[Abstract]Acute type A aortic dissection is a lethal disease that requires immediate surgical intervention and lifesaving measures. The treatment of this condition primarily involves addressing the complex structure and vital role of the aortic root. Since 1968, surgical techniques for Aortic dissection type A have rapidly advanced, resulting in significantly improved patient outcomes. In recent years, various approaches to aortic root management have emerged. This article provides a comprehensive overview of these approaches.
ObjectiveTo evaluate the feasibility and safety of three-dimensional (3D) printed drill guide template-assisted percutaneous pedicle screw fixation for multiple-level thoracolumbar fractures.MethodsClinical data of 19 patients with multilevel thoracolumbar fracture without nerve injury who underwent surgical treatment between May 2017 and January 2019 were retrospectively analyzed. There were 9 males and 10 females and their age ranged from 22 to 63 years, with an average age of 43.6 years. Injury cause included traffic accident injury in 12 cases, and fall from height injury in 7 cases. A total of 40 fractured vertebrae were involved in T10 to L3 levels. According to AO classification, there were 29 fractures of type A1, 9 fractures of type A2, and 2 fractures of type A3. According to TANG Sanyuan classification, multiple-segment thoracolumbar fractures were classified as 17 cases of type ⅠA, 1 case of type ⅠB, and 1 case of type ⅡC. The time from injury to operation was 2-6 days, with an average of 3.1 days. The 3D-printed universal drill guide template was used for assisting percutaneous pedicle screw fixation during operation. Intraoperative blood loss, average operation time and fluoroscopy frequency of each screw were recorded. Visual analogue scale (VAS) score was used to evaluate the improvement of low back pain before operation, at 3 days after operation, and at last follow-up. According to the CT at 3 days after operation, the Gertzbein and Robbins scales were used to evaluate the accuracy of screw insertion (the grade A and grade B were regarded as accuracy, the grade A was regarded as excellent of screw insertion). The Cobb angle in sagittal plane of the fracture segment was measured, and the percentage of anterior edge of injured vertebral height was calculated. The consistency of the inclination of bilateral pedicle screws were analyzed postoperatively, and compared the angle of the intraoperative guide plate with the inclination of screw to verify the effectiveness of the guide plate in controlling the inclination.ResultsAll the 19 patients completed the operation successfully, and the intraoperative blood loss was 44-67 mL, with an average of 54.3 mL. The average operation time for each screw insertion was 7.3-11.1 minutes, with an average of 9.6 minutes. The average fluoroscopy frequency of each screw insertion was 1.6-2.5 times, with an average of 2.0 times. No spinal cord, nerve root injury, infection, and other complications occurred. All patients were followed up 24-38 months, with an average of 28.7 months. The accuracy of pedicle screws was evaluated by using Gertzbein and Robbins scales: 145 screws were grade A and 11 screws were grade B. The accuracy of screw insertion was 100% and the excellent rate was 92.9%. The CT data at 3 days after operation showed no significant difference in the inclination between the left and right screws in the same vertebral body (t=0.93, P=0.36). There was no significant difference between the angle of guide plate and the screw inclination (P>0.05). The VAS score, Cobb angle in sagittal plane, and the percentage of anterior edge of injured vertebral height were significantly improved at 3 days after operation and at last follow-up, and the VAS score was declined at last follow-up compared with 3 days after operation, all showing significant differences (P<0.05). There was no significant difference in the sagittal Cobb angle and the percentage of anterior edge of injured vertebral height between two postoperative time points (P>0.05). At last follow-up, no internal fixators were loosened or broken, and all fractures healed well.ConclusionFor the multiple-level thoracolumbar fractures, 3D-printed drill guide template assisting percutaneous pedicle screw fixation can reduce the operation time, intraoperative blood loss, and fluoroscopy frequency and the screw insertion is accurate and has a good reduction effect.
Objective To observe and evaluate the clinical effect of the new fenestration rammer in the treatment of thoracolumbar burst fracture by posterior internal fixation and reduction of lamina with finite fenestration decompression. Methods Patients with thoracolumbar burst fractures admitted to Zigong Fourth People’s Hospital between September 2017 and January 2020 were retrospectively selected. The patients were divided into observation group and control group according to different surgical methods. The observation group used a new tamping device with finite fenestration rammer of unilateral lamina to reduce the spinal occupying bone mass, and the control group used conventional instruments for reduction of intraspinal fracture masses. The operation time, intraoperative blood loss, CT measurement of sagittal diameter ratio of spinal canal and the number of cases of postoperative vertebral empty shell phenomenon were recorded in the two groups, and Frankel grading evaluation of spinal nerve function was conducted. Results A total of 67 patients were included. There were 33 cases in the observation group and 34 cases in the control group. The patients in both groups were followed up for 12 to 16 months, with an average of (14.45±2.25) months. The improvement rate of Frankel rating in each group was 100%. In the control group and the observation group, except for the sagittal diameter ratio of spinal canal before operation (P=0.616), the operation time [(150.44±26.47) vs. (120.91±20.86) min], the intraoperative blood loss [(244.41±42.97) vs. (183.33±34.56) mL], the sagittal diameter ratio of spinal canal one week after operation [(92.50±2.32)% vs. (93.72±2.40)%], the sagittal diameter ratio of spinal canal at the last follow-up [(91.50±2.96)% vs. (93.17±3.27)%] and the occurrence of empty shell phenomenon (13 vs. 5 cases) were statistically significant (P<0.05). The intragroup comparison showed that the sagittal diameter ratio of spinal canal was improved one week after operation and at the last follow-up compared with that before operation (P<0.05), there was no significant difference in the sagittal diameter ratio of spinal canal between one week after operation and the last follow-up (P>0.05). Conclusions The new fenestration rammer can effectively reduce the spinal occupying bone mass in thoracolumbar burst fracture, effectively restore the volume of the spinal canal, achieve the purpose of decompression, effectively prevent the formation of vertebral shell, maximize the retention of the stable structure of the posterior column, and avoid iatrogenic nerve injury. It is safe and effective.
ObjectiveTo evaluate the safety of photoelectric guided navigation unilateral puncture of the percutaneous kyphoplasty (PKP) in the treatment of thoracolumbar osteoporotic vertebral compression fracture (OVCF).MethodsA randomized controlled clinical research was performed between June 2015 and January 2017. Eighty-five cases of OVCF were treated with photoelectric guided navigation unilateral puncture of the PKP (trial group, 43 cases) or C arm fluoroscopy unilateral puncture of the PKP (control group, 42 cases) respectively. There was no significant difference in gender, age, disease duration, segmental fracture, AO classification, bone mineral density, and preoperative visual analogue scale (VAS) score between 2 groups (P>0.05). The concordance rate of puncture path and design path, the incidence of pedicle wall breaking, the incidence of bone cement leakage, and the rate of bone cement distribution center were observed and calculated on postoperative CT images; the intraoperative X-ray exposure frequency, frequency of puncture, operation time, VAS scores before operation and at 2 days after operation, and postoperative blood vessel or nerve injury were recorded and compared.ResultsThe intraoperative X-ray exposure frequency and puncture frequency in trial group were significantly less than those in control group (P<0.05), but there was no significant difference in operation time between 2 groups (t=0.440, P=0.661). The VAS scores of 2 groups at 2 days after operation were significantly improved when compared with preoperative ones (P<0.05), but there was no significant difference in VAS score at 2 days after operation between 2 groups (t=0.406, P=0.685). All the patients were followed up 6-18 months (mean, 10 months). No blood vessel or nerve injury occurred in 2 groups. The incidence of pedicle wall breaking, the incidence of bone cement leakage, the concordance rate of puncture path and design path, and the rate of bone cement distribution center in trial group were 2.33% (1/43), 2.33% (1/43), 86.05% (37/43), and 88.37% (38/43) respectively, all showing significant differences when compared with those of control group [19.05% (8/42), 21.43% (9/42), 45.24% (19/42), and 50.00% (21/42) respectively] (P<0.05).ConclusionIntraoperative photoelectric guided navigation unilateral puncture of the PKP can improve the success rate of target puncture and reduce the incidence of pedicle wall breaking effectively, and achieve better bone cement distribution and better security.
ObjectiveTo investigate the distance between the screw-out point and the middle sacral artery, and evaluate the safety when the S1 pedicle screw placed by the three cortical fixation techniques.MethodsFrom March to June 2018, randomized CT scan data of 98 adult pelvic angiography were selected to measure the distance from the middle sacral artery to the anterior edge of the vertebral body (a) and the distance from the middle sacral artery to the midline of the vertebral body (b). S1 screw entry point was set as the intersection of lines where extension of S1 facet joint inferior margin and lateral margin cross over. Introversion angles of 10, 15, 20, and 25° were used; the distance between the screw insertion point and the middle sacral artery (d) was measured.ResultsThe middle sacral artery was usually located on the left side of the upper endplate plane of S1. The distance a was (5.40±2.95) mm in 49 males and (4.43±2.32) mm in 49 females, and the difference between the males and females was not statistically significant (t=1.818, P=0.72). The distance b was (12.07±5.42) mm in 45 males and (14.12±4.88) mm in 48 females, and the difference between the males and females was not statistically significant (t=–1.914, P=0.59). The distance d was (12.67±6.00), (9.40±5.17), (7.50±3.76), and (8.10±3.64) mm when the nail was placed at a common internal inclination of 10, 15, 20, and 25°. The differences in the distance d at a common internal inclination of 10° vs. 15°, 10° vs. 20°, 10° vs. 25°, and 15° vs. 20° were all statistically significant (t=16.828, 11.609, 6.073, 6.254; P<0.008 3); there was no statistically significant difference in that at 15°vs. 25°, or 20° vs. 25° (t=2.034, –1.723; P>0.05).ConclusionBy analyzing the relationship between the middle sacral artery and the upper endplate plane of the S1 vertebra, the risk of middle artery injury is small while the biomechanical stability of the screw is increased when using the Lenham method.
ObjectiveTo evaluate the effectiveness of Curved Diffusion Needle in unilateral percutaneous vertebroplasty (PVP) by compared with bilateral PVP. MethodsA clinical data of 93 patients with osteoporotic vertebral compression fracture (OVCF) treated with PVP between January 2020 and January 2021 was retrospectively analyzed, including 47 patients underwent unilateral PVP assisted with Curved Diffusion Needle (unilateral group) and 46 patients underwent bilateral PVP (bilateral group). There was no significant difference in gender, age, cause of injury, time from injury to operation, T value of bone mineral density, AO classification, distribution of injured vertebrae, and preoperative visual analogue scale (VAS) score, Oswestry disability index (ODI), relative height of injured vertebrae, and Cobb angle between the two groups (P>0.05). The operation time, the amount of bone cement injection, the incidence of bone cement leakage, the bone cement diffusion distribution, VAS score, ODI, the relative height of injured vertebrae, and Cobb angle were recorded and compared between the two groups. Results All operations successfully completed. The operation time was significantly shorter in unilateral group than in bilateral group (t=−13.936, P=0.000), and the amount of bone cement injection was significantly less in unilateral group than in bilateral group (t=−13.237, P=0.000). The incidence of bone cement leakage in unilateral group was 19.14%, which was significantly lower than that in bilateral group (39.13%) (χ2=4.505, P=0.034). The score of bone cement distribution in unilateral group was 7.0±1.3, of which 41 cases were excellent and 6 cases were well. The score of bilateral group was 7.4±0.8, of which 43 cases were excellent and 3 cases were well. There was no significant difference in score and grading of bone cement distribution between the two groups (t=−1.630, P=0.107; Z=−1.013, P=0.311). All patients were followed up and the follow-up time was 3-10 months (mean, 6.5 months) in unilateral group and 3-10 months (mean, 6.1 months) in bilateral group. The VAS score, ODI, the relative height of injured vertebrae, and Cobb angle at 24 hours after operation and last follow-up were significantly better than those before operation in the two groups (P<0.05). There were significant differences in all indicators between 24 hours after operation and last follow-up (P<0.05). There was no significant difference in all indexes between the two groups (P>0.05) at the same time point after operation. During follow-up, there was no complication such as contralateral vertebral collapse, refracture, adjacent vertebral fracture, or local kyphosis in the two groups. ConclusionUnilateral PVP assisted with Curved Diffusion Needle for OVCF is beneficial to the distribution of bone cement, which can not only achieve similar effectiveness to bilateral PVP, but also achieve shorter operation time, less bone cement injection, and lower risk of bone cement leakage.
ObjectiveTo explore the feasibility of lumbar puncture models based on 3D printing technology for training junior orthopaedic surgeons to find the optimal pedicle screw insertion points.MethodsMimics software was used to design 3D models of lumbar spine with the optimal channels and alternative channels. Then, the printed lumbar spine models, plasticine, and cloth were used to build lumbar puncture models. From January 2018 to June 2019, 43 orthopedic trainees performed simulated operations to search for the insertion points of pedicle screws base on the models. The operations were performed once a day for 10 consecutive days, and the differences in operation scores and operation durations of the trainees among the 10 days were compared.ResultsAll the trainees completed the surgical training operations successfully, and there were significant differences in the operation scores (13.05±2.45, 14.02±3.96, 17.58±3.46, 21.02±2.04, 23.40±4.08, 25.14±3.72, 27.26±6.09, 33.37±4.23, 35.00±4.15, 38.49±1.70; F=340.604, P<0.001) and operation durations [(22.51±4.28), (19.93±4.28), (18.05±2.89), (17.05±1.76), (16.98±1.97), (15.47±1.74), (13.51±1.42), (12.60±2.17), (12.44±1.71), (11.91±1.87) minutes; F=102.359, P<0.001] among the 10 days.ConclusionThe 3D models of lumbar puncture are feasible and repeatable, which can contribute to surgical training.
ObjectiveTo investigate the effectiveness of the Evans lateral lengthening calcaneal osteotomy (E-LLCOT) in treatment of talocalcaneal coalition (TCC) with hindfoot valgus deformity.MethodsBetween January 2014 and October 2017, 10 patients (13 feet) of TCC with hindfoot valgus deformities underwent E-LLCOTs. There were 6 males (8 feet) and 4 females (5 feet) with an age of 13-18 years (mean, 15.8 years). The disease duration was 10-14 months (mean, 11.5 months). The foot deformity was characterized by hindfoot valgus, forefoot abduction, and collapse of the medial arch. Pain site was the tarsal sinus in 4 feet, TCC in 5 feet, and ankle joint in 4 feet. There were tightness of the gastrocnemius in 3 cases (4 feet) and Achilles tendon in 7 cases (9 feet) on Silverskiold test. The preoperative American Orthopaedic Foot and Ankle Society (AOFAS) ankle-hindfoot score was 46.54±9.08 and visual analogue scale (VAS) score was 6.54±0.88 after walking 1 kilometer. The AOFAS ankle-hindfoot score and VAS score were adopted to evaluate the postoperative function of the foot. The talar-first metatarsal angle (T1MT), talonavicular coverage angle (TCA), talar-horizontal angle (TH), calcaneal pitch angle (CP), and heel valgus angle (HV) were measured after operation.ResultsAll incisions healed by first intention. All patients were followed up 12-30 months (mean, 18 months). At last follow-up, the AOFAS ankle-hindfoot score and VAS score were 90.70±6.75 and 1.85±0.90, respectively, showing significant differences when compared with preoperative scores (t=−23.380, P=0.000; t=35.218, P=0.000). X-ray films showed that the osteotomy healed at 2-4 months (mean, 3 months) after operation. At last follow-up, the T1MT, TCA, TH, and HV were significantly lower than preoperative ones (P<0.05), and the CP was significantly higher than preoperative one (P<0.05). During the follow-up, the pain did not relieve obviously in 1 patient (1 foot), and the cutaneous branch of the sural nerve injured in 1 patient (1 foot).ConclusionFor TCC with severe hindfoot valgus deformity, E-LLCOT can effectively correct deformity and relieve pain.