial mechanical properties of the native and glutaraldehyde-treated aortic valve cusp: Part Ⅱ--A structural constitutive model[J]. J Biomech Eng, 2000,122(4):327-335.
|
23. |
XU H, QUAN Y, HUA C, et al. Influence of material thickness to the dynamic mechanical properties of bioprosthetic heart valve[J].Adv Mater Research, 2012,502(7): 479-484.
|
24. |
QUAN Y, ZHU H Y, HUA C.Construction parametric model and stress analysis of the biopresthetic heart valve[C]//2nd IEEE International Conference on Information Management and Engineering. China: 2010:141-145.
|
25. |
朱海燕. 基于ANSYS/LS-DYNA的生物瓣膜动态力学性能分析[D]. 济南: 山东大学, 2011.
|
26. |
彭礼清,余建群,杨志刚,等.双源CT评价正常肺动脉瓣形态学及动态特征[J]. 生物医学工程学杂志,2012,29(5):862-866.
|
27. |
KOURSERA C A, WOOD N B, SEED W A, et al. A numerical study of aortic flow stability and comparison with in vivo flow measurements [J]. J Biomech Eng, 2013, 135(1): 011003.
|