1. |
Kadkhodapour J, Montazerian H, Darabi A C, et al. The relationships between deformation mechanisms and mechanical properties of additively manufactured porous biomaterials. J Mech Behav Biomed Mater, 2017, 70: 28-42.
|
2. |
Weißmann V, Bader R, Hansmann H, et al. Influence of the structural orientation on the mechanical properties of selective laser melted Ti6Al4V open-porous scaffolds. Materials & Design, 2016, 95: 188-197.
|
3. |
Cuadrado A, Yánez A, Martel O, et al. Influence of load orientation and of types of loads on the mechanical properties of porous Ti6Al4V biomaterials. Materials & Design, 2017, 135: 309-318.
|
4. |
Kadkhodapour J, Montazerian H, Darabi A, et al. Failure mechanisms of additively manufactured porous biomaterials: effects of porosity and type of unit cell. J Mech Behav Biomed Mater, 2015, 50: 180-191.
|
5. |
施建平. 面向骨植入体3D打印的多孔结构构建研究. 南京: 东南大学, 2018.
|
6. |
Wang Xiaojian, Xu Shanqing, Zhou Shiwei, et al. Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review. Biomaterials, 2016, 83: 127-141.
|
7. |
Li J, Chen D S, Luan H Q, et al. Numerical evaluation and prediction of porous implant design and flow performance. Biomed Res Int, 2018, 2018: 1215021.
|
8. |
Li J, Chen D S, Fan Y B. Evaluation and prediction of mass transport properties for porous implant with different unit cells: a numerical study. Biomed Res Int, 2019: 3610785.
|
9. |
Zhang L, Song B, Yang L, et al. Tailored mechanical response and mass transport characteristic of selective laser melted porous metallic biomaterials for bone scaffolds. Acta Biomater, 2020, 112: 298-315.
|
10. |
Zhang X Y, Fang G, Leeflang S, et al. Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials. Acta Biomater, 2019, 84: 437-452.
|
11. |
Castro A G, Pires T, Santos J E, et al. Permeability versus design in TPMS scaffolds. Materials, 2019, 12(8): 1313.
|
12. |
Zhang X Y, Yan X C, Fang G, et al. Biomechanical influence of structural variation strategies on functionally graded scaffolds constructed with triply periodic minimal surface. Additive Manufacturing, 2020, 32: 101015.
|
13. |
Montazerian H, Mohamed M, Montazeri M M, et al. Permeability and mechanical properties of gradient porous PDMS scaffolds fabricated by 3D-printed sacrificial templates designed with minimal surfaces. Acta Biomater, 2019, 9: 149-160.
|
14. |
Zhianmanesh M, Varmazyar M, Montazerian H. Fluid permeability of graded porosity scaffolds architectured with minimal surfaces. ACS Biomater Sci Eng, 2019, 5(3): 1228-1237.
|
15. |
Ma S H, Song K L, Lan J, et al. Biological and mechanical property analysis for designed heterogeneous porous scaffolds based on the refined TPMS. J Mech Behav Biomed Mater, 2020, 107: 103727.
|
16. |
Zhang L, Feih S, Daynes S, et al. Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loading. Additive Manufacturing, 2018, 23: 505-515.
|
17. |
Kadkhodapour J, Montazerian H, Raeisi S. Investigating internal architecture effect in plastic deformation and failure for TPMS-based scaffolds using simulation methods and experimental procedure. Mater Sci Eng C Mater Biol Appl, 2014, 43: 587-597.
|
18. |
Montazerian H, Davoodi E, Asadi-eydivand M, et al. Porous scaffold internal architecture design based on minimal surfaces: a compromise between permeability and elastic properties. Materials & Design, 2017, 126: 98-114.
|
19. |
Yu G S, Li Z B, Li S J, et al. The select of internal architecture for porous Ti alloy scaffold: a compromise between mechanical properties and permeability. Materials & Design, 2020, 192: 108754.
|
20. |
Yang L, Yan C Z, Fan H Y, et al. Investigation on the orientation dependence of elastic response in Gyroid cellular structures. J Mech Behav Biomed Mater, 2019, 90: 73-85.
|
21. |
Ma S, Tang Q, Feng Q X, et al. Mechanical behaviours and mass transport properties of bone-mimicking scaffolds consisted of gyroid structures manufactured using selective laser melting. J Mech Behav Biomed Mater, 2019, 93: 158-169.
|
22. |
Ali D, Ozalp M, Blanquer S, et al. Permeability and fluid flow-induced wall shear stress in bone scaffolds with TPMS and lattice architectures: a CFD analysis. European Journal of Mechanics - B/Fluids, 2020, 79: 376-385.
|
23. |
Melchels F P, Bertoldi K, Gabbrielli R, et al. Mathematically defined tissue engineering scaffold architectures prepared by stereolithography. Biomaterials, 2010, 31(27): 6909-6916.
|
24. |
Olivares A L, Marsal E, Planell J A, et al. Finite element study of scaffold architecture design and culture conditions for tissue engineering. Biomaterials, 2009, 30(30): 6142-6149.
|
25. |
Zhang X B, Gong H. Simulation on tissue differentiations for different architecture designs in bone tissue engineering scaffold based on cellular structure model. J Mech Med Biol, 2015, 15(03): 1550028.
|
26. |
LI Y, Jahr H, Pavanram P, et al. Additively manufactured functionally graded biodegradable porous iron. Acta Biomater, 2019, 96: 646-661.
|
27. |
Yu S X, Sun J X, Bai J M. Investigation of functionally graded TPMS structures fabricated by additive manufacturing. Materials & design, 2019, 182: 108021.
|
28. |
Zhou H L, Zhao M, Ma Z B, et al. Sheet and network based functionally graded lattice structures manufactured by selective laser melting: design, mechanical properties, and simulation. International Journal of Mechanical Sciences, 2020, 175: 105480.
|
29. |
Melchels F P, Tonnarelli B, Olivares A L, et al. The influence of the scaffold design on the distribution of adhering cells after perfusion cell seeding. Biomaterials, 2011, 32(11): 2878-2884.
|
30. |
Prendergast P J, Huiskes R, Soballes K. Biophysical stimuli on cells during tissue differentiation at implant interfaces. J Biomech, 1997, 30(6): 539-548.
|
31. |
徐高峰. 聚乳酸接骨板与钢板互锁治疗股骨远端粉碎性骨折的实验研究. 中国人民解放军第一军医大学, 2003.
|
32. |
Liu F, Mao Z F, Zhang P, et al. Functionally graded Abbasi in multiple patterns: new design method, physical and mechanical properties. Materials & design, 2018, 160: 849-860.
|
33. |
Beaudoin A J, Mihalko W M, Krause W R. Finite element modelling of polymethylmethacrylate flow through cancellous bone. J Biomech, 1991, 24(2): 127-136.
|
34. |
Nauman E A, Fong K, Keaveny T M. Dependence of intertrabecular permeability on flow direction and anatomic site. Ann Biomed Eng, 1999, 27(4): 517-524.
|