1. |
EI-LABOUDI A, MISRA S, MRTINEAU M, et al. Intentional large insulin overdose captured on a continuous glucose monitor:a novel case report[J]. J Diabetes Sci Technol, 2015, 9(4):929-931.
|
2. |
BATTELINO T, OMLADI AČU J Š, PHILLIP M. Closed loop insulin delivery in diabetes[J]. Best Pract Res Clin Endocrinol Metab, 2015, 29(3):315-325.
|
3. |
KREYSA G, OTA K, SAVINELL RF. Encyclopedia of Applied Electrochemistry[M]. New York:Springer New York Press, 2012:479-485.
|
4. |
SIDES C R, STENKEN J A. Microdialysis sampling techniques applied to studies of the foreign body reaction[J]. Eur J Pharm Sci, 2014, 57(SI):74-86.
|
5. |
VEZOUVIOU E, LOWE C R. A near infrared holographic glucose sensor[J]. Biosens Bioelectron, 2015, 68:371-381.
|
6. |
CHEN Chao, XIE Qingji, YANG Dawei, et al. Recent advances in electrochemical glucose biosensors:a review[J]. RSC Adv, 2013, 3(14):4473-4491.
|
7. |
ZHU Zhigang, GARCIA-GANCEDO L, FLEWITT A J, et al. A critical review of glucose biosensors based on carbon nanomaterials:carbon nanotubes and graphene[J]. Sensors (Basel), 2012, 12(5):5996-6022.
|
8. |
NICHOLS S P, KOH A, STORM W L, et al. Biocompatible materials for continuous glucose monitoring devices[J]. Chem Rev, 2013, 113(4):2528-2549.
|
9. |
ANDERSON J M, RODRIGUEZ A, CHANG D T. Foreign body reaction to biomaterials[J]. Semin Immunol, 2008, 20(2):86-100.
|
10. |
GIFFORD R, KEHOE J J, BARNES S L, et al. Protein interactions with subcutaneously implanted biosensors[J]. Biomaterials, 2006, 27(12):2587-2598.
|
11. |
KLUEH U, QIAO Yi, FRAILEY J T, et al. Impact of macrophage deficiency and depletion on continuous glucose monitoring in vivo[J]. Biomaterials, 2014, 35(6):1789-1796.
|
12. |
KLUEH U, FRAILEY J T, QIAO Yi, et al. Cell based metabolic barriers to glucose diffusion:Macrophages and continuous glucose monitoring[J]. Biomaterials, 2014, 35(10):3145-3153.
|
13. |
KOH A, LU Yuan, SCHOENFISCH M H. Fabrication of nitric oxide-releasing porous polyurethane membranes-coated needle-type implantable glucose biosensors[J]. Anal Chem, 2013, 85(21):10488-10494.
|
14. |
余江渊, 朱志刚, 陈诚, 等.基于螺旋型铂铱合金电极的植入式葡萄糖生物传感器[J].传感技术学报, 2016, 29(1):9-14.
|
15. |
ZHU Zhigang, GARCIA-GANCEDO L, FLEWITT A J, et al. Design of carbon nanotube fiber microelectrode for glucose biosensing[J]. J Chem Technol Biotechnol, 2012, 87(2):256-262.
|
16. |
Zhu Zhigang, GARCIA-GANCEDO L, CHEN C, et al. Enzyme-free glucose biosensor based on low density CNT forest grown directly on a Si/SiO2 substrate[J]. Sens Actuators B Chem, 2013, 178:586-592.
|
17. |
蔡丽俊, 朱志刚, 余江渊, 等.面向医疗物联网的便携式连续血糖监测系统研究[J].传感技术学报, ……(刊印中).
|
18. |
WANG Yan, VADDIRAJU S, GU Bing, et al. Foreign body reaction to implantable biosensors:effects of tissue trauma and implant size[J]. J Diabetes Sci Technol, 2015, 9(5):966-977.
|
19. |
NOVAK M T, REICHERT W M. Modeling the physiological factors affecting glucose sensor function in vivo[J]. J Diabetes Sci Technol, 2015, 9(5):993-998.
|
20. |
MOUSSY F, HARRISON D J, RAJOTTE R V. A miniaturized Nafion-based glucose sensor:in vitro and in vivo evaluation in dogs[J]. Int J Artif Organs, 1994, 17(2):88-94.
|
21. |
CHEN Dajing, WANG Cang, CHEN Wei, et al. PVDF-Nafion nanomembranes coated microneedles for in vivo transcutaneous implantable glucose sensing[J]. Biosens Bioelectron, 2015, 74:1047-1052.
|
22. |
WANG Ning, BURUGAPALLI K, SONG Wenhui, et al. Electrospun fibro-porous polyurethane coatings for implantable glucose biosensors[J]. Biomaterials, 2013, 34(4):888-901.
|
23. |
WANG Ning, BURUGAPALLI K, SONG Wenhui, et al. Tailored fibro-porous structure of electrospun polyurethane membranes, their size-dependent properties and trans-membrane glucose diffusion[J]. J Memb Sci, 2013, 427(15):207-217.
|
24. |
YU B Z, WANG C Y, JU Y M, et al. Use of hydrogel coating to improve the performance of implanted glucose sensors[J]. Biosens Bioelectron, 2008, 23(8):1278-1284.
|
25. |
LIN G, CHANG S, HAO H, et al. Osmotic swelling pressure response of smart hydrogels suitable for chronically implantable glucose sensors[J]. Sens Actuators B Chem, 2010, 144(1):332-336.
|
26. |
WANG Yan, PAPADIMITRAKOPOULOS F, BURGESS D J. Polymeric "smart" coatings to prevent foreign body response to implantable biosensors[J]. J Control Release, 2013, 169(3):341-347.
|
27. |
WANG Yan, VADDIRAJU S, QIANG Liangliang, et al. Effect of dexamethasone-loaded poly(lactic-co-glycolic acid) microsphere/poly(vinyl alcohol) hydrogel composite coatings on the basic characteristics of implantable glucose sensors[J]. J Diabetes Sci Technol, 2012, 6(6):1445-1453.
|
28. |
VADDIRAJU S, LEGASSEY A, QIANG Liangliang, et al. Enhancing the sensitivity of needle-implantable electrochemical glucose sensors via surface rebuilding[J]. J Diabetes Sci Technol, 2013, 7(2):441-451.
|
29. |
VALLEJO-HELIGON S G, KLITZMAN B, REICHERT W M. Characterization of porous, dexamethasone-releasing polyurethane coatings for glucose sensors[J]. Acta Biomater, 2014, 10(11):4629-4638.
|
30. |
KASTELLORIZIOS M, PAPADIMITRAKOPOULOS F, BURGESS D J. Multiple tissue response modifiers to promote angiogenesis and prevent the foreign body reaction around subcutaneous implants[J]. Journal of Controlled Release, 2015, 214):103-111.
|
31. |
JIA Wenzhi, WANG Kang, XIA Xinghua. Elimination of electrochemical interferences in glucose biosensors[J]. TrAC Trends in Analytical Chemistry, 2010, 29(4):306-318.
|
32. |
ZHANG Y, WILSON G S. In vitro and in vivo evaluation of Oxygen effects on a glucose oxidase based implantable glucose sensor[J]. Anal Chim Acta, 1993, 281(3):513-520.
|
33. |
GOUGH D A, LUCISANO J Y, TSE P H. Two-dimensional enzyme electrode sensor for glucose[J]. Anal Chem, 1985, 57(12):2351-2357.
|
34. |
SOTO R J, PRIVETT B J, SCHOENFISCH M H. In vivo analytical performance of nitric oxide-releasing glucose biosensors[J]. Anal Chem, 2014, 86(14):7141-7149.
|
35. |
LIN P, LIN C W, MANSOUR R, et al. Improving biocompatibility by surface modification techniques on implantable bioelectronics[J]. Biosens Bioelectron, 2013, 47:451-460.
|
36. |
HARRIS J M, REYES C, LOPEZ G P. Common causes of glucose oxidase instability in in vivo biosensing:a brief review[J]. J Diabetes Sci Technol, 2013, 7(4):1030-1038.
|
37. |
Qin YH, Howlader M, Deen MJ, et al. Polymer integration for packaging of implantable sensors. Sens Actuators B Chem, 2014, 202:758-778.
|