Objective To observe the effect of cationic liposomal ceftazidime (CLC) combined with nano-hydroxyapatite/β-tricalcium phosphate (n-HA/β-TCP) in the treatment of chronic osteomyelitis of rabbits. Methods Thirty healthy New Zealand white rabbits (4-6 months old; weighing, 2-3 kg) were selected to prepare the chronic osteomyelitis models. After 4 weeks, the gross observation, X-ray examination, and bacteriological and histopathological examinations were done; the models were made successfully in 27 rabbits. Of 27 rabbits, 24 were randomly divided into 4 groups (n=6): only debridement was performed in group A; ceftazidime was given (90 mg/kg), twice a day for 8 weeks after debridement in group B; ceftazidime and n-HA/β-TC were implanted after debridement in group C; and CLC and n-HA/β-TCP were implanted after debridement in group D. Before and after treatments, X-ray examination was done, and Norden score was recorded. At 8 weeks after treatment, the specimens were harvested for gross observation and for gross bone pathological score (GBPS) using Rissing standard; half of the specimens was used for histological observation and Smeltzer scoring, the other half for bacteriological examination and calculation of the positive rate of bacteria culture. Results At 8 weeks after treatment, Norden score of group D was significantly lower than that of groups A, B, and C (P lt; 0.05), but no significant difference was found among groups A, B, and C (P gt; 0.05). At 8 weeks after treatment, sinus healed in groups C and D, but sinus was observed in groups A and B; the GBPS scores of groups C and D were significantly lower than those of groups A and B (P lt; 0.05). The Smeltzer scores of groups C and D were significantly lower than those of groups A and B (P lt; 0.05). The positive rates of bacteria culture of groups C (0) and D (0) were significantly lower than those of group A (25.0%) and group B (16.7%) (P lt; 0.05). Conclusion CLC combined with n-HA/β-TCP has good effect in treating chronic osteomyelitis of rabbits, and it has better effect in treating chronic osteomyelitis of rabbits than ceftazidime with n-HA/β-TCP.
Objective To investigate the ability of plateletrich plasma(PRP) combined with cells and artificial bone in accelerating the repair of bone defect. Methods The marrow stromal stem cells (MSCs) of rabbit were cultured and induced into the osteoblast-like cells in vitro. PRP was produced with low-density twice centrifugations. Forty-eight New Zealand rabbits were made 1.2 cm bilateral radius defect models and divided into 4 groups averagely at random: group A(left:PRP／MSCs／β-tricalcium phosphate(β-TCP), right: MSCs／β-TCP), group B (left:autoradius, right: PRP／MSCs／β-TCP)； group C (left:autoradius,right: MSCs／β-TCP), and group D(left:PRP／β-TCP; right:β-TCP). At 2, 6 and 12 weeks after operation， the repair of bone defect was evaluated by the generalobservation, histology, biomechanics and histomorphology. Results There was a stable platelet concentration in PRP and it was about 5.45±0.23 times of whole blood. In the aspect of bone bridge and conture of the defects, at 2 and 6 weeks, PRP／MSCs／β-TCP and MSCs／β-TCP displayed asimilar outcome and were less than auto in general sample and X-ray;at12 weeks，PRP／MSCs／β-TCP was similar to autoradius and better than MSCs／β-TCP.in the aspect of quantity and quality of bone formation，histology showed that PRP／MSCs／β-TCP and autoradius were better than MSCs／β-TCP（P＜0.05），and there was nosignificantdifference between PRP／MSCs／β-TCP and autoradius（P＞0.05）. At 2 and 6 weeks，there was no significant difference between PRP／β-TCP and β-TCP（P＞0.05）。At 12 weeks，PRP／β-TCP was better than β-TCP（P＜0.05）. In the aspect of intensity f bone formation，at 6 and 12 weeks，PRP／MSCs／β-TCP and autoradiuswere better than MSCs／β-TCP（P＜0.05）. At 6 weeks，autoradius was better than PRP／MSCs／β-TCP（P＜0.05）. At 12 weeks，there was no significant difference between PRP／MSCs／β-TCP and auto（P＞0.05）. PRP／TCP and β-TCP had no significant difference at 12 weeks（P＞0.05）. Conclusion PRP／MSCs／β-TCP demonstrated excellent ability of forming bone in experiment. PRP was most likely to accelerate the repair of bone defect through increasing the activity of proliferation and differentiationof MSCs and osteoblasts.
ObjectiveTo improve the poor mechanical strength of porous ceramic scaffold, an integrated method based on three-dimensional (3-D) printing technique is developed to incorporate the controlled double-channel porous structure into the polylactic acid/β-tricalcium phosphate (PLA/β-TCP) reinforced composite scaffolds (double-channel composite scaffold) to improve their tissue regeneration capability and the mechanical properties. MethodsThe designed double-channel structure inside the ceramic scaffold consisted of both primary and secondary micropipes, which parallel but un-connected. The set of primary channels was used for cell ingrowth, while the set of secondary channels was used for the PLA perfusion. Integration technology of 3-D printing technique and gel-casting was firstly used to fabricate the double-channel ceramic scaffolds. PLA/β-TCP composite scaffolds were obtained by the polymer gravity perfusion process to pour PLA solution into the double-channel ceramic scaffolds through the secondary channel set. Microscope, porosity, and mechanical experiments for the standard samples were used to evaluate the composite properties. The ceramic scaffold with only the primary channel (single-channel scaffold) was also prepared as a control. ResultsMorphology observation results showed that there was no PLA inside the primary channels of the double-channel composite scaffolds but a dense interface layer between PLA and β-TCP obviously formed on the inner wall of the secondary channels by the PLA penetration during the perfusion process. Finite element simulation found that the compressive strength of the double-channel composite scaffold was less than that of the single-channel scaffold; however, mechanical tests found that the maximum compressive strength of the double-channel composite scaffold[(21.25±1.15) MPa] was higher than that of the single-channel scaffold[(9.76±0.64) MPa]. ConclusionThe double-channel composite scaffolds fabricated by 3-D printing technique have controlled complex micropipes and can significantly enhance mechanical properties, which is a promising strategy to solve the contradiction of strength and high-porosity of the ceramic scaffolds for the bone tissue engineering application.
ObjectiveTo study the effect of three-dimensional (3D) printed β-tricalcium phosphate (β-TCP) scaffold loaded poly (lactide-co-glycolide) (PLGA) anti-tuberculosis drug sustained release microspheres on osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) and its cytotoxicity.MethodsIsoniazid and rifampicin/PLGA sustained release microspheres were prepared by W/O/W multiple emulsion method. The β-TCP scaffolds were prepared by 3D printing technique. The microspheres were loaded on the scaffolds by centrifugal oscillation method to prepare composite materials. The BMSCs of Sprague Dawley rat were isolated and cultured by whole bone marrow adherent method, and the third generation cells were used for the following experiments. BMSCs were co-cultured with osteogenic induction medium (group A), PLGA anti-tuberculosis drug sustained release microsphere extract (group B), 3D printed β-TCP scaffold extract (group C), and 3D printed β-TCP scaffold loaded PLGA anti-tuberculosis drug sustained release microsphere composite extract (group D), respectively. Cytotoxicity was detected by cell counting kit 8 (CCK-8) method; the calcium deposition was observed by alizarin red staining; and the mRNA expressions of alkaline phosphatase (ALP), osteocalcin (OCN), and bone sialoprotein (BSP) were detected by real-time fluorescence quantitative PCR (RT-qPCR).ResultsCCK-8 assay showed that the absorbance (A) value of groups A, B, C, and D increased gradually with the culture time prolonging. After cultured for 24, 48, and 72 hours, the A value decreased in the order of groups A, C, B, and D. There was no significant difference between groups B and D (P>0.05), but there were significant differences between other groups (P<0.05). The cytotoxicity was evaluated as grade 0-2, and the toxicity test was qualified. Alizarin red staining showed that red mineralized nodules were formed in all groups at 21 days after osteogenic induction, but the number of mineralized nodules decreased sequentially in groups C, D, A, and B. RT-qPCR test results showed that the relative expressions of OCN and BSP genes in groups A, B, C, and D increased gradually with the culture time prolonging. The relative expression of ALP gene increased at 7 and 14 days, and decreased at 21 days. After cultured for 7, 14, and 21 days, the relative expressions of ALP, OCN, and BSP genes decreased sequentially in groups C, D, A, and B; the differences were significant between groups at different time points (P<0.05).Conclusion3D printed β-TCP loaded PLGA anti-tuberculosis drug sustained release microsphere composites have no obvious cytotoxicity to BMSCs, and can promote BMSCs to differentiate into osteoblasts to a certain extent.
ObjectiveTo explore the osteogenesis effect of advanced-platelet-rich fibrin (A-PRF) and β-tricalcium phosphate (β-TCP) composite. MethodsThirty-two healthy female New Zealand rabbits were randomly selected. A-PRF was prepared by collecting blood from middle auricular artery. Rabbits were randomly divided into 6 groups: groups A, B, C, D, and E (6 rabbits in each group) and group F (2 rabbits). Bone defects (6 mm in diameter, 8 mm in depth) were drilled into femur condyle of each rabbit’s both back legs. Then A-PRF and β-TCP composites manufactured by different proportion were planted into bone defects of group A (1∶1), group B (2∶1), group C (4∶1), group D (1∶2) and group E (1∶4) (V/V). The bone defect was not repaired in group F. The specimens were collected at 8 and at 12 weeks after operation. Then gross observation, X-ray examination, Micro-CT examination, and biomechanical test were performed. The bone volume/total volume (BV/TV), trabecular number (Tb.N), trabecular thickness (Tb.Th), and trabecular spacing (Tb.Sp), compressive strength, and modulus of elasticity were calculated. ResultsThe gross observation and X-ray examination showed that the osteogenesis effect at 12 weeks was better than that at 8 weeks. At the same time point, the repair of bone defect and the formation of new bone in group B were better than those in other groups. Micro-CT examination showed that the trabeculae of new bone in group B were the most and the trabeculae arranged closely at 8 and 12 weeks. Besides there were significant differences in BV/TV, Tb.N, and Tb.Sp between group B and the other groups (P<0.05). There were significant differences in Tb.N and Tb.Th in group B, BV/TV and Tb.Sp in group C, Tb.Sp in group D between 8 weeks and 12 weeks (P<0.05). Biomechanical tests showed that the compression strength and elastic modulus of group B were the highest, and the compression strength and elastic modulus of group C were the lowest at 8 and at 12 weeks, showing significant differences (P<0.05). There were significant differences in compression strength and elastic modulus of each group between 8 weeks and 12 weeks (P<0.05). ConclusionThe A-PRF and β-TCP composite can repair femoral condylar defects in rabbits, and the osteogenesis is better in proportion of 2∶1.
ObjectiveTo evaluate the biological effect on vascularization during bone repair of prevascularized porous β-tricalcium phosphate (β-TCP) tissue engineered bone (hereinafter referred to as prevascularized tissue engineered bone), which was established by co-culture of endothelial progenitor cells (EPCs) and bone marrow mesenchymal stem cells (BMSCs) based on tissue engineering technology. Methods EPCs and BMSCs were isolated from iliac bone marrow of New Zealand white rabbits by density gradient centrifugation and differential adhesion method. The cells were identified by immunophenotypic detection, BMSCs-induced differentiation, and EPCs phagocytosis. After identification, the third-generation cells were selected for subsequent experiments. First, in vitro tubule formation in EPCs/BMSCs direct contact co-culture (EPCs/BMSCs group) was detected by Matrigel tubule formation assay and single EPCs (EPCs group) as control. Then, the prevascularized tissue engineered bone were established by co-culture of EPCs/BMSCs in porous β-TCP scaffolds for 7 days (EPCs/BMSCs group), taking EPCs in porous β-TCP scaffolds as a control (EPCs group). Scanning electron microscopy and laser scanning confocal microscopy were used to observe the adhesion, proliferation, and tube formation of cells. Femoral condyle defect models of 12 New Zealand white rabbits were used for implantation of prevascularized tissue engineered bone as the experimental group (n=6) and porous β-TCP scaffold as the control group (n=6). The process of vascularization of β-TCP scaffolds were observed. The numbers, diameter, and area fraction of neovascularization were quantitatively evaluated by Microfill perfusion, Micro-CT scanning, and vascular imaging under fluorescence at 4 and 8 weeks. ResultsThe isolated cells were BMSCs and EPCs through identification. EPCs/BMSCs co-culture gradually formed tubular structure. The number of tubules and branches, and the total length of tubules formed in the EPCs/BMSCs group were significantly more than those in the EPCs group on Matrigel (P<0.05) after 6 hours. After implanting and culturing in porous β-TCP scaffold for 7 days, EPCs formed cell membrane structure and attached to the material in EPCs group, and the cells attached more tightly, cell layers were thicker, the number of cells and the formation of tubular structures were significantly more in the EPCs/BMSCs group than in the EPCs group. At 4 weeks after implantation, neovascularization was observed in both groups. At 8 weeks, remodeling of neovascularization occurred in both groups. The number, diameter, and area fraction of neovascularization in the experimental group were higher than those in the control group (P<0.05), except for area fraction at 4 weeks after implantation (P>0.05). ConclusionThe prevascularized tissue engineered bone based on direct contact co-culture of BMSCs and EPCs can significantly promote the early vascularization process during bone defects repair.
ObjectiveTo study the preparation and properties of the hyaluronic acid (HA)/α-calcium sulfate hemihydrate (α-CSH)/β-tricalcium phosphate (β-TCP) material (hereinafter referred to as composite material). Methods Firstly, the α-CSH was prepared from calcium sulfate dihydrate by hydrothermal method, and the β-TCP was prepared by wet reaction of soluble calcium salt and phosphate. Secondly, the α-CSH and β-TCP were mixed in different proportions (10∶0, 9∶1, 8∶2, 7∶3, 5∶5, and 3∶7), and then mixed with HA solutions with concentrations of 0.1%, 0.25%, 0.5%, 1.0%, and 2.0%, respectively, at a liquid-solid ratio of 0.30 and 0.35 respectively to prepare HA/α-CSH/ β-TCP composite material. The α-CSH/β-TCP composite material prepared with α-CSH, β-TCP, and deionized water was used as the control. The composite material was analyzed by scanning electron microscope, X-ray diffraction analysis, initial/final setting time, degradation, compressive strength, dispersion, injectability, and cytotoxicity. ResultsThe HA/α-CSH/β-TCP composite material was prepared successfully. The composite material has rough surface, densely packed irregular block particles and strip particles, and microporous structures, with the pore size mainly between 5 and 15 μm. When the content of β-TCP increased, the initial/final setting time of composite material increased, the degradation rate decreased, and the compressive strength showed a trend of first increasing and then weakening; there were significant differences between the composite materials with different α-CSH/β-TCP proportion (P<0.05). Adding HA improved the injectable property of the composite material, and it showed an increasing trend with the increase of concentration (P<0.05), but it has no obvious effect on the setting time of composite material (P>0.05). The cytotoxicity level of HA/α-CSH/β-TCP composite material ranged from 0 to 1, without cytotoxicity. Conclusion The HA/α-CSH/β-TCP composite materials have good biocompatibility. Theoretically, it can meet the clinical needs of bone defect repairing, and may be a new artificial bone material with potential clinical application prospect.