A critical shortage of donor organs raises a question of needs for alternative organ sources for regenerative medicine. Over the last decade, three-dimensional (3D) culture has become a new approach for organ regeneration. The 3D culture takes significant advantages of cells spatial relationships between multiple cellular types and surrounding matrices of dynamic cellular interactions, which plays a key role in structural self-formation of complex organ buds. Here we present major classic cases of 3D culture organ regeneration to show how it works, and then we try to find the way of future organ regeneration.
ObjectiveTo investigate the biocompatibility and immunogenicity of the tracheal matrix decellularized by sodium perchlorate (NaClO4).MethodsBone marrow mesenchymal stem cells (BMSCs) were divided from 2-month-old New Zealand white rabbits. The trachea of 6-month-old New Zealand white rabbits were trimmed to a length of 1.5 cm and randomly divided into control group (group A1, n=5, just stripped the loose connective tissue outside the trachea) and experimental group (group B1, n=5, decellularized by improved NaClO4 immersion method). The cytotoxicity of the scaffold leaching solution was detected by MTT assay, and the major histocompatibility complex (MHC) expression was detected by immunohistochemical method. The 4th generation of BMSCs were seeded onto the scaffold of 2 groups, and the cell activity around the material was observed by inverted microscope after Giemsa staining at 48 hours, while the cells states on the scaffold were observed at 7 and 14 days after culturing by scanning electron microscope. Another 10 6-month-old New Zealand white rabbits were randomly divided into control group (group A2, n=5) and experimental group (group B2, n=5), which implanted the native trachea and decellularized tracheal matrix into the subcutaneous sac of the back neck, respectively. The serum immunoglobulin IgM and IgG contents were analysed at 5, 10, 15, 20, 25, and 30 days after operation, and HE staining observation was performed at 30 days after operation.ResultsMTT assay showed that the proliferation activity of BMSCs cultured in the leach liquor of group B1 was well, showing no significant difference when compared with group A1 and negative control group with pure culture medium (P>0.05). The immunohistochemical staining showed that the decellularized process could significantly reducing the antigenicity of matrix materials. Giemsa staining showed that BMSCs grew well around the two tracheal matrixs (groups A1 and B1) in vitro. Scanning electron microscope observation showed that the cells were attached to the outer wall of the tracheal material in group A1, which present a flat, round, oval shaped, tightly arranged cells and cluster distribution; and in group B1, the cells formed a single lamellar sheet cover the outer wall of the tracheal material, whose morphology was similar to that in group A1, and the growth trend was better. In vivo experimental results showed that the rejection of group B2 was lower than that of group A2. The contens of IgM and IgG in group A2 were significantly higher than those in group B2 at each time point after operation (P<0.05). HE staining showed no signs of rejection, macrophagocyte, or lymphocyte infiltration occurred, and the collagen fibers maintained their integrity in group B2.ConclusionThe decellularized matrix treated by NaClO4 has a fine biocompatibility, while its immunogenicity decreased, and it is suitable for the scaffold material for constructing of tissue engineered trachea.
The chemical extraction method was used to prepare the rat uterine decellularized scaffolds, and to investigate the feasibility of preparing the extracellular matrix (ECM) hydrogel. The rat uterus were collected and extracted by 1%sodium dodecyl sulfate (SDS), 3% TritonX-100 and 4% sodium deoxycholate (SDC) in sequence. Scanning electron microscopy, histochemical staining and immunohistochemistry was used to assess the degree of decellularization of rat uterine scaffold. The prepared decellularized scaffold was digested with pepsin to obtain a uterine ECM hydrogel, and the protein content of ECM was determined by specific ELISA kit. Meanwhile, the mechanical characteristic of ECM hydrogel was measured. The results showed that the chemical extraction method can effectively remove the cells effectively in the rat uterine decellularized scaffold, with the ECM composition preserved completely. ECM hydrogel contains a large amount of ECM protein and shows a good stability, which provides a suitable supporting material for the reconstruction of endometrium in vitro.
Objective To manufacture a poly (lactic-co-glycolic acid) (PLGA) scaffold by low temperature deposition three-dimensional (3D) printing technology, prepare a PLGA/decellularized articular cartilage extracellular matrix (DACECM) cartilage tissue engineered scaffold by combining DACECM, and further investigate its physicochemical properties. Methods PLGA scaffolds were prepared by low temperature deposition 3D printing technology, and DACECM suspensions was prepared by modified physical and chemical decellularization methods. DACECM oriented scaffolds were prepared by using freeze-drying and physicochemical cross-linking techniques. PLGA/DACECM oriented scaffolds were prepared by combining DACECM slurry with PLGA scaffolds. The macroscopic and microscopic structures of the three kinds of scaffolds were observed by general observation and scanning electron microscope. The chemical composition of DACECM oriented scaffold was analyzed by histological and immunohistochemical stainings. The compression modulus of the three kinds of scaffolds were measured by biomechanical test. Three kinds of scaffolds were embedded subcutaneously in Sprague Dawley rats, and HE staining was used to observe immune response. The chondrocytes of New Zealand white rabbits were isolated and cultured, and the three kinds of cell-scaffold complexes were prepared. The growth adhesion of the cells on the scaffolds was observed by scanning electron microscope. Three kinds of scaffold extracts were cultured with L-929 cells, the cells were cultured in DMEM culture medium as control group, and cell counting kit 8 (CCK-8) was used to detect cell proliferation. Results General observation and scanning electron microscope showed that the PLGA scaffold had a smooth surface and large pores; the surface of the DACECM oriented scaffold was rough, which was a 3D structure with loose pores and interconnected; and the PLGA/DACECM oriented scaffold had a rough surface, and the large hole and the small hole were connected to each other to construct a vertical 3D structure. Histological and immunohistochemical qualitative analysis demonstrated that DACECM was completely decellularized, retaining the glycosaminoglycans and collagen typeⅡ. Biomechanical examination showed that the compression modulus of DACECM oriented scaffold was significantly lower than those of the other two scaffolds (P<0.05). There was no significant difference between PLGA scaffold and PLGA/DACECM oriented scaffold (P>0.05). Subcutaneously embedded HE staining of the three scaffolds showed that the immunological rejections of DACECM and PLGA/DACECM oriented scaffolds were significantly weaker than that of the PLGA scaffold. Scanning electron microscope observation of the cell-scaffold complex showed that chondrocytes did not obviously adhere to PLGA scaffold, and a large number of chondrocytes adhered and grew on PLGA/DACECM oriented scaffold and DACECM oriented scaffold. CCK-8 assay showed that with the extension of culture time, the number of cells cultured in the three kinds of scaffold extracts and the control group increased. There was no significant difference in the absorbance (A) value between the groups at each time point (P>0.05). Conclusion The PLGA/DACECM oriented scaffolds have no cytotoxicity, have excellent physicochemical properties, and may become a promising scaffold material of tissue engineered cartilage.
ObjectiveTo preliminary explore the effect of decellularized adipose tissue (DAT) combined with vacuum sealing drainage (VSD) on wound inflammation in pigs.MethodsThe DAT was prepared through the process of freeze-thaw, enzymatic digestion, organic solvent extraction, and vacuum freeze-drying. The appearance of DAT was observed before and after freeze-drying. HE staining was used to observe its structure and acellular effect. Eighteen male Bama minipigs were recruited, and four dorsal skin soft tissue wounds in diameter of 4 cm were made on each pig and randomly divided into 4 groups for different treatments. The wounds were treated with DAT combined with VSD in DAT/VSD group, DAT in DAT group, VSD in VSD group, and sterile gauze dressing in control group. HE staining was performed at 3, 7, 10, and 14 days after treatment. Moreover, the expressions of inflammatory factors [interleukin 1β (IL-1β), IL-6, and tumor necrosis factor α (TNF-α)], as well as the phenotypes of M1 and M2 macrophage phenotypic markers [inducible nitric oxide synthase (iNOS) and arginase 1 (ARG-1)] were detected by real-time fluorescence quantitative PCR (qRT-PCR). ELISA was used to determine the content of iNOS and ARG-1.ResultsGeneral observation and HE staining showed that DAT obtained in this study had a loose porous structure without cells. The neutrophils of wounds were significantly less in DAT/VSD group than in control group and DAT group (P<0.05) at 3 days after treatment, and the difference was not significant (P>0.05) between DAT/VSD group and VSD group. And the neutrophils were significantly less in DAT/VSD group than in other three groups (P<0.05) at 7, 10, and 14 days. The mRNA expressions of IL-1β, IL-6, TNF-α, and iNOS were significantly lower in DAT/VSD group than in other three groups at 3, 7, 10, and 14 days (P<0.05), while the mRNA expression of ARG-1 was significantly higher in DAT/VSD group than in other three groups (P<0.05). ELISA showed that the content of iNOS was significantly lower in DAT/VSD group than in other three groups at 3, 7, 10, and 14 days (P<0.05), while the content of ARG-1 was significantly higher in DAT/VSD group than in other three groups (P<0.05).ConclusionDAT combined with VSD can significantly reduce inflammatory cell infiltration during wound healing, regulate the expressions of inflammatory factors and macrophage phenotype, and the effect is better than single use of each and conventional dressing change.
Decellularized extracellular matrix (dECM) has been widely used as a scaffold for regenerative medicine due to its high biomimetic and excellent biocompatibility. As a functional polymer material with high water content and controlled fluidity, hydrogel is very promising for some minimally invasive surgery in clinical practice. In recent years, with the rapid development of hydrogel theory and technology, dECM hydrogel has gradually become a research hotspot in the field of regenerative medicine. In this paper, the related researches in recent years are reviewed regarding the preparation of dECM hydrogel and its preclinical application. The future clinical use is also prospected.
Objective To investigate the construction of a novel tissue engineered meniscus scaffold based on low temperature deposition three-dimenisonal (3D) printing technology and evaluate its biocompatibility. Methods The fresh pig meniscus was decellularized by improved physicochemical method to obtain decellularized meniscus matrix homogenate. Gross observation, HE staining, and DAPI staining were used to observe the decellularization effect. Toluidine blue staining, safranin O staining, and sirius red staining were used to evaluate the retention of mucopolysaccharide and collagen. Then, the decellularized meniscus matrix bioink was prepared, and the new tissue engineered meniscus scaffold was prepared by low temperature deposition 3D printing technology. Scanning electron microscopy was used to observe the microstructure. After co-culture with adipose-derived stem cells, the cell compatibility of the scaffolds was observed by cell counting kit 8 (CCK-8), and the cell activity and morphology were observed by dead/live cell staining and cytoskeleton staining. The inflammatory cell infiltration and degradation of the scaffolds were evaluated by subcutaneous experiment in rats. Results The decellularized meniscus matrix homogenate appeared as a transparent gel. DAPI and histological staining showed that the immunogenic nucleic acids were effectively removed and the active components of mucopolysaccharide and collagen were remained. The new tissue engineered meniscus scaffolds was constructed by low temperature deposition 3D printing technology and it had macroporous-microporous microstructures under scanning electron microscopy. CCK-8 test showed that the scaffolds had good cell compatibility. Dead/live cell staining showed that the scaffold could effectively maintain cell viability (>90%). Cytoskeleton staining showed that the scaffolds were benefit for cell adhesion and spreading. After 1 week of subcutaneous implantation of the scaffolds in rats, there was a mild inflammatory response, but no significant inflammatory response was observed after 3 weeks, and the scaffolds gradually degraded. Conclusion The novel tissue engineered meniscus scaffold constructed by low temperature deposition 3D printing technology has a graded macroporous-microporous microstructure and good cytocompatibility, which is conducive to cell adhesion and growth, laying the foundation for the in vivo research of tissue engineered meniscus scaffolds in the next step.
Peripheral nerve injury (PNI) is a common neurological dysfunction. In clinical practice, autologous nerve transplantation is used to solve problems related to PNI, such as limited donor resources, neuroma formation and high donor incidence rate. Therefore, searching for new nerve regeneration materials has become a hot research topic. The decellularized extracellular matrix (dECM) hydrogel provides a scaffold for nerve regeneration by removing the cellular components in biological tissues, preserving the extracellular matrix, and is a potential therapeutic material for nerve regeneration. This article reviews the research progress of dECM hydrogel for PNI and looks forward to the clinical prospects of this research direction.