ObjectiveTo review the research progress of constructing injectable tissue engineered adipose tissue by adipose-derived stem cells (ADSCs). MethodsRecent literature about ADSCs composite three-dimensional scaffold to construct injectable tissue engineered adipose tissue is summarized, mainly on the characteristics of ADSCs, innovation of injectable scaffold, and methods to promote blood supply. ResultsADSCs have a sufficient amount and powerful ability such as secretion, excellent compatibility with injectable scaffold, plus with methods of promoting blood supply, which can build forms of injectable tissue engineered adipose tissue. ConclusionIn despite of many problems to be dealt with, ADSCs constructing injectable tissue engineered adipose tissue may provide a promising source for soft-tissue defect repair and plastic surgery.
ObjectiveTo evaluate the effect of using Schwann-like cells derived from human umbilical cord blood mesenchymal stem cells (hUCBMSCs) as the seed cells to repair large sciatic nerve defect in rats so as to provide the experimental evidence for clinical application of hUCBMSCs. MethodsFourty-five male Sprague Dawley (SD) rats in SPF grade, weighing 200-250 g, were selected. The hUCBMSCs were harvested and cultured from umbilical cord blood using lymphocyte separating and high molecular weight hydroxyethyl starch, and then was identified. The hUCBMSCs of 3rd generation were induced to Schwann-like cells, and then was identified by chemical derivatization combined with cytokine. The acellular nerve basal membrane conduit was prepared as scaffold material by the sciatic nerve of SD rats through repeated freezing, thawing, and washing. The tissue engineered nerve was prepared after 7 days of culturing Schwann-like cells (1×107 cells/mL) on the acellular nerve basal membrane conduit using the multi-point injection. The 15 mm sciatic nerve defect model was established in 30 male SD rats, which were randomly divided into 3 groups (10 rats each group). Defect was repaired with tissue engineered nerve in group A, with acellular nerve basal membrane conduit in group B, and with autologous sciatic nerve in group C. The nerve repair was evaluated through general observation, sciatic function index (SFI), nerve electrophysiology, weight of gastrocnemius muscle, and Masson staining after operation. ResultsThe hUCBMSCs showed higher expression of surface markers of mesenchymal stem cells, and Schwann-like cells showed positive expression of glia cell specific markers such as S100b, glial fibrillary acidic protein, and P75. At 8 weeks after operation, the acellular nerve basal membrane conduit had no necrosis and liquefaction, with mild adhesion, soft texture, and good continuity at nerve anastomosis site in group A; group B had similar appearance to group A; adhesion of group C was milder than that of groups A and B, with smooth anastomotic stoma and no enlargement, and the color was similar to that of normal nerve. SFI were gradually decreased, group C was significantly greater than groups A and B, group A was significantly greater than group B (P<0.05). The compound action potential could be detected in anastomotic site of 3 groups, group C was significantly greater than groups A and B, and group A was significantly greater than group B in amplitude and conduction velocity (P<0.05). Atrophy was observed in the gastrocnemius of 3 groups; wet weight's recovery rate of the gastrocnemius of group C was significantly greater than that of groups A and B, and group A was significantly greater than group B (P<0.05). Masson staining showed that large nerve fibers regeneration was found in group A, which had dense and neat arrangement with similar fiber diameter. The density and diameter of medullated fibers, thickness of myelinated axon, and axon diameter of group C were significantly greater than those of groups A and B, and group A was significantly greater than group B (P<0.05). ConclusionTissue engineered nerves from hUCBMSCs-derived Schwann-like cells can effectively repair large defects of the sciatic nerve. hUCBMSCs-derived Schwann-like cells can be used as a source of seed cells in nerve tissue engineering.
ObjectiveTo review the research progress of the role of seed cells and related cytokines in angiogenesis of the vascularized tissue engineered bone. MethodsThe latest literature of tissue engineered bone angiogenesis was reviewed, including the common source of seed cells, biological characteristics, transformation mechanism, related cytokines, and signaling pathways in re-vascularization. ResultsMicrosurgery technique, genetic technique, and co-culture system of vascularized tissue engineered bone have developed to a new level. Moreover, both the induction of introduced pluripotent stem cells and vascular endothelial growth factor-angiopoietins 1 transfected mesenchymal stem cells and endothelial progenitor cells have some advantages for bone regeneration and vascularization. However, all the techniques were not used in clinical practice. ConclusionUsing techniques of genetically modified seed cells, related cytokines, and scaffolds may have bright prospects for building vascularized tissue engineered bone.
Abstract: Objective Using Amplex red fluorometric assay to detect the lysyl oxidase (LOX) enzyme activity in tissue engineered heart valve (TEHV). Methods Porcine aortic valves were decellularized with trypsin+ethylene diaminetetraacetic acid(EDTA), TritonX-100, and RNaseⅠ＋DNaseⅠ, then they were seeded by myo-fibroblasts that harvested from rats. Then they were fed with Dulbecco’s modified Eagle medium (DMEM) which contained high glucose for 27 days, they were fed with phenol red-free and serumfree DMEM for 24 hours, and the medium was harvested and used for LOX enzyme activity assays with the Amplex red fluorometric assay. And reverse transcription-polymerase chain reaction (RT-PCR) technique was used to analyze the expression of LOXmRNA in TEHV. Results All the samples produced measurable amounts of active LOX enzyme. The fluorescence units were 45.60±1.66, and the corresponding concentration of LOX enzyme were 0.123±0.003μg/ml. At the same time, all the samples expressed LOXmRNA. The expression of LOXmRNA was corresponding to the results of the Amplex red fluorometric assay. Conclusion It is feasible to detect the LOX enzyme activity in TEHV with the Amplex red fluorometric assay. And this assay gives a way to reflect that LOX plays an important role in collagen cross-linking of extracellar matrix in TEHV.
Objective To explore the possibility of constructing tissue engineered cartilage complex three-dimensional nano-scaffold with collagen type II and hyaluronic acid (HA) by electrospinning. Methods The three-dimensional porous nano-scaffolds were prepared by electrospinning techniques with collagen type II and HA (8 ∶ 1, W ∶ W), which was dissolved in mixed solvent of 3-trifluoroethanol and water (1 ∶ 1, V ∶ V). The morphology were observed by light microscope and scanning electron microscope (SEM). And the porosity, water absorption rate, contact angle, and degradation rate were detected. Chondrocytes were harvested from 1-week-old Japanese white rabbit, which was disgested by 0.25% trypsin 30 minutes and 1% collagenase overlight. The passage 2 chondrocytes were seeded on the nano-scaffold. The cell adhesion and proliferation were evaluated by cell counting kit 8 (CCK-8). The cell-scaffold composites were cultured for 2 weeks in vitro, and the biological morphology and extracelluar matrix (ECM) secretion were observed by histological analysis. Results The optimal electrospinning condition of nano-scaffold was 10% electrospinning solution concentration, 10 cm receiver distance, 5 mL/ h spinning injection speed. The scaffold had uniform diameter and good porosity through the light microscope and SEM. The diameter was 300-600 nm, and the porosity was 89.5% ± 25.0%. The contact angle was (35.6 ± 3.4)°, and the water absorption was 1 120% ± 34% at 24 hours, which indicated excellent hydrophilicity. The degradation rate was 42.24% ± 1.51% at 48 days. CCK-8 results showed that the adhesive rate of cells with scaffold was 169.14% ± 11.26% at 12 hours, and the cell survival rate was 126.03% ± 4.54% at 7 days. The histological and immunohistochemical staining results showed that the chondrocytes could grow well on the scaffold and secreted ECM. And the similar cartilage lacuma structure could be found at 2 weeks after co-culture, which suggested that hyaline cartilage formed. Conclusion The collage type II and HA complex three-dimensional nano-scaffold has good physicochemical properties and excellent biocompatibility, so it can be used as a tissue engineered cartilage scaffold.
Objective To review the latest researches of Tenomodulin in tendon tissue engineering, to predict the progress of research and application of Tenomodulin. Methods The literature concerning Tenomodulin in tendon tissue engineering was collected and analyzed. Results Tenomodulin is a type II transmembrane glycoprotein that can regulate growth of tendon and contains a C-terminal anti-angiogenic domain. The human Tenomodulin gene spans approximately 1 360 bp and is mapped to Xq22.1. The expression of Tenomodulin is regulated by various biological factors, especially Scleraxis; and the nature and structure of scaffold material as well as the stain loading and cell passage, can modulate the expression of Tenomodulin. Conclusion Tenomodulin, as relatively specific molecule makers for tendon and containing a C-terminal anti-angiogenic domain, is expected to play a significant role in tendon tissue engineering.
Objective To study the osteogenic effects of a new type of peptides anchored aminated-poly-D, L-lactide acid (PA/PDLLA) scaffold in repairing femoral defect in rats. Methods The PDLLA scaffolds were treated by ammonia plasma and subsequent anchor of Gly-Arg-Gly-Asp-Ser (GRGDS) peptides via amide linkage formation. Thus PA/PDLLA scaffolds were prepared. The bone marrow was harvested from the femur and tibia of 4 4-week-old Sprague Dawley (SD) rats, and bone marrow mesenchymal stem cells (BMSCs) were isolated and cultured by whole bone marrow adherence method. BMSCs-scaffold composites were prepared by seeding osteogenic-induced BMSCs at passages 3-6 on the PA/PDLLA and PDLLA scaffolds. The right femoral defects of 8 mm in length were prepared in 45 adult male SD rats (weighing, 350-500 g) and the rats were divided into 3 groups (n=15) randomly. BMSCs-PA/PDLLA (PA/PDLLA group) or BMSCs-PDLLA (PDLLA group) composites were used to repair defects respectively, while defects were not treated as blank control (blank control group). General state of the rats after operation was observed. At 4, 8, and 12 weeks after operation, general, radiological, histological, micro-CT observations and real-time fluorescent quantitative PCR were performed. Results Two rats died after operation, which was added; the other rats survived to the end of the experiment. At each time point after operation, general and radiological observations showed more quick and obvious restoration in PA/PDLLA group than in PDLLA group; no bone repair was observed in blank control group. The X-ray scores were the highest in PA/PDLLA group, higher in PDLLA group, and the lowest in blank control group; showing significant difference in multiple comparison at the other time (P lt; 0.05) except between blank control group and PDLLA group at 4 weeks (P gt; 0.05). The X-ray scores showed an increasing trend in PDLLA group and PA/PDLLA group with time (P lt; 0.05). Histological and micro-CT observations showed the best osteogenesis in PA/PDLLA group, better in PDLLA group, and worst in blank control group. Comparison between groups had significant differences (P lt; 0.05) in bone mineral density, bone volume/total volume of range of interest, trabecular number, and structure model index. Significant differences (P lt; 0.05) were found in the expression levels of osteogenesis-related genes, such as osteocalcin, alkaline phosphatase, collagen type I, bone morphogenetic protein 2, and osteopontin when compared PA/PDLLA group with the other groups by real-time fluorescent quantitative PCR analysis. Conclusion The PA/PDLLA scaffolds can accelerate the repair of femoral defects in rats.
Objective To fabricate a novel composite scaffold with acellular demineralized bone matrix/acellular nucleus pulposus matrix and to verify the feasibility of using it as a scaffold for intervertebral disc tissue engineering through detecting physical and chemical properties. Methods Pig proximal femoral cancellous bone rings (10 mm in external diameter, 5 mm in internal diameter, and 3 mm in thickness) were fabricated, and were dealed with degreasing, decalcification, and decellularization to prepare the annulus fibrosus phase of scaffold. Nucleus pulposus was taken from pig tails, decellularized with Triton X-100 and deoxycholic acid, crushed and centrifugalized to prepare nucleus pulposus extracellular mtrtix which was injected into the center of annulus fibrosus phase. Then the composite scaffold was freeze-dryed, cross-linked with ultraviolet radiation/carbodiimide and disinfected for use. The scaffold was investigated by general observation, HE staining, and scanning electron microscopy, as well as porosity measurement, water absorption rate, and compressive elastic modulus. Adipose-derived stem cells (ADSCs) were cultured with different concentrations of scaffold extract (25%, 50%, and 100%) to assess cytotoxicity of the scaffold. The cell viability of ADSCs seeded on the scaffold was detected by Live/Dead staining. Results The scaffold was white by general observation. The HE staining revealed that there was no cell fragments on the scaffold, and the dye homogeneously distributed. The scanning electron microscopy showed that the pore of the annulus fibrosus phase interconnected and the pore size was uniform; acellular nucleus pulposus matrix microfilament interconnected forming a uniform network structure, and the junction of the scaffold was closely connected. The novel porous scaffold had a good pore interconnectivity with (343.00 ± 88.25) µm pore diameter of the annulus fibrosus phase, 82.98% ± 7.02% porosity and 621.53% ± 53.31% water absorption rate. The biomechanical test showed that the compressive modulus of elasticity was (89.07 ± 8.73) kPa. The MTT test indicated that scaffold extract had no influence on cell proliferation. Live/Dead staining showed that ADSCs had a good proliferation on the scaffold and there was no dead cell. Conclusion Novel composite scaffold made of acellular demineralized bone matrix/acellular nucleus pulposus matrix has good pore diameter and porosity, biomechanical properties close to natural intervertebral disc, non-toxicity, and good biocompatibility, so it is a suitable scaffold for intervertebral disc tissue engineering.
Objective To explore heterotopic chondrogenesis of canine myoblasts induced by cartilage-derived morphogenetic protein 2 (CDMP-2) and transforming growth factor β1 (TGF-β1) which were seeded on poly (lactide-co-glycolide) (PLGA) scaffolds after implantation in a subcutaneous pocket of nude mice. Methods Myoblasts from rectus femoris of 1-year-old Beagle were seeded on PLGA scaffolds and cultured in medium containing CDMP-2 and TGF-β1 for 2 weeks in vitro. Then induced myoblasts-PLGA scaffold, uninduced myoblasts-PLGA scaffold, CDMP-2 and TGF-β1-PLGA scaffold, and simple PLGA scaffold were implanted into 4 zygomorphic back subcutaneous pockets of 24 nude mice in groups A, B, C, and D, respectively. At 8 and 12 weeks, the samples were harvested for general observation, HE staining and toluidine blue staining, immunohistochemical staining for collagen type I and collagen type II; the mRNA expressions of collagen type I, collagen type II, Aggrecan, and Sox9 were determined by RT-PCR, the glycosaminoglycans (GAG) content by Alician blue staining, and the compressive elastic modulus by biomechanics. Results In group A, cartilaginoid tissue was milky white with smooth surface and slight elasticity at 8 weeks, and had similar appearance and elasticity to normal cartilage tissue at 12 weeks. In group B, few residual tissue remained at 8 weeks, and was completely degraded at 12 weeks. In groups C and D, the implants disappeared at 8 weeks. HE staining showed that mature cartilage lacuna formed of group A at 8 and 12 weeks; no cartilage lacuna formed in group B at 8 weeks. Toluidine blue staining confirmed that new cartilage cells were oval and arranged in line, with lacuna and blue-staining positive cytoplasm and extracellular matrix in group A at 8 and 12 weeks; no blue metachromatic extracellular matrix was seen in group B at 8 weeks. Collagen type I and collagen type II expressed positively in group A, did not expressed in group B by immunohistochemical staining. At 8 weeks, the mRNA expressions of collagen type I, collagen type II, Aggrecan, and Sox9 were detected by RT-PCR in group A at 8 and 12 weeks, but negative results were shown in group B. The compressive elastic modulus and GAG content of group A were (90.79 ± 1.78) MPa and (10.20 ± 1.07) μg/mL respectively at 12 weeks, showing significant differences when compared with normal meniscus (P lt; 0.05). Conclusion Induced myoblasts-PLGA scaffolds can stably express chondrogenic phenotype in a heterotopic model of cartilage transplantation and represent a suitable tool for tissue engineering of menisci.
Objective To review the decellularized methods for obtaining extracellular matrix (ECM) and the applications of decellularized ECM scaffold in tissue engineering. Methods Recent and related literature was extensively and comprehensively reviewed. The decellularized methods were summarized and classified. The effects of different sterilization methods on decellularized scaffolds were analyzed; the evaluation criterion of extent of decellularization was put forward; and the application of decellularized ECM scaffold in different tissues and organs engineering field was summarized. Results The decellularized methods mainly include physical methods, chemical methods, and biological methods, and different decellularization methods have different effects on the extent of cell removal and ECM composition and structure. Therefore, the best decellularization method will be chosen according to the characteristics of the tissues and decellularization methods to achieve the ideal result. Conclusion It is very important to choose the appropriate decellularized method for preparing the biological materials desired by tissue engineering. The biological scaffolds prepared by decellularized methods will play an important role in tissue engineering and regenerative medicine.